@article { author = {Khademinejad, Taha and Rahimzadeh, Hassan}, title = {Analysis of First and Second Thermodynamic Laws for Water Desalination System Based on Humidification-Dehumidification Process for Closed-Air Open-Water Cycle}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {34}, number = {1}, pages = {69-76}, year = {2015}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {The humidification-dehumidification desalination system is a carrier-gas-based thermal desalination technique which is ideal for small-scale water production purposes. This technique has attracted many attentions in previous years due to low fossil energy demand and its low integration costs. In this paper, the water desalination system based on humidification-dehumidification process in closed-air open-water cycle is investigated thermodynamically by the commercial software EES.  Furthermore, the effects of the governing parameters such as humidifier and dehumidifier effectiveness ( and ), temperature of the inlet water into the humidifier and dehumidifier ( and ) and mass rate ratio () are investigated  to maximize the performance of the system which is presented by Gained Output Ratio (GOR) and minimize the non-dimension entropy generation rate (). Form thermodynamic analysis of the system we can conclude that the efficiency of the whole system is more affected by efficiency of the dehumidifier rather than the efficiency of the humidifier. Moreover, in low mass rate ratio,GOR increase for lower inlet water temperatures of dehumidifier. On the other hand, in high mass rate ratio, higher temperatures of inlet dehumidifier water will lead to higher performance (GOR) of the system.}, keywords = {thermodynamic analysis,Humidification-Dehumidification,Close air-open water cycle,Water desalination,Engineering Equation Solver (EES)}, title_fa = {تحلیل قانون های اول و دوم ترمودینامیک برای سامانه شیرین سازی آب به روش رطوبت زنی و رطوبت زدایی براساس سیکل بسته هوا ـ باز آب}, abstract_fa = {روش رطوبت زنی و رطوبت زدایی از جمله روش ‌های ارزان تولید آب در مقیاس کوچک می ‌باشد که در سالیان اخیر با توجه به پیش بینی ‌های نگران کننده در رابطه با منابع رو به پایان سوخت‌ های فسیلی، توجه ویژه ‌ای را به خود جلب کرده است. در این مقاله روش رطوبت زنی و رطوبت زدایی بر اساس سیکل بسته هوا ـ باز آب به وسیله نرم افزار تجاری EES مورد بررسی ترمودینامیکی (قوانین اول و دوم) قرار گرفت. در ادامه تاثیر پارامترهای حاکم بر مسئله مانند ظریب ‌های اثر بخشی محفظه های رطوبت زنی () و رطوبت زدایی ()،دمای آب ورودی به محفظه رطوبت‌زنی () و دمای آب ورودی به محفظه رطوبت زدایی ()، نسبت شدت جریان جرمی () بر نسبت خروجی سامانه () و نرخ تولید آنتروپی بی بعد شده ( ) بررسی شد. از شبیه سازی های ترمودینامیکی این نتیجه به دست آمد که بازده محفظه رطوبت زدایی به شدت بر بازده کل سامانه اثرگذار بوده و اثر آن به مراتب بیشتر از بازده محفظه رطوبت ‌زنی می‌ باشد. افزون بر این، در نسبت شدت جریان‌ های پایین، نسبت خروجی به ازای دماهای پایین تر آب ورودی به محفظه رطوبت زدایی افزایش پیدا می ‌کند. این در حالی است که در نسبت شدت جریان‌ های جرمی بالا بر خلاف نسبت شدت جریان‌ های جرمی پایین، دماهای بالاتر آب ورودی به محفظه رطوبت زدایی منجر به نسبت خروجی بیشتری می شوند.}, keywords_fa = {تحلیل ترمودینامیکی,روش رطوبت‌زنی و رطوبت زدایی,سیکل بسته هوا ـ باز آب,نمک‌زدایی آب,نرم افزار EES}, url = {https://www.nsmsi.ir/article_14499.html}, eprint = {https://www.nsmsi.ir/article_14499_db9434d7223e019302a0d7c80e5047aa.pdf} }