@article { author = {Dianat, Somayeh and Dianat, Seddigheh}, title = {Synthesis, Characterization, and Application of TiO2/MMT for Removal of Pb2+ from Industrial Wastewater}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {40}, number = {2}, pages = {115-128}, year = {2021}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {The release of heavy metals into the environment due to industrialization and urbanization has caused major problems throughout the world. Increasing the pollution of the environment by heavy metals due to carcinogenicity and biological accumulation has caused serious concerns. Therefore, the adsorption of heavy metals from industrial wastewater is one of the important environmental issues. Lead is one of the four metals that have the most effect on human health. So far, different methods have been considered for adsorbing lead. The use of biocompatible adsorbents is one of these methods. Montmorillonite (MMT), a clay mineral with unique physical and chemical properties are considered a biocompatible adsorbent. In this study, after modification of the surface of the MMT by titanium dioxide was characterized by FT-IR, XRD, FE-SEM, and BET techniques. Then the activity of the MMT nano-adsorption immobilized on the surface of titanium dioxide (TiO2/MMT) was investigated for the removal of lead (II) ion and different factors such as contact time, adsorbent dosage, lead (II) ion concentration, and pH were optimized. The efficiency of this nano-adsorbent is such that even in the presence 10 mg can eliminate a significant amount of lead ion (II) (50 ppm) with a yield of about 90% at neutral pH over a short period of time (5 minutes). Moreover, the experimental results showed that the adsorption capacity of Pb2+ ion by TiO2/MMT decreased by only about 8-10 % after performing 12 runs of the adsorption process.}, keywords = {Nano-adsorbent,Montmorillonite,TiO2,Lead (II) ion removal,Atomic absorption spectroscopy}, title_fa = {سنتز، شناسایی و کاربرد مونت موریلونیت اصلاح شده با تیتانیم دی اکسید در حذف یون سرب (II) از پساب صنعتی}, abstract_fa = {انتشار فلزات سنگین در محیط زیست به سبب صنعتی شـدن و گـسترش شـهرنـشینی، مـشکلات بزرگی در سراسر جهان به همراه داشته است و به دلیل خصوصیات سرطان زایی و تجمـع بیولوژیکی آن ها سبب نگرانی های بسیار جدی شده است. بنابراین جذب فلزات سنگین از پساب های صنعتی یکی از مباحث مهم زیست محیطی محسوب می شود. سرب یکی از چهار فلزی است که بیشترین عوارض را بر روی سلامتی انسان دارد. تاکنون روش های مختلفی برای جذب سرب مورد توجه قرارگرفته است کـه اسـتفاده از جـاذب های زیست سازگار از جمله این روش ها به شمار می رود. مونت موریلونیت (MMT) که یک کانی رسی با خواص فیزیکی و شیمیایی منحصر به فرد است از جمله جاذب های زیست سازگار محسوب می شود. در این مطالعه پس از اصلاح سطح مونت موریلونیت توسط تیتانیم دی اکسید (TiO2/MMT) توسط روش های FT-IR، XRD، FE-SEM و BET شناسایی شد و سپس کاربرد آن را به عنوان نانوجاذب برای حذف یون سرب (II) تحت شرایط مختلف (مدت زمان تماس، مقدار نانوجاذب، غلظت محلول یون سرب (II) و pH) مورد بررسی قرار گرفت. نتایج به دست آمده نشان داد که کارایی این نانوجاذب به حدی است که حتی با مقدار10 میلی گرم طی 5 دقیقه در pH خنثی قادر است مقدار قابل ملاحظه ای از یون سرب (II) با غلظت 50 میلی گرم بر لیتر را با بازده حدود 90 درصد حذف نماید. علاوه بر این، نتایج آزمایشگاهی نشان داد که ظرفیت جذب یون سرب (II) توسط نانوجاذب اصلاح شده بعد از انجام 12بار فرآیند جذب، تنها در حدود 8 الی 10 درصد افت می کند.}, keywords_fa = {نانوجاذب,مونت موریلونیت,تیتانیم دی اکسید,حذف یون سرب (II),طیف سنجی جذب اتمی}, url = {https://www.nsmsi.ir/article_36997.html}, eprint = {https://www.nsmsi.ir/article_36997_0dc53961b5948f53cf7ce948ed9aa251.pdf} }