@article { author = {Rahimi, Mahmood Reza}, title = {Study of Mixing of Phases inside the Sieve Tray Using Computational Fluid Dynamics}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {31}, number = {1}, pages = {101-113}, year = {2012}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In the present study a three-dimensional Eulerian-Eulerian Computational Fluid Dynamics (CFD) model was developed to predict the hydrodynamics behavior of industrial scale sieve trays, for study of phase mixing inside the tray. The dispersed gas and the continuous liquid phases are as two interpenetrating phases. Three parameters consisting distribution of density of mixture, volume fraction distribution and interfacial area density were evaluated as characteristics of mixing. Four regions consisting near wall region, the area between adjacent holes, behind the entrance and exit weirs are distinguished as regions with poor mixing. Plug flow with almost uniform phase mixing was seen at central region of tray. The extent of mixing is depended on the gas and liquid flow rates, and the response of central region and above mentioned 4 poor mixing areas to change of gas and liquid flow rates are different. The results showed that proposed model can well predict some details of phase mixing characteristics, while known methods have not ability to show them.}, keywords = {CFD,Sieve tray,Hydrodynamics,Phase mixing}, title_fa = {مطالعه اختلاط فازها در سینی غربالی با استفاده از دینامیک سیالات محاسباتی}, abstract_fa = {دراین پژوهش، یک مدل دینامیک سیالات محاسباتی ((CFD سه بعدی دو سیالی در چارچوب اولری- اولری برای شبیه سازی هیدرودینامیک جریان‌ها روی سینی غربالی در مقیاس صنعتی به منظور مطالعه اختلاط فازها توسعه داده شده است. فازگازگسسته و فاز مایع پیوسته به عنوان دو فاز با اثرهای متقابل در نظر گرفته شده اند. برای بررسی وضعیت اختلاط فازها، سه پارامتر توزیع جزء حجمی، توزیع دانسیته مخلوط و سطح تماس فازهای گاز ـ مایع در مکان‌های گوناگون سینی بررسی شده اند. در چهار ناحیه شامل پشت بند خروجی، در نزدیکی ورودی مایع به سینی، کنار دیواره برج و در فاصله بین سوراخ‌های مجاور وضعیت اختلاط نامناسب دیده شد. در ناحیه مرکزی سینی جریان به تقریب قالبی با توزیع به نسبت یکنواخت اختلاط فازها دیده شد. میزان اختلاط بستگی به شدت جریان گاز و مایع دارد و پاسخ ناحیه مرکزی و چهار ناحیه مشخص شده با اختلاط غیر یکنواخت به تغییر شدت جریان مایع و گاز متفاوت است. این مدل امکان دیدن جزئیاتی را فراهم نموده است که تاکنون مطالعه‌ های موجود قادر به ارایه آنها نبوده اند.}, keywords_fa = {دینامیک سیالات محاسباتی,سینی غربالی,هیدرودینامیک,اختلاط فازها}, url = {https://www.nsmsi.ir/article_7178.html}, eprint = {https://www.nsmsi.ir/article_7178_c39df0f0acbf881331e1e6633ef4ce57.pdf} }