Simulation of Thermal Management of Phase Change Materials Nano Composites Using CFD Technic

Document Type : Research Article

Authors

1 Department of Chemical Engineering, Faculty of Engineering, University of Mohaghegh Ardabili, Ardabil, I.R. IRAN

2 Department of Chemical Engineering, Faculty of Chemical Engineering, Oil and Gas Engineering, Shiraz University, Shiraz, I.R. IRAN

3 Department of Applied Chemistry, Ahar Branch, Islamic Azad University, Ahar, I.R. IRAN

Abstract

The energy crisis in recent years has to lead us to think about new sources of energy. Phase change materials are one of these efficient sources. They can be used as thermal insulators besides their heat storage applications. Also, implementing these materials has erased our need for immunization of energy consumption systems. Despite all the benefits, phase change materials have some limitations such as leaking problems and low thermal conductivity coefficient. Nanoparticles are therefore can improve their properties. In this study, the melting process of paraffin wax comprising nanoparticles of Al2O3, Fe2O3, SiO2 and ZnO (with weight fraction percentage 2% and 8%) in a rectangular container is simulated by Comsol software. Influence of nanoparticles with different weight fractions on temperature, velocity distribution, density, thermal conductivity coefficient and liquefy process are subsequently investigated. The results presented a 12.5% increase in the thermal conductivity coefficient by adding 8wt% nanoparticles. The rate of melting process in 8wt% nanoparticles is bigger than that of 2wt% nanoparticles and pure paraffin with similar initial and boundary conditions for all states, which indicates that adding nanoparticles to paraffin for increasing the melting rate can be useful in various thermal management purposes such as storing energy.

Keywords

Main Subjects


[1] باباپور، عزیز؛ بخشوده­نیا، یاسر؛ بخشوده­نیا، محمد؛ "مروری بر مدلسازی عددی و آنالیز کاربرد مواد تغییرفازدهنده در ساختمان جهت کاهش مصرف انرژیپنجمین کنفرانس انرژی­های تجدیدپذیر، پاک و کارآمد، اسفند (1392).
[2] ضامن، محمد؛ رضاخانی، ناصر؛ رجبی، مهدیه؛ زینالی دانالو، میرعلی اصغر؛ ارزیابی عملکرد سامانه ترکیبی آب گرم‌کن/ آب شیرین‌کن خورشیدی خانگی، نشریه شیمی و مهندسی شیمی ایران، (3)34: 91 تا 102 (1394).
[3] باباپور،عزیز؛ مسعودی ریحان، مهدیه؛ "مروری بر مواد تغییر فاز دهنده به عنوان منبع ارزشمند انرژی"، پنجمین کنفرانس انرژی­های تجدید­پذیر، پاک و کارآمد، اسفند (1392).
[5] Pielichowska K., Pielichowski K., Phase Change Materials for Thermal Energy StorageProg. Mater. Sci., 65: 67–123 (2014).
[6] Babapoor A., Azizi M.M., Karimi G., Thermal Management of a Li-Ion Battery Using Carbon Fiber-PCM CompositesAppl. Therm. Eng., 82: 281–290 (2015).
[7] Samimi F., Babapoor A., Azizi M.M., Karimi G., Thermal Management Analysis of a Li-Ion Battery Cell Using Phase Change Material Loaded with Carbon FibersEnergy96: 355-371 (2016).
[8] Babapoor A., Karimi G., Khorram M., Fabrication and Characterization of Nanofiber-Nanoparticle-Composites with Phase Change Materials by ElectrospinningAppl. Therm. Eng 99: 1225-1235 (2016).
[9] Babapoor A., Karimi G., Sabbaghi S., Thermal Characteristic of Nanocomposite Phase Change Materials During Solidification Process, J. Energy Storage7:74-81 (2016).
[10] Karimi G., Azizi M.M., Babapoor A., Experimental Study of a Cylindrical Lithium Ion Battery Thermal Management Using Phase Change Material CompositesJ. Energy Storage8:168-174 (2016).
[11] Babapoor A., Karimi G., Golestaneh S.I., Ahmadi Mezjin M., Coaxial Electro-Spun PEG/PA6 Composite Fibers: Fabrication and CharacterizationAppl. Therm. Eng., 118: 398-407 (2017).
[13] Wang J., Xie H., Guo Z., Li Y., Improved Thermal Properties of Paraffin Wax by the Addition of TiO2 Nanoparticles, Appl. Therm. Eng., 73: 1541-1547 (2014).
[14] Ho C.J., Gao J.Y., Preparation and Thermophysical Properties of Nanoparticle in Paraffin Emulsion as Phase Change MaterialInt. Commun. Heat Mass Transfer, 36: 467-470 (2009).
[15] Valan Arasu A., Mujumdar A.S., Numerical Study on Melting of Paraffin Wax with Al2O3 in a Square EnclosureInt. Commun. Heat Mass Transfer, 39: 8–16 (2012).
[16] کریمی، هجیر؛ سبزه میدانی، محمدمهدی؛ مطالعه عددی تأثیر عامل‌های هندسی بر انتقال گرمای نانوسیال آب ـ Al2O3 در یک میکروکانال، نشریه شیمی و مهندسی شیمی ایران، (4)35: 137 تا 150 (1395).
[17] Kaplan F., Vivero C.D., Howes S., Arora M., Homayoun H., Burleson W., Tullsen D., Coskun A.K., “Modeling and Analysis of Phase Change Materials for Efficient Thermal Management”, University Boston, (2014).
[18] Pryor R.W., “Modeling Materials through a Phase Transition: Using COMSOL Multiphysics and Applying Physics First Principles Techniques”, Excerpt from the Proceedings of the COMSOL Conference,Boston (2007).