@article { author = {Akbari Choubar, Ali and Alavi Amlashi, Seyed Mehdi}, title = {The Effect of Vanadium Loading on the Performance of Ti-phosphate-supported V2O5 Catalyst in the Selective Oxidation of o-xylene to Phthalic Anhydride}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {35}, number = {4}, pages = {1-10}, year = {2017}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In this work, the performance of Ti-phosphate-supported vanadium (v) oxide catalyst in The reaction of phthalic anhydride production by selective catalytic oxidation of o-xylene was investigated. Four catalyst samples with the active phase of 2, 7, 12 and 15 wt% were made in order to investigate the effect of vanadium loading.To determine the characteristics of samples, a number of experiments such as BET, XRD, SEM, NH3-TPD, and TGA were done. Moreover, the reactor test was carried out in order to evaluate activity and selectivity to phthalic anhydride. According to XRD patterns before the reaction, titania was observed in the anatase phase which was the desirable phase for the reaction of o-xylene oxidation to phthalic anhydride. With increasing vanadium loading, the number of acidic sites on catalyst surface decreases. In addition, the catalytic activity and selectivity to phthalic anhydride were improved. At high values of vanadium, the effect of active phase loading on the catalytic performance decreased due to the formation of V2O5 on the catalyst surface. 15V-Tip sample had the most selectivity to phthalic anhydride with values of 37% at the temperature of 450oC.}, keywords = {Selective oxidation,Phthalic anhydride,Vanadium(V) oxide,Ti-phosphate,Vanadium loading}, title_fa = {اثر بارگذاری وانادیم بر عملکرد کاتالیست وانادیم پنتا اکسید بر پایه تیتانیم فسفات در فرایند اکسایش انتخابی ارتوزایلن به انیدرید فتالیک}, abstract_fa = {در این پژوهش به عملکرد کاتالیست وانادیم پنتا اکسید بر پایه تیتانیم فسفات در واکنش تولید انیدرید فتالیک به وسیله اکسایش کاتالیستی انتخابی با ارتوزایلن پرداخته شد. برای بررسی اثر بارگذاری وانادیم ، 4 نمونه کاتالیست با مقدار فاز فعال 2 ، 7 ، 12 و 15% وزنی ساخته شد . برای تعیین ویژگی­ های نمونه­ ها ، آزمایش های BET ، XRD ، SEM ، NH3-TPD ، TGA و آزمون راکتوری برای ارزیابی فعالیت و گزینش پذیری انیدرید فتالیک صورت گرفت. بر اساس الگوهای XRD پیش از واکنش ، تیتانیا در فاز بلوری آناتاز دیده شد که برای واکنش اکسایش انتخابی ارتوزایلن، فاز دلخواه است. با افزایش بارگذاری وانادیم ، تعداد سایت­ های اسیدی سطح کاتالیست کاهش یافته و فعالیت کاتالیستی و گزینش پذیری انیدرید فتالیک بهبود می‌یابد. در مقدارهای بالای وانادیم به دلیل تشکیل بلورهای V2O5 روی سطح کاتالیست، تاثیر بارگذاری فاز فعال بر روی عملکرد کاتالیستی کاهش می‌یابد. نمونه 15V-TiP بیش ­ترین گزینش پذیری نسبت به انیدرید فتالیک با مقدار 37% در دمای 450 درجه سلسیوس نشان داد.}, keywords_fa = {اکسایش انتخابی,انیدرید فتالیک,وانادیم پنتا اکسید,تیتانیم فسفات,بارگذاری وانادیم}, url = {https://www.nsmsi.ir/article_25804.html}, eprint = {https://www.nsmsi.ir/article_25804_2842025565dc2f2a2f5af58e23c2c6df.pdf} }