@article { author = {Rahmani, Nlioofar and Bagheri Garmarudi, Amir and Khanmohammadi Khorrami, Mohammadreza}, title = {Optimizing the Template Free Fabrication Approach for Synthesis of ZSM-5 Nanozeolite}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {37}, number = {3}, pages = {27-36}, year = {2018}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In this study, nanosized ZSM-5 zeolite was synthesized for examining of optimum conditions of synthesis and the formation of zeolite ZSM-5 under different conditions based on two-level factorial experimental design, by hydrothermal method. Samples were synthesized without organic template and different conditions including the molar composition of the synthetic gel and reaction time were studied in a wide range. Then the samples for studying the formation of zeolite ZSM-5 were analyzed by X-ray diffraction and the results were compared with each other to obtain optimal conditions. Purpose of optimizing the assay was to achieve nanosized ZSM-5 zeolite with appropriate morphology and stability. Characterization of nanoparticles was performed by the Scanning electron microscope, Transmission electron microscope Fourier transform infrared spectroscopy and thermal gravimetric analysis. According to the two-level factorial experiment design, optimal conditions for the synthesis of nano-zeolite ZSM-5 include: Na2O/SiO2=0.2،SiO2/Al2O3 =60 ،H2O/SiO2=53, Aging time=72h. Scanning electron microscopy showed that the smallest and the most optimal of particle size is approximately 44 nm and Fourier-transform infrared spectroscopy and Thermal gravimetric analysis confirmed the synthesis of nano-zeolite ZSM-5.}, keywords = {Nano zeolite,ZSM-5,Optimization,Experimental design}, title_fa = {بهینه سازی شرایط سنتز نانوزئولیت ZSM-5 بدون قالب با استفاده از طراحی آزمایش}, abstract_fa = {دراین مطالعه، نانوزئولیت­ های ZSM-5 برای بررسی شرایط بهینه سنتز و شکل ­گیرى، در شرایط گوناگون بر پایه طراحی آزمایش فاکتوریل دو سطحی، با روش هیدروترمال تهیه شدند. فرایند سنتز آن­ ها بر پایه یک روش بدون قالب ­ریزى و شرایط گوناگون ساخت از جمله ترکیب مولی ژل سنتزی و زمان واکنش در یک بازه گسترده بررسی شد. سپس این نمونه­ ها برای بررسى چگونگی شکل ­گیرى ساختار ZSM-5 توسط روش پراش پرتو X ارزیابی و نتیجه­ ها برای به­ دست آوردن شرایط بهینه با یکدیگر مقایسه شد. هدف از بهینه نمودن روش، دستیابی به نانوذره­ های زئولیت ZSM-5 با کوچک­ ترین اندازه ­ها، ریخت شناسی و پایداری مناسب بود. ویژگی­ های نانوذره ­های تهیه شده توسط میکروسکوپ الکترونی روبشی، میکروسکوپ الکترونی عبوری، طیف سنج فروسرخ تبدیل فوریه و آنالیز وزن سنجی گرمایی تعیین شد. مطابق طراحی آزمایش فاکتوریل دو سطحی، شرایط بهینه برای سنتز نانو زئولیت ZSM-5 عبارتند از: ,Na2O/SiO2=0.260=SiO2/Al2O3،53=H2O/SiO2 و زمان پیرسازی=72 ساعت. تصویرهای میکروسکوپ الکترونی روبشی نشان داد که کوچک­ ترین و بهینه ترین اندازه ذره ­های زئولیت ZSM-5حدود 44 نانومتر است و طیف سنج فروسرخ تبدیل فوریه و نیز آنالیز وزن سنجی گرمایی، سنتز نانوزئولیت ZSM-5را تأیید کرد.}, keywords_fa = {نانوزئولیت,ZSM-5,بهینه‌سازی,طراحی آزمایش}, url = {https://www.nsmsi.ir/article_28236.html}, eprint = {https://www.nsmsi.ir/article_28236_6f6eee7e92534055b5783be710731c58.pdf} }