@article { author = {Alaie, Mahshad and Soleimani, Mohammad and Raeiat Dost, Saeideh and Kian, Fatemeh and Rashidi, Alimorad}, title = {Synthesis and Investigation of Carbon and Silica Nanostructures Operation in Improvement of Drilling Fluids Lubricity and Extreme Pressure Properties}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {36}, number = {4}, pages = {161-170}, year = {2017}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In this research, carbon nanostructures including Graphene oxide (Go) and Multi-Walled Carbon NanoTubes (MWCNTs) and silica nanostructures including silica aerogel and spherical nano silica were prepared for improvement of the tribological properties of drilling fluids. For this purpose, Go, MWCNTs, spherical nano silica, and silica aerogel were synthesized with modified Hummer's method, Chemical Vapor Deposition (CVD) and a sol-gel method respectively. MWCNTs were functionalized with Nitric acid. The as-prepared nanostructures were characterized with X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The as-prepared nanomaterials were added to the lubricating oil with using the appropriate surfactant. The nano lubricant additives were added to the drilling fluid. Tan the effect of these nanostructures addition on friction and film strength of drilling fluids was investigated with the EP/Lubricity Tester machine. Results showed that morphology has high influence in tribology properties. Results showed that graphene oxide is preferred to the others for improving the drilling fluids tribological properties.}, keywords = {DDrilling fluids,Nano lubricating additives,Carbon nanotubes,Graphene oxide,Spherical silica,Silica aerogel}, title_fa = {سنتز و بررسی عملکرد برخی از نانوساختارهای کربنی و سیلیسی در بهبود ویژگی های روان‌سازی و فشار پذیری سیال های حفاری}, abstract_fa = {هدف از انجام این پژوهش، سنتز برخی از نانوساختارهای کربنی و سیلیسی با ریخت شناسی های گوناگون و استفاده از آن ­ها برای تهیه نانو افزایه روان ­سازی گل حفاری است. با ارزیابی ویژگی­ های روان­سازی و فشار پذیری گل حفاری تهیه شده با هریک از نانوافزایه های ساخته شده، تأثیر ساختار شیمیایی و ریخت شناسی مورد بررسی قرارگرفته و بهترین نانوساختار با ویژگی­های بهینه انتخاب شد. به این منظور، گرافن اکسید به روش اصلاح شده هامر، نانولوله­ های کربنی چند دیواره به روش رسوب دهی شیمیایی فاز بخار، نانوذره سیلیکای کروی و نانوسیلیکا آئروژل به روش سل ـ ژل سنتز شدند. عامل دار نمودن نانولوله­ های کربنی چند دیواره توسط نیتریک اسید انجام شد. برای تعیین ویژگی­ های نانوساختارهای مورد نظر از الگوی پراش اشعه ایکس، میکروسکوپ الکترونی روبشی و میکروسکوپ الکترونی عبوری استفاده شد. نانومواد با استفاده از سورفکتانت مناسب به روغن روان ­ساز و پس از آن به سیال حفاری پایه آبی افزوده شد و تأثیر افزایش نانومواد مورد نظر بر کاهش اصطکاک و افزایش مقاومت پوسته سیال حفاری با استفاده از دستگاه اندازه ­گیر روان ­سازی/ فشارپذیری بررسی شد. نتیجه­ های به دست آمده نشان دادند که ریخت شناسی و ساختار شیمیایی تأثیر زیادی بر ویژگی­ های تریبولوژی داشته و از بین نانوساختارهای مورد نظر، گرافن اکسید برترین ویژگی ­ها را در بهبود ویژگی ­های روان­سازی و فشار پذیری سیال حفاری نشان داده است.}, keywords_fa = {سیال های حفاری,نانوافزودنی های روان‌ساز,نانولوله های کربنی,گرافن اکسید,نانوسیلیکای کروی,سیلیکا آئروژل}, url = {https://www.nsmsi.ir/article_26001.html}, eprint = {https://www.nsmsi.ir/article_26001_9c195bf0cdf1443275676684cf60a9cb.pdf} }