@article { author = {Sardashti, Ali Reza}, title = {Measurement of Low Amounts of Metal Ions in Water and Waste Water Sewage Using the Method of Potentiometer Stripping}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {32}, number = {1}, pages = {1-6}, year = {2013}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In sewages, various pollutants exist. So without refining, they should not return into life cycle. After refining, they result a mass of  digested sediments , containing organic materials such as humic acid, fulvic acid and minerals such as heavy metal ions can be washed out by hydrochloric acid 2M . Heavy metal ions are determined, identified, and quantified using the method of potentiometer stripping. In the present research, digested sediments of filter stations and drinking water of some french cities, namely Aix les-bans, Annecy, Montpellier and Chambery were analyzed. Low amounts of heavy metal ions were measured by this technique with higer sensitivty and proper accuracy. Detection limit of Cu+2 was determined 3.2´10-8 M at optimal time of electrolysis 32 minutes. The amount of Cu+2 in digested sediments of filter station of Montpellier city was 5.2 mmol/kg dry materials and its amount in drinking water of this city was estimated as 2.82 ppb. Capacity of cationic exchange of these humic acid containing sediments was determined by method of potentiometer titration in addition to batch method. It was known that the sites of sampling were very different, despite being located in a single region.}, keywords = {Metallic pollutant,Water and waste water,Potentiometer stripping method}, title_fa = {اندازه‌گیری مقدارهای کم یون‌های فلزی در آب و پساب با روش عاری‌سازی پتانسیومتری}, abstract_fa = {انواع آلاینده‌ها در پساب‌ها یافت می‌شوند، بنابراین نباید بدون پالایش به چرخه طبیعت باز گردانده شوند. پس از پالایش، رسوب‌های هضم شد‌ه‌ای به دست می ‌آید که دارای مواد آلی مانند هیومیک اسید و فولویک اسید و مواد معدنی مانند یون‌های فلزهای سنگین می‌باشند. شستشوی این رسوب‌ها با هیدروکلریک اسید 2 مولار باعث حذف فولویک اسید و یون‌های فلزهای سنگین می‌شود. یون‌های فلزهای سنگین با  روش عاریسازی پتانسیومتری شناسایی و تعیین مقدار می‌شوند. در این پژوهش رسوب‌های هضم شده ایستگاه‌های تصفیه و آب آشامیدنی شهرهای اکس لبن، انسی، مون پیله، شامبری فرانسه مورد تجزیه قرار گرفتند. مقدارهای یون‌های فلزهای سنگین با حساسیت بالا و دقت خوب توسط این  روش اندازه‌گیری شدند. حد تشخیص مس در زمان بهینه الکترولیز (32 دقیقه) 8-10 ´ 2/3 مولار تعیین شد. مقدار مس در رسوب هضم شده ایستگاه تصفیه شهر مون پیله 2/5 میلی مول بر کیلوگرم خشک و مقدار آن در آب آشامیدنی این شهر ppb82/2 تعیین شد. ظرفیت تبادل کاتیونی این رسوب‌های دارای هیومیک اسید افزون بر روش ناپیوسته با روش تیتراسیون پتانسیومتری نیز تعیین شد و معلوم شد با اینکه اغلب نقطه ‌های نمونه‌برداری در یک منطقه قرار دارند ولی خیلی متفاوتند.}, keywords_fa = {آلاینده‌های فلزی,آب و پساب,روش عاری سازی پتانسیومتری}, url = {https://www.nsmsi.ir/article_6062.html}, eprint = {https://www.nsmsi.ir/article_6062_cca2f6e9c023ba8dd4dbf17a86589adf.pdf} } @article { author = {Tahmooresi, Majid and Sarrafi, Amir and Iraj Mansouri, Abdolreza and Lashkari, Batool}, title = {Sorption of Copper, Zinc and Nickel on Ca-Bentonite}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {32}, number = {1}, pages = {7-16}, year = {2013}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {Clays and clay minerals specially montmorillonite and bentonite are widely used for environmental pollution control. The heavy metals are important environmental pollutants. In this study the sorption of copper, zinc and nickel ions as heavy metals by bentonite samples was investigated. Sample 1 from Kheir Abad mine, sample 2 from Tange Ghoochan mine and sample 3 from the mine around the Ravari mosque were prepared.  The sorption tests of copper, zinc and nickel ions by Kheir Abad Ca- bentonite sample were done. The results showed that the sorption very fast and for doing all tests the appropriate time was obtained 5 minutes. Also the results showed that the reduction of pH causes the reduction of copper, zinc & nickel ions sorption and also appropriate conditions for sorption of each ions were achieved. The sorption tests by other samples in obtained appropriate conditions for sample 1 were done. The results showed that among these samples, sample 2 has the highest percentage of sorption and sample 3 has the lowest  percentage of sorption. Also the results showed that the increase of CEC causes the increase of copper, zinc & nickel ions sorption. and sorption of nickel is less than sorption of copper and zinc. Finally these samples can be an excellent and inexpensive sorbent for copper, zinc and nickel ions as heavy metal.}, keywords = {Bentonite,Montmorillonite,Adsorption,Cation exchange,copper,Zinc,Nickel}, title_fa = {جذب یون های مس، روی و نیکل توسط بنتونیت کلسیمی}, abstract_fa = {رس‌ها و کانی‌ های رسی به ویژه مونتموریلونیت و بنتونیت در کنترل آلاینده ‌ها کاربرد گسترده ‌ای دارند. فلزهای سنگین از آلاینده ‌های مهم هستند. در این پژوهش جذب یون ‌های فلزهای سنگین مس، روی و نیکل توسط نمونه ‌های بنتونیت مورد بررسی و مطالعه قرار گرفت. نمونه 1 از معدن خیرآباد، نمونه 2 از معدن تنگ قوچان و نمونه 3 از معدنی در حوالی مسجد راوری تهیه و مورد بررسی قرار گرفتند و مشخص شد که این نمونه ‌ها از نوع کلسیمی می‌ باشند. ابتدا آزمایش ‌های جذب بر روی نمونه خیرآباد انجام شد. نتیجه ‌های به دست آمده نشان دادند که فرایند جذب بسیار تند بوده و همچنین کاهش pH باعث کاهش جذب یون‌های فلزهای سنگین مس، روی و نیکل می ‌شود. زمان مناسب برای تمامی آزمایش‌ها مدت 5 دقیقه به دست آمد. سرانجام شرایط مناسب جذب توسط این نمونه به دست آمد و در این شرایط دو نمونه دیگر مورد آزمایش قرارگرفتند. نتیجه ‌های به دست آمده نشان دادند که نمونه 2 بیشترین و نمونه 3 کمترین درصد جذب را در بین  این نمونه ‌ها دارند و افزایش  CEC نمونه ‌ها باعث افزایش جذب یون‌های مس، روی و نیکل می ‌شود و جذب نیکل توسط  این نمونه ‌ها از جذب مس و روی کمتر است و درمجموع  این نمونه‌ ها می ‌توانند جاذب عالی و ارزان برای یون‌های فلزهای سنگین مس، روی و نیکل باشند.  }, keywords_fa = {بنتونیت,مونتموریلونیت,جذب سطحی,تعویض کاتیونی,مس,روی,نیکل}, url = {https://www.nsmsi.ir/article_6233.html}, eprint = {https://www.nsmsi.ir/article_6233_629739d23dd8cc11d3268ef9b142b67b.pdf} } @article { author = {Pahlavanzadeh, Hasan and Zarenezhad Ashkzari, Hamid Reza}, title = {Defluoridation of Drinking Water with Fixed Bed Column Using Low Cost Natural Adsorbent, Bauxite}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {32}, number = {1}, pages = {17-24}, year = {2013}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {Fluoride is a constituent of natural water. Generally groundwater has been considered as a safe and protected source of drinking water in the rural and developing cities, and little consideration was given to the risks of chemical pollution, particularly to the presence of elevated levels of fluoride, arsenic and nitrate in groundwater. In this study, absorption method of continuous state is used for defluoridation with the bauxite as an absorbent and the graph of equilibrium concentration divided by initial concentration is plotted against the time. This graph helps us to find out the break through the time during the operation of continuous absorption and then optimal data is obtained. Absorption data correlated with Langmuir and Freundlich models but the data fits better to Langmuir’s.}, keywords = {fluoride,Water purification,Continuous adsorption,fixed bed column}, title_fa = {فلوراید زدایی از آب آشامیدنی با ستون جذب بستر ثابت با استفاده از جاذب ارزان قیمت بوکسیت}, abstract_fa = {فلوراید یک ماده معدنی اصلی در آب های طبیعی است که افزایش مقدار آن در آب نوعی آلودگی به شمار می ‌آید و به عوارض بسیاری برای سلامتی انسان منجر می ‌شود. در این پژوهش از فرایند جذب سطحی در حالت پیوسته با جاذب بوکسیت برای جداسازی فلوراید از آب استفاده شد و نمودار غلظت تعادلی نسبت به زمان رسم شد. با کاربرد این نمودار، زمان شکست در حالت پیوسته و داده ‌های بهینه جذب به دست آمد. نتیجه ‌ها، بیانگر جذب فلوراید با بوکسیت در حالت پیوسته از هر دو مدل لانگمویر و فرندلیچ می‌باشد. ولی با مدل لانگمویر دارای تطابق بیشتری است. نتیجه ‌های پژوهش ، بوکسیت را یک جاذب مؤثر فلوراید با قابلیت کارایی در صنایع گوناگون پیشنهاد می ‌دهد}, keywords_fa = {فلوراید,تصفیه آب,جذب سطحی پیوسته,ستون بستر ثابت}, url = {https://www.nsmsi.ir/article_6234.html}, eprint = {https://www.nsmsi.ir/article_6234_a116fb75b99f03c08fa5b21309a4c306.pdf} } @article { author = {Hassanzadeh, Parisa and Ganjidoust, Hossein and Ayati, Bita}, title = {Optimization of Oxy Tetracycline Aqueous Solutions Removal by Nano Zero Valent Iron in Oxidation and Photo-oxidation Processes}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {32}, number = {1}, pages = {25-34}, year = {2013}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {Antibiotic formulation waste water effluents are well known for their hard elimination by traditional bio-treatment methods and their important contribution to environmental pollution due to their fluctuating and recalcitrant nature. In the present study, interactions effect of oxy tetracycline (OTC) with Nano Zero Valent Iron (NZVI) modified by UV-A radiation were investigated using batch experiments with the parameters such as reactant concentration, pH, UV power, nano-iron concentration and time. In this process the UV power was 200 W and after six and half hours, 155 ppm OTC aqueous solutions by 1000 ppm nano-iron powder at pH of 3 were degraded. The removal efficiency of absorption (290 and 348 nm), TOC and COD were 87, 95, 85 and 89 percent, respectively. In the similar process there was no organic compound after 14 hours. The XRD analysis, has detected FeO and FeOOH, as the layer oxides that have formed on the surface of nano zero valent iron particles. The positive effects of this layer on the photocatalytic removal process were studied by blank experiments. The blank experiments were aerated by UV irradiation, and oxidized by iron nano particles in dark conditions that have been compared separately with the results of hybrid process (Iron nano particles in the presence of UV radiation). These experiments have shown superior results for OTC removal in hybrid process.}, keywords = {Oxyteracycline,Photoxidation,Nano zero valent iron,Maximum wavelength}, title_fa = {بهینه‌سازی پارامترهای مؤثر در فرایند تلفیقی اکسایش و اکسایش نوری برای حذف اکسی‌تتراسایکلین توسط نانو ذره های آهن}, abstract_fa = {با توجه به مشکل‌ساز بودن دفع مستقیم پساب دارای آنتی‌بیوتیک‌ها به محیط زیست و بروز مشکل‌ های جدی در محیط همانند مقاومت ژنتیکی، تصفیه پساب این صنایع از اهمیت ویژه ‌ای برخوردار است. در این پژوهش افزون بر بررسی تصفیه‌پذیری یکی از پرمصرف‌ترین آنتی‌بیوتیک‌ها، اکسی تتراسایکلین توسط نانو ذره ‌های آهن، قابلیت اکسایش و فتوکاتالیستی لایه آهن اکسید تشکیل شده بر سطح نانو ذره‌های آهن نیز بررسی شد. ابتدا پارامترهای مؤثر در حذف اکسی‌تتراسایکلین توسط فرایند تلفیقی اکسایش و اکسایش نوری بررسی و بهینه شدند که طبق نتیجه‌ های به دست آمده در شرایط بهینه، از نانو ذره‌ های آهن با غلظت mg/L 1000 برای حذف mg/L 155 اکسی‌تتراسایکلین در pH برابر 3، تابش UV با توان W 200 در مدت زمان 5/6 ساعت استفاده شد که مقدارهای حذف در طول موج‌های 290 و 348 نانومتر، TOC و COD به ترتیب 87، 95، 85 و 89 درصد به دست آمدند. پس از گذشت 14 ساعت، میزان همه این پارامترها بیانگر تجزیه کامل اکسی‌تتراسایکلین بود. همچنین طبقنتیجه آنالیز XRD ، FeO و FeOOH ، لایه اکسید تشکیل شده بر سطح نانو ذره‌ ها شناسایی شده و اثرهای مثبت فتوکاتالیستی آن در فرایند حذف توسط آزمایش‌های شاهد مورد بررسی قرار گرفت. بررسی اثر جداگانه هوادهی، پرتودهی فرابنفش و اکسایش توسط نانو ذره‌ه ای آهن در تاریکی و مقایسه نتیجه‌ ها با شرایط تلفیقی (نانو ذره‌های آهن در مجاورت تابش فرابنفش) نشان دهنده‌ی برتری فرایند تلفیقی در فرایند حذف بود.}, keywords_fa = {اکسی تتراسایکلین,اکسایش نوری,نانو ذره‌های آهن,طول موج بیشینه}, url = {https://www.nsmsi.ir/article_6754.html}, eprint = {https://www.nsmsi.ir/article_6754_af562c577861debe1716faa5fb4c739c.pdf} } @article { author = {Sadegi, Hosseini, Sayed Mohammad Sadeg and Sarrafi, Amir and Tahmooresi, Majid}, title = {Experimental Study of Ball Milling Effect on the Structureal Properties and Bleaching Performance of Bentonite}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {32}, number = {1}, pages = {35-45}, year = {2013}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In this study, effect of ball milling on the structural properties and bleaching performance of the Kerman bentonite sample was investigated.The bentonite sample consisted mainly of montmorillonite and small amount of impurities. The sample was ground with a high energy ball mill and characterized by X-Ray Diffraction (XRD), X-Ray Fluorescence (XRF), Fourier Transform Infra Red spectrometer (FT-IR) and Scanning Electron Microscopy (SEM). Also particle size distribution and specific surface area of the sample were obtained. The results showed that the crystalline form of the clay was changed by milling with high energy ball mill. With increasing of milling time more fractures and more disorder in structure of sample was happened. In addition, after ball milling the particle size of the bentonite was reduced even to nano metric scale but almost these very small particles re-aggregated. Due to reduction of particle size the specific surface area of the ground sample was increased. The oil bleaching experiment were carried out using the above ground bentonite and acid activated bentonite in a batch process and results showed that both modified bentonite have higher bleaching power. Therefore with bring together experimental conditions the ball milling method is suggested for preparation of bleaching earth.}, keywords = {Bentonite,Montmorillonite,High energy ball mill,Bleaching earth}, title_fa = {مطالعه آزمایشگاهی تأثیر آسیا کنی گلوله ای بر ساختار و قدرت رنگ بری بنتونیت برای تولید خاک رنگبر}, abstract_fa = {در این پژوهش تأثیر آسیا کنی گلوله‌ ای روی ساختار و قدرت رنگبری یک نمونه بنتونیت استان کرمان بررسی شد. نمونه بنتونیت به طور عمده شامل مونتموریلونیت و همچنین مقدار کمی ناخالصی بود. نمونه توسط یک آسیای گلوله ‌ای پر انرژی آسیا شد و ویژگی‌ های ساختاری آن به کمک روش های پراش پرتو ایکس، فلورسانس پرتو ایکس، طیف سنجی تبدیل فوریه فروسرخ و میکروسکوپ الکترونی به دست آمد. توزیع اندازه ذره و همچنین مساحت سطح ویژه نیز به دست آمد. نتیجه‌ ها نشان داد که بر اثر آسیا کنی گلوله ‌ای، نظم و شکل بلوری رس تغییر کرده است. با افزایش زمان آسیا ، شکستگی و بی نظمی های بیشتری در ساختار نمونه اتفاق افتاده است. افزون بر این، پس از آسیا کنی گلوله ای اندازه ذره ‌های بنتونیت حتی تا اندازه‌ های نانومتری نیز کم شده لیکن تا حدودی این ذره ‌های بسیار ریز به هم چسبیده و مجتمع شده‌ اند. بر اثر کاهش اندازه ذره ‌های بنتونیت، مساحت سطح ویژه آن نیز نسبت به حالت طبیعی افزایش یافته است. آزمایش رنگ بری روغن به وسیله بنتونیت آسیا شده و بنتونیت اسیدی شده در یک فرایند ناپیوسته انجام گرفت و نتیجه ‌ها نشان داد که هر دو نمونه اصلاح شده قدرت بالایی در رنگبری دارند. به همین دلیل با در نظر گرفتن شرایط آزمایشگاهی به کار رفته، روش آسیا کنی گلوله ای به منظور تولید خاک رنگبر پیشنهاد می شود.  }, keywords_fa = {بنتونیت,مونتموریلونیت,آسیای گلوله ای با انرژی زیاد,خاک رنگبر}, url = {https://www.nsmsi.ir/article_6755.html}, eprint = {https://www.nsmsi.ir/article_6755_f12e6b723ee2966dd4364ecf7a3051dd.pdf} } @article { author = {Tahouni, Nassim and Bagheri, Narges and Towfighi Darian, Jafar and Panjehshiah, Mohammad Hassan}, title = {Evaluation of Different Levels of Retrofit and Optimization of Cold-Section of BIPC Olefin Plant}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {32}, number = {1}, pages = {47-59}, year = {2013}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In this paper, retrofit and optimization of the cold-end section of 6th Olefin plant of BIPC is investigated. Having considered the importance of a simultaneous design through the elements (distillation columns, heat exchanger network and refrigeration cycles), three levels of modifications are suggested. The best operating column parameters along with available refrigeration cycles, a modification of refrigeration levels along with the same core process and heat exchanger network and finally a comprehensive and simultaneous retrofit scheme are evaluated for this case study. Having compared the results, one can conclude that simultaneous optimization of operating column parameters, refrigeration cycles and the associated heat exchanger network leads to higher efficiency showing 23.9% of energy saving with an investment payback of 3 months.}, keywords = {Retrofit,Olefin plant,Low-temperature distillation column,Refrigeration cycles,Energy saving}, title_fa = {بررسی سطح های گوناگون اصلاح و بهینه‌سازی بخش سرد واحد اولفین بندر امام خمینی}, abstract_fa = {در این پژوهش، قسمت سرد واحد اولفین ششم بندر امام خمینی مورد مطالعه قرار گرفته است. هدف، طراحی اصلاحی برج‌های تقطیر، شبکه مبدل گرمایی و سیکل ‌های سرماساز موجود در این قسمت است. با توجه به اهمیت در نظر گرفتن همزمان این سه قسمت هنگام طراحی و اصلاح برج‌های تقطیر زیر دمای محیط، سه سطح اصلاح پیشنهاد شده و مورد بررسی قرار گرفته ‌اند. در ابتدا هر قسمت به طور جداگانه و سرانجام هر سه قسمت به‌ طور همزمان مورد بررسی و اصلاح قرار گرفته است. نتیجه نشان می‌ دهد که در حالت اصلاح همزمان پارامترهای عملیاتی در برج‌های جداساز، سیکل‌های سرماساز و شبکه مبدل گرمایی وابسته، درصد صرفه‌ جویی سالانه هزینه انرژیمعادل 9/23 درصد با زمان بازگشت سرمایه معادل 3 ماه می‌ باشد.}, keywords_fa = {طراحی اصلاحی,واحد اولفین,برج تقطیر زیر دمای محیط,سیکل های سرماسازی,صرفه جویی انرژی}, url = {https://www.nsmsi.ir/article_6757.html}, eprint = {https://www.nsmsi.ir/article_6757_5f7f194e530ef4fc9d9f70d68da239e1.pdf} } @article { author = {Amani, Hossein}, title = {Pseudomonas aeruginosa NP2 as a Model for Rhamnolipid Production in Bioreactor Systems}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {32}, number = {1}, pages = {61-72}, year = {2013}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {Rhamnolipids are among the best known biosurfactants and have been proven to be very promising in enhanced oil recovery, cosmetics, food and pharmaceutics. In this research, rhamnolipid production by Pseudomonas aeruginosa NP2 in a bioreactor has been investigated. This study shows that the Pseudomonas aeruginosa NP2 is able to produce high quantities of rhamnolipid during 2.5 L batch bioreactor cultivations with sunflower oil as sole carbon source. The results showed that the maximum rhamnolipid concentration obtained was 13.5 g/L after 80 h of cultivation. The results also showed that the rhamnolipid production started at exponential growth phase and continued during the stationary phase. Two rhamnolipids, RL1 and RL3, produced by the microorganism, were confirmed by TLC and HPLC analysis. Finally, the produced rhamnolipid showed good surface activity because it is able to reduce the surface tension from 68 mN/m to 26 mN/m. Thus, Pseudomonas aeruginosa NP2 could be an appropriate model for rhamnolipid production in pilot plant bioreactor systems.  }, keywords = {Biosurfactant,Fermentation,Surface tension,Rhamnolipid,Pseudomonas aeruginosa}, title_fa = {بررسی تولید رامنولیپید درون راکتور زیستی به عنوان یک مدل توسط گونهPseudomonas aeruginosa NP2}, abstract_fa = {رامنولیپیدها در زمره‌ی بهترین بیوسورفکتنت‌های شناخته شده هستند که دارای کاربردهای مفیدی در ازدیاد برداشت نفت، صنایع دارویی، غذایی و آرایشی می‌ باشند. در این پژوهش، تولید رامنولیپید توسط گونه Pseudomonas aeruginosa NP2 درون یک راکتور زیستی بررسی می‌ شود. این مطالعه نشان می‌ دهد باکتری Pseudomonas aeruginosa NP2 می‌ تواند با روغن آفتاب گردان به عنوان تنها منبع کربنی، مقدار چشمگیری رامنولیپید در یک راکتور زیستی 5/2 لیتری تولید کند. نتیجه‌ های این پژوهش نشان داد، بیشترین میزان تولید رامنولیپید به  g/L5/13 پس از 80 ساعت کشت می‌ رسد. در این پژوهش همچنین دیده شد تولید رامنولیپید در فاز لگاریتمی رشد شروع و تا فاز سکون ادامه پیدا کرد. تولید دو نوع رامنولیپید، RL1 و RL3، توسط این میکروارگانیسم با HPLC و TLC مورد تأیید قرار گرفت. سرانجام رامنولیپید تولید شده توانست فعالیت سطحی خوبی از خود نشان دهد به ‌طوری که کشش سطحی را از mN/m 68 به mN/m 26 رساند.بنابراین، باکتری Pseudomonas aeruginosa NP2می‌ تواند یک مدل مناسب برای تولید رامنولیپید در راکتورهای زیستی نیمه صنعتی باشد.  }, keywords_fa = {بیوسورفکتنت,فرمانتاسیون,رامنولیپید,کشش سطحی,سودومناس آرجینوزا}, url = {https://www.nsmsi.ir/article_6758.html}, eprint = {https://www.nsmsi.ir/article_6758_bbaa2d53721bbe9a3652b35375cf3191.pdf} } @article { author = {Amani, Hossein}, title = {Production of Rhamnolipid Biosurfactants as Application for Enhanced Oil Recovery}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {32}, number = {1}, pages = {73-83}, year = {2013}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In this study, microbial enhanced oil recovery was investigated by rhamnolipid biosurfactants.  Surface tension reduction, the ability to emulsify oil, ecological acceptability, high biodegradability, stability at salinities and temperature are among the main characteristics of these biosurfactants. In this research, the ability of Pseudomonas aeruginosa NP2 to produce rhamnolipid was shown and the production of rhamnoilipd was confirmed by TLC and HPLC analysis. The rhamnolipid production started at exponential growth phase and continued during the stationary phase.During investigation of rhamnolipid production on sunflower oil as sole carbon, the results showed that the maximum rhamnolipid was reached about 0.8 g/L. Finally, the ability in recovering the oil was also demonstrated using the rhamnolipid at CMC concentration. For core flooding tests,first the brine (1% by weight) was injected at the rate of 10 mL/h until no more oil was produced in the effluent, theninjection of rhamnolipid instead of water was done. The recovery value of oil after water flooding was obtained 61.68 % of original oil in place, whereas nearly 68.56 % of original oil in place was recovered using rhamnolipd after water flooding or in other words about 6.76% enhanced oil recovery was obtained by rhamnolipid injection in core.  }, keywords = {Biosurfactant,Fermentation,Microbial enhanced oil recovery,Surface tension,Rhamnolipid}, title_fa = {تولید بیوسورفکتنت های رامنولیپید به منظور کاربرد در فرایند ازدیاد برداشت نفت}, abstract_fa = {در این پژوهش، بیوسورفکتنت‌های رامنولیپید به ‌عنوان عامل‌های ازدیاد برداشت میکروبی نفت مد نظر  قرار می ‌گیرد. از ویژگی ‌های مهم بیوسورفکتنت‌ها می ‌توان کاهش کشش سطحی، امولسیون کنندگی نفت، سازگاری با محیط، تجزیه پذیری، پایدار بودن در مقابل دما و شوری را نام برد. در این پژوهش تولید رامنولیپید از باکتریPseudomonas aeruginosa NP2 صورت گرفت و با توجه به شناسایی و اندازه گیری غلظت رامنولیپید توسط HPLC و TLC دیده شد تولید رامنولیپید در فاز لگاریتمی رشد شروع و تا فاز سکون ادامه می ‌یابد.در طی بررسی تولید رامنولیپید، مشخص شد که بیشترین میزان رامنولیپید تولید شده در محیط کشت دارای روغن آفتاب گردان به عنوان تنها منبع کربن برابر با 8/0 گرم بر لیتر است. سرانجام، آزمایش ‌های ازدیاد برداشت نفت با رامنولیپید تولید شده در غلظت CMCآنها انجام شد. آزمایش ‌های سیلاب‌زنی مغزه شامل سیلاب‌زنی مغزه اشباع از نفت خام با آب نمک 1% تا بازیافت نهایی و سپس تزریق محلول‌های  بیوسورفکتنت تا بازیافت نهایی انجام شد. برای این کار ، مغزه با شدت جریان 10 میلی لیتر بر ساعت، تا بازیافت نهایی،با آب سیلاب‌زنی شد. بازیافت نهایی سیلاب‌زنی با آب، 8/61% به ‌دست آمد. سپس سیلاب‌زنی با محلول بیوسورفکتنت انجام شد. در این آزمایش بازیافت نهایی سیلاب‌زنی با رامنولیپید، 56/68 % به ‌دست آمد یا به عبارت دیگر در نهایت  76/6 %  برای رامنولیپید ازدیاد برداشت نفت در مغزه به ‌دست آمد.}, keywords_fa = {بیوسورفکتنت,رامنولیپید,فرمانتاسیون,کشش سطحی,ازدیاد برداشت میکروبی نفت}, url = {https://www.nsmsi.ir/article_6787.html}, eprint = {https://www.nsmsi.ir/article_6787_ab0921ff150a271beb59dfc7e3f5bfbd.pdf} } @article { author = {Ahmady-Asbchin, Salman and Pourbabaee, Ahmad Ali and Andrès, Yves}, title = {Biosurfactant, Fermentation, Microbial enhanced oil recovery, Surface tension, Rhamnolipid}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {32}, number = {1}, pages = {85-91}, year = {2013}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In this study, microbial enhanced oil recovery was investigated by rhamnolipid biosurfactants.  Surface tension reduction, the ability to emulsify oil, ecological acceptability, high biodegradability, stability at salinities and temperature are among the main characteristics of these biosurfactants. In this research, the ability of Pseudomonas aeruginosa NP2 to produce rhamnolipid was shown and the production of rhamnoilipd was confirmed by TLC and HPLC analysis. The rhamnolipid production started at exponential growth phase and continued during the stationary phase.During investigation of rhamnolipid production on sunflower oil as sole carbon, the results showed that the maximum rhamnolipid was reached about 0.8 g/L. Finally, the ability in recovering the oil was also demonstrated using the rhamnolipid at CMC concentration. For core flooding tests,first the brine (1% by weight) was injected at the rate of 10 mL/h until no more oil was produced in the effluent, theninjection of rhamnolipid instead of water was done. The recovery value of oil after water flooding was obtained 61.68 % of original oil in place, whereas nearly 68.56 % of original oil in place was recovered using rhamnolipd after water flooding or in other words about 6.76% enhanced oil recovery was obtained by rhamnolipid injection in core.  }, keywords = {Production of Rhamnolipid Biosurfactants as Application for Enhanced Oil Recovery}, title_fa = {بررسی فرایند جذب زیستی همزمان دو فلز روی/ نیکل به وسیله جلبک قهوه ای فوکوس سراتوس}, abstract_fa = {فلزهای سمی و سنگین در شکل‌های فیزیکی و شیمیایی گوناگون به عنوان آلوده کننده محیط زیست محسوب می‌ شوند. امروزه از روش‌های فیزیکی، شیمیایی و زیستی متنوعی برای حذف این آلاینده‌ ها از محیط زیست استفاده می‌ شود. در این پژوهش، جذب زیستی یون‌های نیکل و روی به وسیله جلبک قهوه‌ای فوکوس سراتوس در راکتور بسته مورد بررسی قرار گرفت. آزمایش‌ ها با استفاده از دستگاه طیف‌سنجی فروسرخ (FT-IR) نشان داد که، گروه ‌های کربوکسیل سطحی آلژینات، نقش کلیدی را د رجذب یون نیکل و روی دیواره جلبک برعهده دارند. به‌کارگیری معادله لانگمویر برای محاسبه میزان جذب یون‌ها به وسیله جلبک اثبات کرد که بیشترین میزان جذب نیکل و روی به‌ترتیب 71/0  و 95/0 میلی مول بر گرم می ‌باشد و زمان 340 دقیقه به عنوان زمان تعادل در مطالعه سینتیک جذب یون ها در آب مقطر و معمولی به دست آمد.}, keywords_fa = {روی,نیکل,جلبک,جذب زیستی,راکتور زیستی}, url = {https://www.nsmsi.ir/article_6788.html}, eprint = {https://www.nsmsi.ir/article_6788_a8dde1f0538e00efd4cc6b96d7e46aae.pdf} } @article { author = {Meshkini, Mohammad and Irannajad, Mehdi and Azadmehr, Amirreza and Samiee Bayragh, Abdoulah}, title = {Investigation of the Zinc Extraction Possibility from Low Grade Oxide Minerals Using Heterotrophic Bacteria Pseudomonas Aeruginosa and Adaptation of Bacteria to High Concentrations of Zinc Ion}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {32}, number = {1}, pages = {93-100}, year = {2013}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {Nowadays, due to the exhaustion of high-grade mining resources and environmental considerations, the processing of mining wastes or low-grade ores to extract metals values using microorganisms has been attracted attention in industry. In this study, the ability of Pseudomonas aeruginosa (ATTC 9027) bacteria to leach zinc from low-grade zinc oxide ores of Zanjan Angoran mine has been investigated. In culture media contains glucose, this bacteria produces organic acids which dissolve zinc from its ore. Ore sample contains 14% zinc that occurred in Smithsonite (ZnCO3) mineral. Pseudomonas aeruginosa bacteria have been inoculated in culture media that contained glucose then optimum conditions have been determined. The solid/liquid ratio1/100, glucose in culture media 6% and leaching time 5 days were optimum condition and effective parameters on ore sample bioleaching and 41% of zinc content has been dissolved in these conditions. After this step using sequential cultivation technique bacteria was adapted to high concentrations of zinc ion present in this environment and the final test using adapted bacteria and in offer mentioned optimum conditions was performed and the zinc extraction was reached to 62%. Conditions have been controlled by pH measurement and zinc extraction determination at the same intervals.  }, keywords = {Bioleaching,Smithsonite,Pseudomonas aeruginosa,Bacteria adaptation}, title_fa = {بررسی امکان استخراج روی از کانی‌های کم عیار اکسیدی با استفاده از باکتری هتروتروف Pseudomonas aeruginosa و تطبیق باکتری به غلظت بالای یون روی}, abstract_fa = {به دلیل رو به پایان بودن منابع پرعیار معدنی و ملاحظه‌های زیست محیطی، امروزه استخراج فلزهای با ارزش از باطله‌های معدنی و کانی‌های کم عیار با استفاده از میکروارگانیسم‌ها مورد توجه قرار گرفته است. در این پژوهش، قابلیت باکتری Pseudomonas aeruginosa(ATCC 9027) برای استخراج فلز روی از باطله‌های اکسیدی کم عیار معدن سرب و روی انگوران زنجان بررسی شده است. این باکتری در محیط کشت دارای گلوکز، اسید های آلی تولید می‌کند که باعث انحلال فلز روی از کانی آن می‌شود. ماده معدنی دارای 14% فلز روی است که به صورت کانی اسمیت زونیت )3(ZnCO می‌باشد. باکتری Pseudomonas aeruginosa در محیط کشت دارای گلوکز رشد داده شد و سپس شرایط بهینه آزمایش بیولیچینگ تعیین شد. نسبت جامد به مایع :100،گلوکز در محیط کشت 6% و مدت زمان 5 روز از شرایط بهینه و پارامترهای مؤثر بر بیولیچینگ ماده معدنی بود.41% فلز روی موجود در نمونه ماده معدنی در این شرایط به حالت محلول در آمد. پس از این مرحله با استفاده از روش کشت‌های متوالی، باکتری به غلظت بالای روی موجود در محیط تطبیق داده شد و آزمایش نهایی با استفاده از باکتری تطبیق یافته به یون روی و در شرایط بهینه تعیین شده از مرحله پیش انجام شد و درصد استخراج روی به 62% رسید. با اندازه گیری pH محیط و تعیین درصد روی استخراج شده در دوره‌های زمانی برابر، شرایط آزمایش‌ها کنترل شد.}, keywords_fa = {بیولیچینگ,اسمیت زونیت,سدوموناس آئروجینوسا,تطبیق باکتری}, url = {https://www.nsmsi.ir/article_6789.html}, eprint = {https://www.nsmsi.ir/article_6789_c1a8f7e7c4aedc10ad0bc61a6bdc2558.pdf} }