@article { author = {Pashai Gatabi, Maliheh and Milani Moghaddam, Hossain and Ghorbani, Mohsen}, title = {Study of Structural, Surface and Magnetic Properties of Carbon Nanotubes / Iron Oxides Nanocomposites}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {37}, number = {3}, pages = {13-26}, year = {2018}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In this study, carbon nanotubes coated with iron oxide nanoparticles were synthesized by a co-deposited simultaneous method with initial salt ratios of 2 to 1 and 4 to 1. In order to study the structural, surface and magnetic properties, electron microscopy, magnetic residue, infrared Fourier transform, Raman, x-ray diffraction, nitrogen adsorption-desorption, and zero-point calculations were studied. The results obtained from the structural analysis indicate that iron oxide nanoparticles with 12.2 nm and 13.5 nm are in the range of 2 to 1 and 4 to 1 on carbon nanotubes, respectively. Also, for these proportions, the behavior of superparamagnetic with saturated magnetization was 11.48 mg/g and 27.97 emu/g, respectively. The results showed that, by choosing the right method and optimizing the effective parameters in the method of synthesis of magnetic carbon nanotubes, it is possible to directly change their surface properties and, as a result, nanostructures with specific surface properties in the “Wide” range of laboratory conditions.}, keywords = {Nanocomposite,Iron oxide nanoparticles,Carbon nanotubes,Chemical precipitation,In-situ coprecipitation}, title_fa = {مطالعه ویژگی های ساختاری، سطحی و مغناطیسی نانوکامپوزیت نانولوله های کربنی/ آهن اکسید}, abstract_fa = {در این پژوهش نانولوله­ های کربنی آراییده شده با نانوذره­ های آهن اکسید به روش هم رسوبی هم ­زمان و با نسبت ­های نمک اولیه 2 به 1 و 4 به 1  سنتز شد. به منظور بررسی ویژگی­ های ساختاری، سطحی و مغناطیسی با استفاده از آنالیزهای میکروسکوپ الکترونی عبوری، پسماند مغناطیسی، تبدیل فوریه فروسرخ، رامان، پراش پرتو x، جذب ـ واجذب نیتروژن و محاسبه مقدارهای نقطه بار صفر مورد مطالعه قرار گرفت. نتیجه­ های به دست آمده از تحلیل ساختاری دلالت بر تشکیل نانوذره های آهن اکسید با اندازه­های nm 2/12 و nm 5/13 به ترتیب برای نسبت­ های 2 به 1 و 4 به 1 بر روی نانولوله­ های کربنی دارد. همچنین، برای همین نسبت ها رفتار ابرپارامغناطیسی با مغناطش اشباعی به ترتیب برابر با emu/g  84/11 و emu/g 9/27 دیده شده است. نتیجه­ ها نشان داد با انتخاب روش درست و بهینه سازی پارامترهای تأثیرگذار در روش سنتز نانولوله­ های کربنی مغناطیسی می­توان به طور مستقیم ویژگی­ های سطحی آن ­ها را تغییر داده و در نتیجه نانوساختاری با ویژگی­ های سطحی مشخص در گستره وسیعی از شرایط آزمایشگاهی به ­دست آورد.}, keywords_fa = {نانوکامپوزیت,نانوذره های آهن اکسید,نانولوله های کربنی,رسوب دهی شیمیایی,هم رسوبی هم زمان}, url = {https://www.nsmsi.ir/article_28240.html}, eprint = {https://www.nsmsi.ir/article_28240_0368ebf9a789399e28f2877c8baa9a93.pdf} }