@article { author = {Jalali, Shohreh and Baniadam, Majid and Maghrebi, Morteza Maghrebi}, title = {The effect of microwave irradiation's power on in-situ polymerization of carbon nanotube/polystyrene nanocomposite and investigating the electrical conductivity}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {42}, number = {1}, pages = {35-42}, year = {2023}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {Carbon nanotube/polystyrene nanocomposites were synthesized via microwave-assisted in-situ polymerization. Since carbon nanotubes can absorb microwave irradiation, they can form hot spots in the mixture, and the auto thermal polymerization of styrene monomers can be initiated from their surface without using any chemical initiator. In order to investigate the effectiveness of the microwave irradiation on the polymerization process, carbon nanotube/polystyrene nanocomposites were synthesized via heating. Samples were characterized by TEM, FESEM, FT-IR, TGA and Raman spectra, and the electrical conductivity of samples were also measured. The results showed that using microwave irradiation can result in forming a polymeric layer on carbon nanotubes, and the resultant nanocomposite had a few agglomerations. In addition, by increasing the power of microwave irradiation, the thickness of the polymeric layer increased and electrical conductivity decreased.}, keywords = {Carbon nanotubes,Microwave,polymerization,Nanocomposites}, title_fa = {بررسی اثر توان مایکروویو روی میزان پلیمریزاسیون درجا پلی استایرن روی نانولوله کربنی و ویژگی های الکتریکی نانوکامپوزیت حاصله}, abstract_fa = {نانوکامپوزیت‌‌های نانولوله کربنی/ پلی استایرن به کمک پلیمریزاسیون در جا تحت تابش امواج مایکروویو سنتز شدند. به علت اینکه نانو لوله‌های کربنی جاذب مایکروویو هستند در اثر تابش مایکروویو گرم شدند و پلیمریزاسیون حرارتی خود به خودی استایرن بدون استفاده از آغازگر انجام شد. برای بررسی تاثیر امواج مایکروویو در پلیمریزاسیون، سنتز نانو کامپوزیت نانو لوله کربنی/پلی استایرن به کمک حرارت دهی نیز انجام شد. ریخت­ شناسی نمونه‌ها توسط میکروسکوپ الکترونی روبشی نشر میدانی و میکروسکوپ الکترونی عبوری مورد مطالعه قرار گرفت. مشخصه یابی نمونه‌ها به کمک آنالیز‌های طیف سنجی فروسرخ تبدیل فوریه، گرما سنج وزنی و رامان  انجام شد و رسانایی الکتریکی نمونه ها نیز بررسی گردید. نتیجه­ ها نشان دادند که استفاده از امواج مایکروویو می‌تواند باعث ایجاد یک لایه پلی استایرنی روی نانو لوله‌ها شود و نانو کامپوزیت حاصله دارای کلوخه‌های اندکی بود. علاوه بر این، با افزایش توان مایکروویو، ضخامت لایه پلیمری ایجاد شده روی نانولوله‌ها افزایش و رسانایی الکتریکی نانو کامپوزیت‌ها از 37/14 زیمنس بر متر برای نانوکامپوزیت سنتز شده با حرارت (صفر وات) به 17/7، 39/5 و 94/2 زیمنس بر متر به ترتیب برای نانوکامپوزیت سنتز شده با مایکروویو با قدرت300، 500 و 700 وات، کاهش یافت. }, keywords_fa = {Carbon nanotubes,Microwave,polymerization,Nanocomposites}, url = {https://www.nsmsi.ir/article_249055.html}, eprint = {https://www.nsmsi.ir/article_249055_424994f553687a1b7f8a644995059989.pdf} }