@article { author = {Hosseini, Seyed Hamid and Izadpanah, Amir Abbas and Rahideh, Hosein}, title = {Thermodynamic Modeling of Carbon Dioxide Solubility in Aqueous Methyl Di Ethanolamine Using Cubic Plus Association Equation of State (CPA)}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {34}, number = {4}, pages = {45-57}, year = {2016}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In this work, Vapor-Liquid Equilibrium (VLE) of the 3-component system composed of carbon dioxide (1), water (2), and methyl diethanolamine (3) has been modeled by the cubic plus association equation of state in a wide range of temperatures (313 –433 K), pressures (0.775 –4,930 kPa), and methyl diethanolamine wt% (5 –75). The 3-component system composed of carbon dioxide, water, and methyl diethanolamine was modeled by two different approaches. In the first approach, binary interaction coefficient between carbon dioxide and methyl diethanolamine was set equal to zero and energy and volume of association between carbon dioxide and methyl diethanolamine were optimized. In the second approach, the average energy of association between carbon dioxide and methyl diethanolamine at different temperature and amine wt% that was obtained in the first approach was used and volume of association and binary interaction between carbon dioxide and methyl diethanolamine were optimized. In both approaches, carbon dioxide has been considered as two association schemes: 1) as an association molecule with 3B and 4C association schemes, 2) as a non-association molecule. The results obtained in this work showed a good compatibility with the experimental data for this 3-component system. Comparison the results between this work and the Clegg-Pitzer and N-Wilson-NRF models reveals that the cubic plus association model leads to more convincing results than both of them. Furthermore, results obtained from the 4C association scheme for carbon dioxide in the cubic plus association equation of state shows a lesser error compared to 3B association scheme and to non-association scheme.}, keywords = {molybdenum,Molybdenite concentrate,Electro oxidation,energy consumption,electrolysis}, title_fa = {مدل سازی ترمودینامیکی حلالیت کربن دی اکسید در محلول آبی متیل دی اتانول آمین با استفاده از معادله حالت مکعبی به اضافه تجمعی (CPA)}, abstract_fa = {در این کار، تعادل بخار مایع (VLE) سامانه سه تایی کربن دی اکسید (1)- آب(2)- متیل دی اتانول آمین(3) در بازه‌ ی گسترده دما (K 433-313) ، فشار (kPa 4930-775/0) و درصد وزنی متیل دی اتانول آمین (75-5) با استفاده از معادله‌ ی حالت مکعبی به اضافه تجمعی (CPA) مدل‌ سازی شد. مدل سازی سامانه سه تایی کربن دی اکسید ـ آب ـ متیل دی اتانول آمین با دو روش متفاوت صورت پذیرفت. روش اول: بهینه سازی پارامترهای انرژی و حجم تجمعی با فرض این که مقدار پارامتر برهم‌کنش دوتایی (kij) بین کربن دی اکسید و متیل دی اتانول آمین برابر با صفر ‌باشد. روش دوم: متوسط گیری از مقدارهای انرژی تجمعی به دست آمده در دماهای گوناگون و در درصدهای وزنی متفاوت متیل دی اتانول آمین و استفاده از آن برای بهینه سازی پارامتر حجم تجمعی و نیز پارامتر برهم‌کنش دوتایی بین کربن دی اکسید و متیل دی اتانول آمین. در هر دو روش کربن دی اکسید با دو حالت گوناگون در نظر گرفته شد: 1) به عنوان یک مولکول تجمعی با طرح تجمعی 4C و 3B .  2) به عنوان یک مولکول غیرتجمعی. نتیجه ‌های به ‌دست آمده در این کار هم‌خوانی خوبی با داده ‌های آزمایشگاهی برای سامانه سه تایی دارد. مقایسه‌ ی نتیجه‌ های به دست آمده از مدل Clegg-Pitzer و مدل N-Wilson-NRF نشان می‌ دهد که نتیجه‌ های به دست آمده از مدل CPA نسبت به هر دو مدل رضایت بخش ‌تر است. هم چنین نتیجه‌ های به دست آمده از به کار بردن طرح تجمعی 4C برای کربن دی اکسید در معادله حالت CPA خطای کمتری را نسبت به طرح تجمعی 3B و بدون طرح تجمعی برای کربن دی ‌اکسید، نشان می‌ دهد.}, keywords_fa = {molybdenum,Molybdenite concentrate,Electro oxidation,energy consumption,electrolysis}, url = {https://www.nsmsi.ir/article_19876.html}, eprint = {https://www.nsmsi.ir/article_19876_a584f63837cea53edd2ade6db97245e9.pdf} }