@article { author = {Sobhanian, Samad}, title = {Design and Manufacturing of a Plasma Torch for Deposition of Alumina Using Plasma Spray Method}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {39}, number = {1}, pages = {141-147}, year = {2020}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {Nowadays the production of metallic and dielectric layers has found numerous applications, an effective way for the deposition of refractory material like aluminum oxide, titanium oxide, and silicon oxide is the use of hot plasma jet. We try in this paper, after a short description of the designed plasma torch to present the preliminary results obtained by its application in alumina deposition using oxygen and nitrogen as the working gases. Surface morphology studies and also XRD patterns both confirm the formation of alumina thin films in micro and nanoscales. In this article, the characteristics of gamma-alumina nanopowder coating on two types of stainless steel and Pyrex glass substrates by plasma spray method are investigated. Morphological characteristics and phase changes of alumina deposited on two different types of substrates are studied by investigating the scanning electron microscope patterns and also X-ray diffraction spectrum. The results show that the phase of alumina is changed from gamma to alpha due to the high temperature of the plasma torch. Also, the amount of particles deposition on the steel substrate is more than the glass case.}, keywords = {Plasma torch,Alumina,Film deposition}, title_fa = {طراحی و ساخت مشعل پلاسمایی برای لایه نشانی آلومینا به روش اسپری پلاسمایی}, abstract_fa = {امروزه لایه نشانی مواد رسانا و دی الکتریک برای تغییر و بهبود سطح کاربردهای زیادی پیدا کرده است. یکی از روش­ های رایج برای لایه نشانی مواد دیرگداز مانند اکسیدهای آلومینیم، تیتانیوم و سیلیس استفاده از جت پلاسمای تولید شده در مشعل پلاسما می ­باشد. در این پژوهش پس از شرح مختصر در مورد ویژگی­ های مشعل پلاسمای طراحی و ساخته شده نتیجه ­های اولیه کارکرد آن در لایه نشانی آلومینا با استفاده از گازهای کاری نیتروژن و اکسیژن ارایه می­ شود. بررسی ریخت شناسی سطح­ های  لایه نشانی شده توسط میکروسکپ الکترونی جاروبی و همچنین طیف­ های پراش پرتو ایکس نمونه ها تشکیل لایه های آلومینا در اندازه های میکرو و نانو را تأیید می کنند. ویژگی های لایه نشانی نانو پودر آلومینای گاما بر روی دو نوع زیر لایه از جنس فولاد ضد زنگ و شیشه پیرکس به روش اسپری پلاسمایی مورد بررسی قرار گرفت. ویژگی های ریخت شناسی و تغییرهای فازی آلومینا بر روی دو جنس متفاوت زیر لایه با بررسی شکل های میکروسکوپ الکترونی جاروبی و همچنین طیفف های پراش پرتو ایکس مورد مطالعه قرار گرفت. نتیجهه ها نشان می دهند، آلومینای گاما در اثر گرما مشعل پلاسمایی به نوع آلفا تغییر فاز داده است. همچنین میزان نشست ذره ها در زیر لایه فولاد بیش تر از مورد پیرکس می باشد.}, keywords_fa = {مشعل پلاسمایی,لایه نشانی,آلومینا}, url = {https://www.nsmsi.ir/article_44715.html}, eprint = {https://www.nsmsi.ir/article_44715_ac36d85a6411837eb355c1db5049712c.pdf} }