@article { author = {bahreini, ahmad and ghadi, arezoo and bahreini, habiballah and azimpanah, razieh}, title = {Investigating the Permeability Properties of PVA/Pebax Nano composite Membrane with the use of Carbon Nanotube to Separate CO2 and CH4}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {41}, number = {3}, pages = {195-203}, year = {2022}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In this research the separation of methane and carbon dioxide gases by using the Nano composite membrane including poly ether block amide and poly vinyl alcohol as polymers with multi wall carbon Nano tubes is investigated.  The results of many studies show that the combinations of polyether block amide have great efficiency in making the polymeric membranes for separating gas. However, efforts are doing to improve the permeability and selectivity of such membranes.  In this study made membrane was made by using the solution molding and combining the percentage of 80 to 20 for polyether block amide/poly vinyl alcohol and carbon Nano tube with the amount of 0.5,1 and 2 percent of weight is used. Morphology and structure of the membrane made by TGA, FE-SEM, XRD and FTIR were checked.  Measuring the amount of permeability of the built membranes was done by using constant pressure-variable volume method.Total results showed that with the increase of pressure up to 8 bars, the amount of permeability of carbon dioxide and methane gases increases and the maximum amount of permeability for carbon dioxide and methane gases respectively are 4w6 and 36.44 bar.  The amount of selectivity for binary gases of carbon dioxide- methane increases with the increase of the amount of nanoparticle and the maximum amount in membrane contains 2percent of carbon nanotube and 8bar pressure with the amount of 11.69.}, keywords = {Gas separation,Polyether block amide,Poly vinyl alcohol,multi wall carbon nanotube}, title_fa = {بررسی ویژگی های عبوردهی غشای نانو کامپوزیتی PEBA/PVA با کاربرد نانو لوله کربنی برای جداسازی CO2 و CH4}, abstract_fa = {در این پژوهش جداسازی گازهای متان و کربن دی اکسید با استفاده از غشاهای نانوکامپوزیتی شامل پلی اتر بلاک آمید و پلی وینیل الکل به عنوان پلیمر، همراه با نانو لوله کربنی چند دیواره مورد بررسی قرارگرفت. نتیجه­ های پژوهش­ های بسیار نشان می‌دهد ترکیب های پلی اتر بلاک آمید کارایی بسیار خوبی در ساخت غشاهای پلیمری در زمینه جداسازی گاز دارند. با این حال تلاش ­ها برای بهبود ویژگی ­های تراوش­پذیری و انتخاب­ پذیری این گونه غشاها در حال انجام است. در این پژوهش غشای ساخته شده با استفاده از روش قالب ­گیری محلول و با ترکیب درصد 80 به 20 برای پلی اتر بلاک آمید / پلی وینیل الکل ساخته شد و از نانو لوله کربنی به میزان 5/0 ، 1 و 2 درصد وزنی استفاده شد. ریخت شناسی و ساختار غشاهای ساخته شده به وسیله آزمون­ های XRD،FT-IR ، FE-SEM و TGA موردبررسی قرار گرفت. اندازه­ گیری میزان تراوش ­پذیری غشاهای ساخته شده با استفاده از روش فشار ثابت - حجم متغیر انجام گرفت. با افزایش فشار تا 8 بار، میزان تراوش­ پذیری گاز کربن دی اکسید و متان افزایش یافت و بیش­ترین میزان تراوایی برای گازهای کربن دی اکسید و متان به ترتیب 426و 44/36 بارر بود. میزان انتخاب­پذیری برای گازهای دوتایی کربن­دی اکسید- متان  با افزایش مقدار نانو ذره افزایش یافت و بیش­ترین مقدار در غشای شامل 2 درصد نانو لوله کربنی و  فشار 8 بار به میزان 69/11 دیده شد.}, keywords_fa = {Gas separation,Polyether block amide,Poly vinyl alcohol,multi wall carbon nanotube}, url = {https://www.nsmsi.ir/article_242818.html}, eprint = {https://www.nsmsi.ir/article_242818_96a37a1fd1419c215a86ec9a020a2d39.pdf} }