@article { author = {Bahrami Adeh, Narmin and Mohtadi Haghighi, Mitra and Mohammad Hosseini, Nahid and Papan, Azadeh and Khoramjah, Fatemeh and Khani, Hadi}, title = {The Investigation of Influence of Mineral Fillers on Mechanical and Viscosity of Modified Sulfur}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {33}, number = {2}, pages = {1-10}, year = {2014}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {The use of sulfur widely recommended in the construction industry due to its low price and having specific characteristics such as adhesion and anti-corrosion properties. However, medication of chemical and mechanical characteristics of sulfur by reaction with modifiers and mixing with mineral powders is necessary. In this research, modified sulfur was prepared by reaction of molten sulfur with olefinic additive. Then it was mixed with various amounts of silica, mica and talc fillers to make composite samples. These samples were then tested for tensile, flexural and compressive strength. The test results show that the maximum flexural and compressive strength of the composite samples obtained with 10% talc and highest tensile strength obtained with samples containing 12% mica. Furthermore, addition of silica powder caused a significant increase in the viscosity of the modified sulfur.}, keywords = {Sulfur,Modified sulfur,inorganic fillers,Mechanical properties,Mica,silica,Talc}, title_fa = {بررسی تأثیر پرکننده‌های معدنی بر ویژگی های مکانیکی و گرانروی گوگرد اصلاح شده}, abstract_fa = {استفاده از پودر گوگرد به دلیل قیمت پایین و دارا بودن ویژگی‌های خاصی از جمله خاصیت چسبانندگی و ضد خوردگی، به طور گسترده‌ا ی در صنایع ساختمانی توصیه شده است اما اصلاح گوگرد و بهبود ویژگی‌ های شیمیایی و مکانیکی آن از روش واکنش با اصلاح کننده‌ ها و اختلاط با پودرهای معدنی ضرورت دارد.در این پژوهش ابتدا، گوگرد اصلاح شده از واکنش گوگرد مذاب با افزودنی اولفینی تهیه شد. سپس از اختلاط آن با درصدهای گوناگون از پرکننده (فیلر) های سیلیس، میکا و تالک، نمونه ‌های چندسازه (کامپوزیت) ساخته شد. نمونه‌ ها تحت آزمون‌ های مکانیکی کششی، خمشی و فشاری قرار گرفتند. بررسی نتیجه‌ های آزمون‌ ها نشان داد بیشترین مقاومت خمشی و فشاری با نمونه ‌های چندسازه دارای 10 درصد تالک و مقاومت کششی با نمونه‌ه ای دارای 12درصد میکا ایجاد می‌ شود. همچنین مشخص شد افزودن پودر سیلیس باعث افزایش چشمگیر گرانروی گوگرد اصلاح شده می‌ شود.}, keywords_fa = {گوگرد,گوگرد اصلاح شده,پرکننده (فیلر) معدنی,ویژگی‌های مکانیکی,میکا,سیلیس,تالک}, url = {https://www.nsmsi.ir/article_11537.html}, eprint = {https://www.nsmsi.ir/article_11537_33a771c0984749e40b1ec7044b2f6595.pdf} }