@article { author = {Kazemi, Fatemeh and Bahrami, Ataallah and Abdollahi Sharif, Jafar}, title = {Study of Flotation Kinetic of Kermanshah State Gilsonite}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {37}, number = {1}, pages = {197-206}, year = {2018}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In order to determination of flotation kinetic and particle size effect on it, flotation tests were conducted on a Gilsonite sample of Kermanshah state. Therefore, rougher and cleaner flotation tests through the oil collector - MIBC (Methyl Iso Butyl Carbonyl) frother, Gasoline collector – Pine oil frother and one test without any collector and frother, was done. Concentrates obtained from the tests weighted and ash analysis was taken from them, also all of the concentrates were grading, in different intervals. Then, for each test, drawn recovery – time graph and were fitted by using different first-order kinetics model. According to the graph observed that the results of all tests have high compliance with first order classic model. Kinetics constant calculated with the classic model are as follows, the rougher tests, oil collector – MIBC frother 0.0303, Gasoline collector – pine oil frother 0.0301 and test without any collector and frother is 0.0161. Also, the amount of k respectively the above collector and frother 0.0168, 0.048, 0.013 was calculated in cleaner tests, then the retention time and flotation cell volume according to k calculated. In this research, studied the relationship between flotation rate constant, maximum recovery and particle size too. The results show that maximum flotation recovery and flotation rate in rougher tests belongs to flotation test without any collector and frother with a particle size in rang -850,+500 µm. as well as, in the cleaner test, maximum flotation recovery and flotation rate related to the test with Gasoline collector and pine oil frother with -850,+500 µm particle size.}, keywords = {Kinetic of flotation,First order kinetics models,Gilsonite,Collector & frother,grading}, title_fa = {مطالعه سینتیکی فلوتاسیون گیلسونیت های استان کرمانشاه}, abstract_fa = {به­ منظور تعیین سینتیک فلوتاسیون و تأثیر اندازه ذره ­ها بر روی آن، آزمایش ­های فلوتاسیون بر روی نمونه ­ای از گیلسونیت­ های استان کرمانشاه انجام شد. بدین منظور آزمایش ­های فلوتاسیون رافر و کلینر با کلکتور نفت ـ کف ­ساز MIBC ، کلکتور گازوئیل ـ کف ­ساز روغن­کاج و یک آزمایش نیز بدون استفاده از کلکتور و کف­ ساز انجام گرفت. در هر آزمایش کنسانتره­ های به دست آمده توزین و از آن ­ها آنالیز درصد خاکستر گرفته شد، همچنین همه کنسانتره ­های بازه ­های زمانی گوناگون دانه­ بندی شدند. سپس نمودارهای بازیابی ـ زمان مربوط به هر آزمایش رسم شد و با استفاده از مدل­ های گوناگون سینتیک مرتبه اول برازش داده شدند. نتیجه ­ها نشان ­دهنده تطابق بالای نتیجه ­های همه آزمایش­ ها با مدل کلاسیک مرتبه اول است. مقدارهای ثابت سینتیک محاسبه شده با این مدل برای آزمایش­ های رافر، با کلکتور نفت ـ کف ­ساز MIBC، 0303/0 ، کلکتور گازوئیل ـ کف ­ساز روغن­کاج  0301/0 و بدون کلکتور و کف­ ساز 0161/0 است. برای آزمایش­ های کلینر نیز مقدار k  به ترتیب کلکتور و کف ­سازهای بالا 0168/0 ، 048/0 و 013/0 محاسبه شد، در ادامه با توجه به مقدارهای kزمان ماند و حجم سلول فلوتاسیون به دست آمد.در این پژوهش، رابطه بین میزان ثابت فلوتاسیون، بیش ­ترین مقدار بازیابی و اندازه ذره ­ها هم مورد مطالعه قرار گرفت. نتیجه­ ها نشان می­ دهد که بیشینه مقدار بازیابی و ثابت فلوتاسیون در آزمایش ­های رافر متعلق به فلوتاسیون گیلسونیت بدون استفاده از کلکتور و کف ­ساز، با اندازه ذره­ های µm500+ , 850- است، در آزمایش­ های کلینر نیز بیش ­ترین مقدار kو بازیابی متعلق به آزمایش کلینر با کلکتور گازوئیل و کف ­ساز روغن­ کاج با اندازه ذره ­های µm500+ , 850- است.}, keywords_fa = {سینتیک فلوتاسیون,مدلهای سینتیکی مرتبه اول,گیلسونیت,کلکتور و کفساز,دانه بندی}, url = {https://www.nsmsi.ir/article_27264.html}, eprint = {https://www.nsmsi.ir/article_27264_7b443cfeffce9231d1030809a526a4c8.pdf} }