@article { author = {Hosseini-Zavvarmahalleh, Sayed Reza and Ghasemi-mir, Shahram and Poursadegh-limuee, Shiva}, title = {Preparation of Cobalt Oxide Nanofibers by Electrospinning and Their Application for Electro-Catalysis of Ethylene Glycol Oxidation}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {38}, number = {3}, pages = {11-21}, year = {2019}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In this work, cobalt acetate/polyvinyl alcohol (Co (OAc)2/PVA) nanofibers were prepared by the electrospinning method. In the following, cobalt oxide nanofibers (CoxOy NFs) were obtained by appropriate thermal treatment. The surface morphology and diameter of the synthesized nanofibers were investigated by Scanning Electron Microscopy (SEM). The results showed that long fibers with an average diameter of around 50 nm were obtained for CoxOy NFs. By ThermoGravimetric Analysis (TGA), the appropriate temperature for calcination was obtained at about 600 °C. The Fourier Transform-InfraRed (FT-IR) spectroscopy showed that all the organic constituents of the electrospun nanofibers were removed after calcination. For the investigation of the crystallinity of the metal oxide nanofibers, X-Ray Diffraction (XRD) was used. The crystalline phase of CoxOy nanofibers was determined as cubic. By using adsorption-desorption isotherms, the surface area of the nanofibers was obtained at about 4.4 m2/g The electrochemical behavior of CoxOy NFs modified carbon paste electrode (CoxOy/CPE) was studied by cyclic voltammetry, electrochemical impedance spectroscopy, and chronoamperometry methods. The electrocatalytic activity of the modified electrode was studied towards oxidation of ethylene glycol (EG) in an alkaline medium. The obtained results showed that the CoxOy NFs/CPE has electrocatalytic ability towards the EG oxidation.}, keywords = {Electrospinning,Nanofibers,Electrocatalytic oxidation,Cobalt oxide,ethylene glycol}, title_fa = {تهیه نانوالیاف کبالت اکسید به روش الکتروریسی و به کارگیری آن‌ها برای الکتروکاتالیز اکسایش اتیلن گلیکول}, abstract_fa = {در این کار، نانوالیاف کبالت استات/پلی وینیل الکل/PVA) 2(Co(OAc) به روش الکتروریسی تهیه شدند. در ادامه، با تیمار دمایی مناسب، نانوالیاف کبالت اکسید (CoxOy NFs) به ­دست آمدند. ریخت‌شناسی سطح و قطر نانوالیاف تهیه شده به­وسیله میکروسکوپ الکترون روبشی (SEM) مورد بررسی قرار گرفت. نتیجه­ ها SEM نشان داد که الیاف طویل با قطر متوسط در حدود nm 50 برای CoxOyNFs به­دست آمدند. با استفاده از تجزیه وزن‌سنجی گرمایی (TGA)، دمای مناسب برای تکلیس در حدود C˚ 600 به ­دست آمد. طیف‌بینی‌ فروسرخز تبدیل فوریه (FT-IR) نشان داد که همه اجزای آلی نانوالیاف الکتروریسی‌شده پس از تکلیس، خارج شدند. برای بررسی ساختار بلوری نانوالیاف اکسید فلزی از پراش پرتو ایکس (XRD) استفاده شد. فاز بلوری CoxOyNFs، مکعبی تعیین شد. با استفاده از هم‌دماهای جذب ـ واجذب نیتروژن، مساحت سطح نانوالیاف  g/2m4/4 به ­دست آمد. رفتار الکتروشیمیایی الکترود خمیرکربن اصلاح شده با CoxOyNFs (CoxOy/CPE) به­وسیله روش‌های ولتامتری چرخه‌ای، طیف‌بینی امپدانس الکتروشیمیایی و کرونوآمپرومتری مورد مطالعه قرار گرفت. فعالیت الکتروکاتالیستی الکترود اصلاح شده نسبت به اکسایش اتیلن گلیکول (EG) در محیط قلیایی مورد مطالعه قرار گرفت. نتیجه­های به دست آمده نشان داد کهCoxOyNFs/CPE قابلیت الکتروکاتالیز اکسایشEG را دارد.}, keywords_fa = {الکتروریسی,نانوالیاف,اکسایش الکتروکاتالیزی,کبالت اکسید,اتیلن گلیکول}, url = {https://www.nsmsi.ir/article_31725.html}, eprint = {https://www.nsmsi.ir/article_31725_2b2279de30c82c0bd1784766ecf8532b.pdf} }