@article { author = {Babaee, Saeed}, title = {Grading Effect of Ammonium Perchlorate on Mechanical Properties of Propellant Based on Glycidyl Azide Polymer}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {36}, number = {3}, pages = {143-149}, year = {2017}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {Composite solid propellant containing aluminum (Al), ammonium perchlorate (AP) particles and glycidyl azide polymer (GAP) are used in various missiles and rockets as high energy propellants. Selections of particles size and grading type in the propellant formulations, with a change in the viscosity and rheological properties of the propeller slurry, have a great effect on the mechanical and ballistic properties of the final product. In this paper in addition to introducing various classes of propellants with different grading, several samples of Al-AP/GAP propellants were prepared and along with their properties comparing, the propellant with the optimum class was presented. The results showed that the best mechanical properties belonged to a propellant containing three different grading of AP (20, 100 and 250 microns). Mechanical properties of this sample under optimal conditions was obtained of yang modulus 4.16 megapascal (MPa), yield stress 0.49 MPa, yield strain 12 %, stress at failure 0.2 MPa, strain at failure 20 %, toughness 28.8 kJ/m3 and hardness 64 Shore A.}, keywords = {Composite solid propellant,Ammonium perchlorate,Glycidyl azide polymer,grading,Mechanical properties}, title_fa = {تأثیر دانه‌بندی آمونیوم پرکلرات بر ویژگی‌های مکانیکی پیشرانه‌ بر پایه رزین گلسیدیل آزید پلیمر}, abstract_fa = {پیشرانه‌های جامد مرکب دارای ذره ­های آلومینیوم (Al)، ‏آمونیوم پرکلرات (AP)‏ و رزین‏ گلسیدیل آزید پلیمر (GAP) به‌عنوان پیشرانه‌های پرانرژی در انواعگوناگون ‏موشک‌ها و راکت‌ها‎‎ به ­کار می‌روند.‏ انتخاب اندازه ذره ­ها و نوع دانه‌بندی در فرمولاسیون پیشرانه‌ها، با تغییر در گرانروی و ویژگی­ های رئولوژیکی خمیر پیشران،بر ویژگی­ های مکانیکی و عملکردی فراورده­ی پایانی تأثیر به ­سزایی دارد. در این مقاله افزون بر معرفی کلاس‌های گوناگون پیشرانه با دانه‌بندی‌های گوناگون، نمونه‌های پیشرانه جامد مرکب Al-AP/GAP تهیه و ضمن مقایسه ویژگی­ های آن‌ها، پیشرانه با کلاس بهینه معرفی شد. نتیجه­ ها نشان داد که بهترین ویژگی مکانیکی مربوط به پیشرانه دارای سه نوع دانه‌بندی گوناگون از AP (۲۰، 100 و ۲۵۰ میکرون) بوده است. ویژگی­ های مکانیکی این نمونهدر شرایط بهینه با مدول یانگ ۴/۱۶ مگاپاسکال (MP)، تنش تسلیم MP 49/0، کرنش تسلیم 12%، تنش در شکست MP۰/۲، کرنش در شکست ۲۰%، چقرمگی 3kJ/m 8/28 و سختی Shore A 64 به­ دست آمد. }, keywords_fa = {پیشرانه جامد مرکب,‏آمونیوم پرکلرات,گلسیدیل آزید پلیمر,دانه‌بندی,ویژگی های مکانیکی}, url = {https://www.nsmsi.ir/article_25224.html}, eprint = {https://www.nsmsi.ir/article_25224_8103c1290a4250e79878030f20e5280e.pdf} }