@article { author = {Mahmoodi, Marzieh and Ashrafizadeh, Seyed Nezamoldin}, title = {Investigation on Electro oxidation of Molybdenite Concentrate and Reduction in Energy Consumption}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {34}, number = {4}, pages = {69-76}, year = {2016}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In this research, dissolution of molybdenite through electro-oxidation of molybdenite concentrate in alkaline electrolyte solution was investigated. Effect of various parameters, including operating potential, liquid to solid ratio, NaCl concentration and distance between electrodes on the dissolution of molybdenite and the consumed electric energy within the electrochemical cell was studied. The results show that, dissolution of molybdenite was increased by increasing operating potential, liquid to solid ratio and NaCl concentration. The same was increased by increasing the distance between electrodes up to 10 mm, while for further distances the latter decreased. The energy consumption increased by increasing operating potential, liquid to solid ratio, and the distance between electrodes. The consumed energy also decreased by increasing NaCl concentration up to 100 g/L, while for further salt concentrations the latter increased. At optimum conditions including operating potential of 3 V, liquid to solid ratio of 200 mL/g, NaCl concentration of 100 g/L, distance between electrodes of 10 mm, and a period of 4 hours operation, the efficiency of molybdenum recovery and energy consumption were 70.41% and 5.56 kWh, respectively, per kilogram of molybdenite concentrate.}, keywords = {molybdenum,Molybdenite concentrate,Electro oxidation,Consumed energy,electrolysis}, title_fa = {بررسی الکترواکسیداسیون کنسانتره مولیبدنیت و بهینه سازی مصرف انرژی فرایند}, abstract_fa = {در این پژوهش، میزان انحلال مولیبدنیت و انرژی مصرفی به وسیله فرایند الکترواکسیداسیون کنسانتره مولیبدنیت در الکترولیت قلیایی بررسی شده و اثر پارامترهای گوناگون شامل پتانسیل الکتریکی، نسبت مایع به جامد، غلظت نمک سدیم کلرید، و فاصله بین الکترودها بر میزان انحلال مولیبدنیت و انرژی مصرفی در سل الکتروشیمیایی مورد بررسی قرار گرفته است. نتیجه‌ ها نشان می‌ دهد که میزان انحلال مولیبدنیت با افزایش پتانسیل الکتریکی، نسبت مایع به جامد و غلظت نمک سدیم کلرید افزایش می‌ یابد. همچنین با افزایش فاصله بین الکترودها تا mm 10، میزان انحلال مولیبدنیت افزایش و برای مقدارهای بیش از آن کاهش می ‌یابد. میزان مصرف انرژی با افزایش پتانسیل الکتریکی، نسبت مایع به جامد و فاصله بین الکترودها افزایش می ‌یابد و با افزایش غلظت نمک سدیم کلرید تا g/L 100 کاهش یافته و برای مقدارهای بیش ‌تر از آن افزایش می‌یابد.در شرایط بهینه (پتانسیل الکتریکی برابر با V 3، فاصله بین الکترودها mm 10، نسبت مایع به جامد mL/g 200 و غلظت نمک سدیم کلرید برابر با g/L100 و مدت زمان 4 ساعت) میزان انحلال مولیبدنیت و میزان انرژی مصرفی به ازای هر کیلوگرم مولیبدن انحلال یافته، به ترتیب معادل 41/70% و kWh 56/5 تعیین شد}, keywords_fa = {مولیبدن,کنسانتره مولیبدنیت,الکترواکسیداسیون,انرژی مصرفی,الکترولیز‌}, url = {https://www.nsmsi.ir/article_19878.html}, eprint = {https://www.nsmsi.ir/article_19878_998083715d378c109ffb3461d615f4c5.pdf} }