@article { author = {Babaei, Elaheh and Bazyari, Amin}, title = {Synthesis of nanostructured high specific surface area iron (III) oxide using a home-made supercritical carbon dioxide dryer}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {42}, number = {1}, pages = {43-50}, year = {2023}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {This study aimed to produce nanostructured iron (III) oxide with a high surface area and high porosity. Iron (III) oxide was synthesized using the sol-gel method. The resulting gels were dried using two different methods, i.e., ambient drying (at 80 oC) and supercritical carbon dioxide drying. The produced iron oxide aerogel and xerogel were then calcined at 350 oC for 4 hours. The physico-chemical properties of the iron (III) oxide nanostructures were investigated using X-ray diffraction (XRD), nitrogen adsorption-desorption, and field emission scanning electron microscopy (FE-SEM) analyses. The results showed that the iron (III) oxide aerogel consisted of spherical nanoparticles. The X-ray diffraction pattern demonstrated the aerogel had a crystalline phase of pure hematite (α-Fe2O3). In addition, the produced aerogel had a specific surface area of 140 m2/g, the volume of porosities was 0.32 cm3/g, and the average diameter of pores was 8.9 nm. The produced xerogel also had a specific surface area of 65 m2/g, a volume of porosities of 0.18 cm3/g, and an average pore diameter of 10.8 nm. Therefore, the results of BET analysis confirmed that drying of iron oxide nanostructures using the supercritical drying method can lead to better preservation of its porous structure.}, keywords = {Supercritical Dryer,Supercritical CO2,Aerogel,Iron oxide,Hematite,Nanoparticle}, title_fa = {سنتز آهن (III) اکسید نانوساختار با سطح ویژه بالا با استفاده از دستگاه خشک کن دی‌اکسید کربن فوق بحرانی تولید داخل}, abstract_fa = {هدف از انجام این پژوهش تولید آهن (III) اکسید نانوساختار با سطح ویژه و تخلخل بالا بود. در این پژوهش نانوساختار مبتنی بر آهن (III) اکسید با استفاده از روش سل-ژل سنتز شد. ژل‌های حاصل با استفاده از دو روش خشک کردن در فشار محیط (در دمای oC 80) و خشک کردن دی‌اکسید کربن فوق بحرانی، خشک شدند. سپس آئروژل و زروژل اکسید آهن تولید شده در دمای oC 350 و به مدت 4 ساعت کلسینه شدند. مشخصات ساختاری و شیمیایی نانوساختارهای آهن (III) اکسید کلسینه شده با استفاده از آنالیزهای مشخصه‌یابی پراش پرتو ایکس (XRD)، جذب و واجذب نیتروژن (BET) و میکروسکوپ الکترونی روبشی نشر میدانی (FESEM) مورد بررسی قرار گرفت. نتیجه­ ها نشان می‌دهد که آئروژل آهن (III) اکسید متشکل از نانو ذره­ های کروی شکل است. الگو پراش پرتو ایکس نیز نشان می‌دهد که آئروژل حاصل دارای فاز بلوری هماتیت خالص (α-Fe2O3) است. به علاوه آئروژل تولید شده دارای سطح ویژه m2/g 140، حجم حفره‌ها cm3/g 32/0 و میانگین قطر حفره‌ها nm 9/8 است و زروژل تولید شده نیز دارای سطح ویژه m2/g 65، حجم حفره‌ها cm3/g 18/0 و میانگین قطر حفره‌ها nm 8/10 است؛ بنابراین نتیجه ­های آنالیز BET تائید می‌کند که خشک کردن اکسید آهن نانوساختار با استفاده از روش خشک کردن فوق بحرانی، منجر به حفظ بهتر ساختار متخلخل آن می‌گردد.}, keywords_fa = {خشک کن فوق بحرانی,دی‌اکسید کربن فوق بحرانی,آئروژل,اکسید آهن,هماتیت,نانوذره}, url = {https://www.nsmsi.ir/article_248322.html}, eprint = {https://www.nsmsi.ir/article_248322_007cc160a241bb65883ec4ac6759cfea.pdf} }