@article { author = {Bayat, Nima and Rezaei, Mehran and Meshkani, Fereshteh}, title = {The Study of the Effects of Promoters on the Catalytic Performance of the Nickel-Based Catalyst in Methane Thermocatalytic Decomposition}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {36}, number = {1}, pages = {95-103}, year = {2017}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In the present work, 50%Ni and promoted 50%Ni-10%M (M=Ce, Mn, Mo, Pd) catalysts supported on nanocrystalline gamma alumina were prepared by sol-gel method and employed in the thermocatalytic decomposition of methane for production of COx-free hydrogen and carbon nanofibers. The catalysts were prepared by the wet impregnation method and characterized by XRD, BET, SEM, TPO and TPR techniques. The results revealed that the prepared samples exhibited mesoporous structure with high surface area. The γ-alumina support possessed a high surface area of 188.2 m2/g. In addition, the promoted catalysts showed the BET surface area in the range of 89.0 to 45.8 m2/g depending on the type of promoter. Moreover, TPR profiles revealed that the addition of palladium improved the catalyst reducibility. The thermocatalytic decomposition of methane was performed at different temperatures in order to investigate the effects of promoters and reaction temperature on the catalytic performance. The obtained results demonstrated that the addition of palladium compared to the other promoters improved the catalytic activity, especially at high temperatures. In the other hands, the results of stability test showed that the addition of palladium to the nickel-based catalysts significantly improved the catalyst lifetime. Also, the SEM analysis confirmed the formation of carbon nanofibers on the spent catalysts.}, keywords = {Hydrogen,Carbon nanofiber,Thermocatalytic decomposition,Promoter,Nickel-alumina,Sol-gel}, title_fa = {مطالعه اثر بهبود دهنده ها برعملکرد کاتالیست مبتنی بر نیکل در تجزیه ترموکاتالیستی متان}, abstract_fa = {در این پژوهش کاتالیست Ni50% و کاتالیست­ های بهبود یافتهM10%Ni-50% که (M=Ce, Mn, Mo, Pd) بر پایه گاما آلومینای نانو بلوری تهیه شده به روش سل ـ ژل برای فرایند تجزیه ترموکاتالیستی متان به هیدروژن بدون اکسیدهای کربن و نانو رشته های کربنی به کار گرفته شدند. کاتالیست­ ها به روش تلقیح تر آماده شده و با روش­های آنالیز پراش پرتوی  X(XRD)، احیای برنامه­ ریزی شده دمایی(TPR) و BET تعیین ویژگی­ها شدند. نتیجه­ ها نشان داد که نمونه­ های تهیه شده دارای ساختار نانو حفره ­ای با مساحت سطح ویژه بالا هستند. مساحت سطح گاما آلومینا به عنوان پایه کاتالیست g/2m 2/188 و کاتالیست­ های بهبود یافته بسته به نوع بهبود دهنده در بازه g/2m8/45-0/89 می­ باشد. نتیجه­ های به­دست آمده از نمودارهای TPR نشان می­ دهد که افزودن پالادیوم احیا پذیری کاتالیست را بهبود می ­دهد. به منظور بررسی عملکرد کاتالیستی نمونه­ ها، واکنش تجزیه ترموکاتالیستی متان در دماهای گوناگون انجام شد و نتیجه ­ها بیانگر آن بود که افزودن پالادیوم، در مقایسه با سایر بهبود­دهنده­ ها عملکرد کاتالیستی را به­طور چشمگیری بهبود می ­دهد. از سویی نتیجه­ های آزمون پایداری نشان داد که معرفی پالادیوم به کاتالیست مبتنی بر نیکل طول عمر کاتالیست را به طور چشمگیری بهبود می ­دهد. همچنین تصویرهای SEM تأیید کرد که کربن به­صورت رشته­ای تولید می ­شود.}, keywords_fa = {هیدروژن,نانو رشته های کربنی,تجزیه ترموکاتالیستی,بهبود دهنده,نیکل-آلومینا,سل ژل}, url = {https://www.nsmsi.ir/article_27916.html}, eprint = {https://www.nsmsi.ir/article_27916_fbe8dc545703583bbb967a81c3f34db1.pdf} }