@article { author = {Vaferi, Behzad and Karami, Hamid Reza and Karami, Hamid Reza}, title = {Modeling of Natural Gas Steam Reforming Process in a Pd/Ag Membrane Reactor for Pure Hydrogen Production}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {30}, number = {3}, pages = {25-37}, year = {2011}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {Fuel cells will be one of the most important resources of energy in the future They use pure hydrogen, and natural gas as a feed. Converting chemical energy to electrical energy in fuel cells is a direct process without any environmental pollution. Thus the study and modeling of various hydrogen production and purification processes is necessary. Up to day, natural gas steam reforming is one of the most important chemical processes for hydrogen production. It should be mentioned that hydrogen is obtained from a produced synthesis gas (product of methane steam reforming process). A lot of researches have also done work on a direct production of pure hydrogen using various membranes. Previous studies have shown that using Pd-Ag membrane is only permeable for hydrogen is the best choice for pure hydrogen production. Thus, in the present study the modeling of natural gas steam reforming in the Pd-Ag membrane reactor has been done. Effect of some variables such as pressure, temperature, steam to methane ratio in the feed, membrane thickness and flow pattern of reactants and sweep gas on the methane conversion, hydrogen production and produced hydrogen-to-carbon monoxide ratio have been investigated and optimum operating conditions have been determined qualitatively. The proposed model has been evaluated by some data that obtained from an experimental study. The results of the proposed model have a good consistency with the results of experimental study.}, keywords = {Methane Steam Reforming,Pd-Ag membrane reactor,optimum operation conditions}, title_fa = {مدل‌سازی فرایند ریفرمینگ گاز‌طبیعی با بخار آب در راکتور غشایی پالادیم ـ نقره برای تولید هیدروژن خالص}, abstract_fa = {پیل‌های سوختی یکی از مهمترین مبدل‌های انرژی در آینده می‌باشند که از هیدروژن خالص، متانول و گاز طبیعی به عنوان خوراک استفاده می‌کنند. تبدیل انرژی شیمیایی به انرژی الکتریسیته در پیل‌های سوختی فرایندی مستقیم است که بدون ایجاد آلودگی‎های زیست‌محیطی و صوتی انجام می‌شود. از این‌رو مطالعه‌ و مدل‌سازی راه‌های مختلف تولید و خالص‌سازی هیدروژن ضروری به نظر می‌رسد. یکی از مهمترین فرایند‌های شیمیایی موجود برای تولید هیدروژن، تبدیل گاز طبیعی با بخار آب است. شایان گفتن است که هیدروژن از جداسازی گاز سنتز (مخلوط هیدروژن و کربن مونواکسید) به عنوان فراوده‌ی واحد تبدیل با بخار آب به دست می‌آید.پژوهش‌های گسترده‌ای نیز بر روی راه‌های تولید مستقیم هیدروژن خالص با استفاده از غشاهای گوناگون انجام شده‌است. مطالعات گذشته نشان داده‌است که استفاده از غشای پالادیم ـ نقره که فقط نسبت به هیدروژن عبورپذیر است، بهترین گزینه برای تولید هیدروژن خالص خواهد بود. بر همین اساس در این مقاله، مدل‌ سازی فرایند تبدیل گاز طبیعی با بخار آب در راکتور غشایی پالادیم ـ  نقره انجام شده است. اثر متغیرهای گوناگونی مانند فشار و دمای محیط واکنش، نسبت متان به بخار‌ آب در خوراک ورودی، ضخامت غشاء و نوع جریان واکنشگر‌ها و گاز جاروب‌کننده (همسو و ناهمسو) بر‌روی میزان تبدیل متان، تولید هیدروژن و نسبت هیدروژن به کربن مونواکسید‌ تولیدی بررسی و شرایط بهینه‌ی عملیاتی به  ‌صورت کیفی تعیین شده‌است. مدل پیشنهادی با استفاده از داده‌های آزمایشگاهی موجود در مراجع مورد ارزیابی قرار گرفته‌است. این ارزیابی نشان می‌ دهد که نتیجه‌ های مدل ارایه ‌شده به‌خوبی بر نتیجه‌ های آزمایشگاهی منطبق است.}, keywords_fa = {ریفرمینگ گاز طبیعی با بخار آب,راکتور غشایی پالادیم ـ نقره,شرایط بهینه‌ی عملیاتی}, url = {https://www.nsmsi.ir/article_7486.html}, eprint = {https://www.nsmsi.ir/article_7486_ccabf2cecfa6addbf8b32779f8112f77.pdf} }