@article { author = {Shojaei, Seyed Behzad and Miri, Rohaldin and Bazyari, Amin}, title = {Performance Evaluation and Modeling of the Adsorption Behavior of Iron Oxide Nanoparticles Synthesized by the Sol-Gel Method in the Adsorption of Asphaltene Extracted from Crude Oil}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {42}, number = {2}, pages = {155-164}, year = {2023}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {The asphaltene present in crude oil creates various challenges for its production, processing, and transportation, with the most important ones being wellbore and pipeline fouling, deactivation, and poisoning of catalysts. In this study, the adsorption of asphaltene extracted from a crude oil sample on five iron oxide nanoparticles synthesized by the Pechini method, in the presence and absence of propylene oxide and polyethylene glycol as common agents used in the sol-gel method for gel formation, was investigated. Solutions with different percentages of asphaltene and toluene were prepared, and a specific amount of iron nanoparticles (4 g/l) was added to the solutions. The mixtures were shaken for 15 hours at 250 rpm. The unknown concentration of the samples was determined by UV-visible analysis. The results indicated that the iron oxide synthesized without propylene oxide and polyethylene glycol, with an adsorption capacity of 37.31%, exhibited the best performance in asphaltene adsorption and was economically more viable. The adsorption results were described using Langmuir and Freundlich isotherms, and the physical properties of the nanoparticles were determined by XRD and BET analyses.}, keywords = {nanoparticles,Iron oxide,Asphaltene deposition,Adsorption,Sol-gel,Pechini}, title_fa = {بررسی عملکرد و مدل‌سازی هم‌دمای جذب نانوذره اکسید آهن سنتز شده به روش سل-ژل در جذب آسفالتین استخراج‌شده از نفت خام}, abstract_fa = {آسفالتین موجود در نفت خام مشکل‌های زیادی برای تولید، فرآوری و انتقال آن ایجاد می‌کند که مهم‌ترین آن‌ها، گرفتگی دهانه چاه و خط لوله، غیرفعال کردن و مسمومیت کاتالیست‌ها می‌باشد. در این مطالعه جذب آسفالتین استخراج‌ شده از یک نمونه نفت خام بر روی پنج نانوذره اکسید آهن سنتز شده به روش پچینی در حضور و عدم حضور پروپیلن اکسید و پلی‌اتیلن گلیکول، به عنوان عامل‌های مرسوم مورد استفاده در روش سل-ژل برای تشکیل ژل، بررسی شد. محلول‌هایی با ترکیب درصد متفاوت از آسفالتین و تولوئن تهیه و مقدار مشخصی از نانوذره‌های آهن g/l 4 در درون محلول‌ها ریخته شد و برای مدت 15 ساعت بر روی شیکر با دور rpm 250 قرار گرفت. غلظت مجهول نمونه‌ها توسط آنالیز UV-visible مشخص شد. نتیجه‌ها نشان داد اکسید آهن سنتز شده بدون پروپیلن اکسید و پلی‌اتیلن گلیکول با میزان جذب 31/37 بهترین عملکرد را در جذب آسفالتین داشته و از منظر اقتصادی نیز مقرون به صرفه‌تر است. نتیجه‌های جذب با استفاده از هم‌دما‌های لانگمویر و فرندلیچ توصیف شد و ویژگی‌های فیزیکی نانوذره‌ها توسط آنالیزهای XRD و BET تعیین شد.}, keywords_fa = {نانوذره‌ها,اکسید آهن,رسوب آسفالتین,جذب سطحی,سل ژل,پچینی}, url = {https://www.nsmsi.ir/article_250791.html}, eprint = {https://www.nsmsi.ir/article_250791_f4dab5594688c215142e657614e054ff.pdf} }