@article { author = {Ghazanfar-Agdam, Mahsa and Majdan-Cegincara, Roghayeh}, title = {Effect of Magnesium Oxide Nanoparticles on Rheological and Volumetric Properties of Solutions Containing Polyethylene Glycol}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {37}, number = {2}, pages = {45-60}, year = {2018}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {Polyethylene glycols, PEGs, with molar masses of 2000 and 6000 g/mol were dissolved in PEG with a molar mass of 400 g/mol to prepare the homogeneous solutions. Rheological properties and density values for these solutions have been measured. Nanoparticles of MgO were added to these solutions and dispersed by an ultrasonic bath for making homogeneous nanofluids. The UV-Vis spectroscopy, zeta potential, and dynamic light scattering have been used to specify the stability and particle size distribution of colloidal solutions studied. Density values of prepared nanofluids have been measured at different temperatures. The excess molar volumes were calculated from density data for highlighting the interparticle interactions occurred in nanofluids. Polynomial equation and Singh et al. model were used for fitting the excess molar volume values of binary and ternary systems, respectively. Fluid flow and suspense structure of MgO nanoparticles in solutions of PEG400, PEG400-PEG2000, and PEG400-PEG6000 were studied by measuring the rheological properties at T=298.15 K. Bingham plastic and Herschel-Bulkley equations have been used for modeling the dependence of shear stress on shear rate. Carreau-Yasuda model has also been modified for modeling the viscosity values.}, keywords = {Nanofluids,Magnesium oxide nanoparticles,Polyethylene glycol,Rheological properties,Volumetric Properties}, title_fa = {اثر نانوذره های منیزیم اکسید در ویژگی های حجمی و رئولوژیکی محلول های دارای پلی اتیلن گلیکول}, abstract_fa = {محلولهای همگنی از انحلال پلیمر پلی اتیلن گلیکول (PEG) با جرم مولکولی (g/mol) 2000 و 6000 (PEG2000 و PEG6000) درPEGبا جرم مولکولی (g/mol) 400 (PEG400) تهیه شد؛ ویژگی ­های رئولوژیکی و دانسیته این محلول­ ها اندازه ­گیری شد. نانوذره ­های منیزیم اکسید (MgO) با اعمال موج فراصوت درون محلول­های پلیمری تهیه شده پخش شد. با استفاده از طیف سنجی مرئی – فرابنفش و اندازه گیری پتانسیل زتا، پایداری ایننانوسیال ها یا محلول های کلوئیدی بررسی شد. دستگاه تفرق نور پویا (DLS) برای اندازه گیری توزیع اندازه ذره ­های موجود در نانوسیال ها مورد استفاده قرار گرفت. دانسیته محلول های کلوئیدی مدنظر در دماهای گوناگون اندازه گیری شد و کمیت حجم مولی مازاد به منظور مشخص نمودن برهمکنش های درون نانوسیال محاسبه شد. داده های حجم مولی مازاد برای سامانه ­های دوجزئی توسط یک چندجمله ای و برای سامانه ­های سه جزئی توسط معادله سینگ و همکاران مورد برازش قرار گرفت. با اندازه ­گیری ویژگی­ های رئولوژیکی، رفتار جاری شدن محلول­ ها و ساختارهای تشکیل یافته درون محلول­ های کلوئیدی در دمای 15/298 کلوین مورد مطالعه قرار گرفت. معادله­ های پلاستیک بینگهام و هرشل بالکلی برای مدل­ سازی بستگی تنش برشی به سرعت برشی مورد استفاده قرار گرفت؛ معادله کاریویاسودای تصحیح شده در این کار پژوهشی برای مدل­ سازی بستگی گرانروی به سرعت برشی استفاده شد.}, keywords_fa = {نانوسیال,نانوذره های منیزیم اکسید,پلی اتیلن گلیکول,ویژگی های رئولوژیکی,ویژگی های حجمی}, url = {https://www.nsmsi.ir/article_28243.html}, eprint = {https://www.nsmsi.ir/article_28243_5352cbc8df6f9af1e4a22d767dd2b38c.pdf} }