@article { author = {Mashhadi, Somaye and Mardani Tudeshki, Hosein and Alimoradi, Mohammad}, title = {Determination of Copper Ions in Arak Water Using Electro-Spun Nano Fiber Impregnated with Ligand Adsorbent}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {36}, number = {3}, pages = {103-113}, year = {2017}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In this work, the Nanofibers were synthesized using electrospun of polystyrene solution in DMF/ THF solvent. The important parameters such as voltage, the distance between injector and collector, speed injection, the concentration of polystyrene and speed rotation of collectors in electrospun technique were optimized. Results showed that, within certain limits, by increasing the voltage, high Electro distance, low injection rate and high speed of the collector, we will get the Nanofibers with diameters less and regular chain structure. In optimal conditions, the average of polystyrene fibers diameter was 70-102 nm. Polystyrene absorbent modified by dithizone. By selecting the best conditions, the modified polystyrene Nanofibers were produced with an average diameter of 73-126 nm. The synthesized polystyrene Nanofibers were used for preconcentration of Copper in wastewater samples. The effective parameter on extraction such as adsorbent amount, pH, type and volume of eluent solvent and salt amount was evaluated and optimized with “one at the time” method. According to the results, optimum conditions are the solid phase: 0/006 gr, pH = 7, eluent solvent: acetonitrile solution with a volume of 0/7 mL, 1/3 g amount of potassium nitrate salt. This method was applied to real samples and good results were obtained. High enrichment factors and very good detection limit are highlights of this method.}, keywords = {Electro-Span,Nanofibers,Polystyrene,Modifier,copper,Solid phase extraction}, title_fa = {استفاده از نانو الیاف پلیمری الکتروریسی آغشته به لیگاند جاذب برای تعیین مس در آب شهرستان اراک}, abstract_fa = {در این پژوهش، نانوالیاف با استفاده از الکتروریسی محلول پلی استایرن در حلال DMF / THF تولید شد. پارامترهای مهم مانند ولتاژ، فاصله بین تزریق و جمع کننده، سرعت تزریق، غلظت پلی استایرن و سرعت چرخش جمع کننده در روش الکتروریسی بهینه سازی شد. نتیجه ­ها نشان داد که در بازه ­ی معین، با افزایش ولتاژ، فاصله الکتروریسی زیاد، شدت جریان تزریق پایین و سرعت بالای جمع کننده، نانو الیافی دارای ساختار زنجیری منظم و قطر کم­تر به دست می ­آید. در شرایط بهینه، الیاف پلی استایرنی دارای قطر میانگین nm 102-70 بودند. جاذب پلی استایرن با دی تیزون اصلاح شد. با انتخاب بهترین شرایط، نانو الیاف پلی استایرن اصلاح شده با قطر میانگین nm 126-73 تولید شد. نانوالیاف پلی استایرنی تولید شده، برای پیش تغلیظ مس در نمونه پساب مورد استفاده قرار گرفت. پارامترهای اثرگذار در استخراج همانند مقدار جاذب، pH، نوع و حجم حلال شوینده و مقدار نمک، به روش تک متغیره بررسی و بهینه شد. با توجه به نتیجه ­ها، شرایط بهینه عبارتند از: مقدار فاز جامد:g 006/0، 7pH=، حلال شوینده: محلول استونیتریل با حجمmL 7/0، نمک پتاسیم نیترات g3/1. این روش روی نمونه­ های حقیقی استفاده شد و نتیجه­های خوبی به دست آمد. فاکتور تغلیظ بالا و حد تشخیص خیلی خوب این روش از جمله نکته ­های برجسته آن می باشد.}, keywords_fa = {الکتروریسی,نانو الیاف,پلی استایرن,اصلاحگر,مس,استخراج فاز جامد}, url = {https://www.nsmsi.ir/article_27260.html}, eprint = {https://www.nsmsi.ir/article_27260_24fd66a1ddd7d8e38b5c65f3f34d9feb.pdf} }