@article { author = {Zolghadri, Majid}, title = {Evaluation of Reflux Classifier Operation in Size Classification in the Cut Size of 45 Microns}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {30}, number = {3}, pages = {15-23}, year = {2011}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In unit operation processes; the control of feed size entering to equipments is essential in the optimization of overall operation performance which is usually accomplished by classifiers. In commercial scale unites, a considerable amount of classifier feed bypasses to the underflow non-selectively; especially in the cut sizes less than 45microns. This leads to deteriorate the process performance of the unite operation plant. In the present research, operation of a reflux classifier in the cut size of about 45microns was evaluated. The imperfection coefficient of classification in the all experiments were about 0.3 or less and the bypass of particles finer than 25 microns to underflow was between 8 to 13% which indicates a high performance of the reflux classifier in the size separation having cut size of 45 microns. It was found that fluidization water flow rate has a significant effect to bypass of particles; but excess of fluidization water flow rate caused mixing and in the vertical section that deranges sedimentation procedure leading to non-selective transport of fine particles to underflow. In order to evaluate mixing phenomenon in the vicinity of underflow valve, a Mixing Index was defined. If the defined index equals to unit, indicates to a non-mixing in the region of underflow. The higher index value than unite, indicates to more intense mixing in the vicinity of underflow valve resulting in disordering sedimentation of particles.}, keywords = {Fluidized bed separator,Reflux classifier,Size separation,Mixing,sedimentation}, title_fa = {ارزیابی عملکرد کلاسیفایر برگشتی در طبقه‌بندی ابعادی با حد جداسازی 45میکرون}, abstract_fa = {در عملیات واحد، کنترل ابعاد بار ورودی به دستگاه‌ها برای بهینه کردن عملکرد کل فرایند عملیات واحد ضروری است و این کار به طور معمول با کلاسیفایرها انجام می‌ شود. اما زیاد بودن انتقال غیر انتخابی ذره‌ها به جریان ته‌ریز در حد‌ جداسازی ریزتر از 45 میکرون، کارایی فرایند عملیات واحد را کاهش می‌ دهد. در پژوهش حاضر عملکرد کلاسیفایر برگشتی در حد جداسازی‌های حدود 45 میکرون مورد ارزیابی قرار گرفت. ضریب نقص در تمامی آزمایش‌ها حدود 3/0 و یا کمتر بود؛ همچنین درصد انتقال مواد ریزتر از 25 میکرون به ته‌ریز، بین 8 تا13درصد می‌ باشد. که این امر نشان‌دهنده کارایی خوب کلاسیفایر برگشتی در طبقه‌بندی ابعادی با حد جداسازی 45 میکرون بود. همچنین مشخص شد که شدت جریان آب شناوری تا مادامی که از حد بحرانی فراتر نرود، تأثیر به ‌سزایی بر کاهش انتقال غیر انتخابی ذره ‌ها به ته‌ریز دارد. چراکه بیشتر بودن شدت جریان آب از حد بحرانی موجب افزایش اختلاط در بخش قائم کلاسیفایر برگشتی و مختل شدن روند ته‌نشینی مواد در مجاورت مجرای ته‌ریز می‌‌شود که این امر افزایش غیر انتخابی انتقال ذره‌ های ریز به ته‌ریز را به دنبال خواهد داشت. به منظور ارزیابی میزان اختلاط در مجاورت مجرای ته‌ریز، شاخصی با عنوان "شاخص اختلاط" تعریف شد. اگر این شاخص برابر با 1 باشد در مجاورت ته‌ریز اختلاط رخ نمی ‌دهد و روند ته‌نشینی ذره‌های درشت مناسب است و هرچه این شاخص بزرگتر باشد، اختلاط بیشتر در ناحیه نزدیک به ته‌ریز رخ می‌دهد که این امر روند ته‌نشینی ذره‌ها را مختل می‌کند.}, keywords_fa = {جداکننده بستر سیال,کلاسیفایر برگشتی,جداسازی ابعادی,اختلاط,ته‌نشینی}, url = {https://www.nsmsi.ir/article_7485.html}, eprint = {https://www.nsmsi.ir/article_7485_962753293edd6491067899cfb0a894a3.pdf} }