@article { author = {Jafari Nejad, Shahryar and Abolghasemi, Hossein and Ahmadi, Seyed Javad and Ghorbanian, Sohrabali}, title = {Mechanical Properties of PP/Clay Nanocomposiets Prepared by Melt Blending}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {30}, number = {2}, pages = {61-67}, year = {2011}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {Mechanical properties are important parameters in preparation of nanocomposites. Analyzing the trends on mechanical properties gives information about the effect of compatibilizing agent , nanoclays , and processing method. MA and GMA  have higher compatibilizing effect than AA because of their different polarity promoting a better mechanical performance specially in Young,s modulus and impact strength and tensile strength and produce a less drastic reduction of the deformation properties. addition of clay to pp improves the tensile modulus and tensile strength, but reduces the elongation at break, regardless of the coupling agent used. In pp/clay, nanocomposites prepared with cloisite 15A and PP-g-MA, tensile strength is decreased , while Young,s modulus is increased.The solvent resistant  of these nanocomposites decreased, when clay loading increased.  In pp/clay nanocomposites prepared with oligomerically modifiedclay, this clay has plasticising effect on the polymers that the tensile strength is slightly decreased compared with the virgin polymers, while Young,s modulus is slightly increased.It is worth nothing that the elongation at break for most nanocomposites does not drop as severely as usually seen with the typical organically modified clay.}, keywords = {Nanocomposite,Melt blending,Compatibilizing agent,Nanoclay,Oligomer}, title_fa = {ویژگی های مکانیکی نانوکامپوزیت های پلی پروپیلن ـ خاک رس تهیه شده با روش مخلوط مذاب}, abstract_fa = {ویژگی‌های مکانیکی از پارامترهای مهم در تهیه نانوکامپوزیت‌ها می ‌باشند. بررسی ویژگی‌های مکانیکی اطلاعات مفیدی در مورد اثر سازگارکننده ها و نانوکلی و روش فرایندی می ‌دهد. در این کار پژوهشی، خواص مکانیکی نانوکامپوزیت‌های تهیه شده با خاک رس C15A و اولیگومر pp-g-MA با خواص مکانیکی نانوکامپوزیت‌های تهیه شده توسط دیگر پژوهشگران مقایسه  شده است. به ‌طورکلی مالئیک انیدرید (MA) وگلیسیدیل متاکریلات (GMA) اثرسازگار کنندگی بهتری نسبت به اکریلیک اسید(AA) دارند زیرا به خاطر قطبیتشان، ویژگی‌های مکانیکی نانوکامپوزیت‌ها به ‌ویژه مدول یانگ و مقاومت ضربه‌ای و مقاومت کششی را بهبود می‌ بخشند اگرچه در ویژگی‌های انعطافی کاهش شدیدی نشان می‌ دهند. افزایش خاک رس به پلی پروپیلن مدول کششی و مقاومت کششی را بهبود داده اما ازدیاد طول در نقطه شکست را با صرف ‌نظر از عامل کوپلینگ به کار رفتهکاهش می دهد. نانوکامپوزیت‌های حاوی خاک رسC20A مدول و مقاومت کششی بالاتری نسبت به C30B وCNa+ دارند در نانوکامپوزیت‌های پلی پروپیلن ـ خاک رس تهیه شده با خاک رساصلاح شده اولیگومری، این خاک اثر شکل پذیری( انعطافی) روی پلیمرها دارد که مقاومت کششی در مقایسه با پلیمرهای اولیه کم می ‌شود، در حالی که مدول یانگ افزایش می ‌یابد. ساختار نانوکامپوزیت‌های تهیه شده با خاک رس C15A و اولیگومر PP-g-MA ، اینترکلیت است که در آنها مقاومت کششی کاهش یافته ولی مدول یانگ افزایش می‌ یابد. دراین نانوکامپوزیت‌ها مقاومت به جذب حلال با افزایش میزان خاک رس، کاهش می‌ یابد.}, keywords_fa = {نانوکامپوزیت پلی پروپیلن,‌ اختلاط مذابی,سازگارکننده,نانو رس,عامل کوپلنیگ,اولیگومر}, url = {https://www.nsmsi.ir/article_7520.html}, eprint = {https://www.nsmsi.ir/article_7520_b635ec586b7fa9810a952d4798f6db20.pdf} }