@article { author = {Rahimi, Mahmood Reza and Karimi, Hajir and Zarghami Dehghani, Zahra}, title = {Comparison of Performance of Three Kinds Rotating Distributors in Bubbling Fluidized Bed}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {33}, number = {2}, pages = {55-62}, year = {2014}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In the present study, a bubbling fluidized bed was constructed. Three kinds of rotating distributors with hexagonal, blade, and swirling configurations of holes have been studied. The analysis of the experimental data showed that rotational speed and input air velocity are the key parameters that influence the fluidization quality and its minimum velocity. Through the comparison of different configurations of rotating distributors in bubbling fluidized bed, it was observed that the blade configuration of holes has the best operation in terms of fluidization quality.}, keywords = {Distributor,Bubbling fluidized bed,Minimum fluidization velocity,Pressure drop}, title_fa = {مقایسه عملکرد سه نوع توزیع کننده چرخان گوناگون در بستر سیال حبابی}, abstract_fa = {در این پژوهش، با ساخت دستگاه بستر سیال حبابی، سه نوع توزیع‌ کننده چرخان با آرایش‌ سوراخ‌ها به شکل شش ضلعی، پره‌ای، حلزونی بررسی شده‌ اند. تحلیل داده‌های تجربی به دست آمده از عملکرد سه نوع توزیع‌ کننده نشان داد که سرعت چرخش و نرخ هوای ورودی از پارامترهای مؤثر بر کیفیت شناورسازی و کمینه سرعت آن می‌ باشند. تجزیه و تحلیل انجام شده در این مقاله در قالب نتیجه‌ های جدیدی ارایه شده است. مقایسه سه نوع توزیع‌کننده چرخان در بستر سیال نشان داد که توزیع‌کننده نوع پره ‌ای بهترین عملکرد را از جهت کیفیت شناورسازی دارد}, keywords_fa = {توزیع کننده,بسترسیال حبابی,کمینه سرعت شناورسازی,افت فشار}, url = {https://www.nsmsi.ir/article_11548.html}, eprint = {https://www.nsmsi.ir/article_11548_f742645428775f25056b9073cded3070.pdf} }