@article { author = {Kiani Borazjani, Masoumeh}, title = {Prediction of Thermodynamic Properties of nanofluids Using the Morse Potential and Quantum Correction of the Second Virial Coefficient with a Generalized Statistical Mechanics Equation of State}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {39}, number = {2}, pages = {229-248}, year = {2020}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In this work, some thermodynamic properties of nanoparticles, nanofluids containing a base fluid, and nanofluids with two different bases were assessed at the pressure range from 0.1 to 45 MPa and a temperature range from 273 to 363 K. this study focuses on nanofluids such as Al2O3, CuO, Co3O4, SnO2, TiO2-Rutile, TiO2-Anatase, ZnO and the base fluid containing H2O, Ethylene glycol and polyethylene glycol (with a molecular weight of 400). The used Equation of State (EOS) is the Tao–Mason (TM) equation of state which is based on statistical mechanics and its parameters can be calculated by a potential function. According to the quantum properties of nanoparticles, a quantum correction was used to calculate the second virial coefficient. To consider the polar effects of the material, the Morse three-parameter potential function was used which is more flexible than the usual two-parameter potentials functions such as Lenard Jones 6-12. Initially, the pure-component parameters of nanoparticles were fitted to the saturated liquid density data, and then the parameters were used for mixtures. Also, a binary parameter was fitted to consider the interactions between two different molecules in the mixtures. In total, from 1181 data points examined, the average absolute deviation between the calculated densities and the experimental ones is of the order of 0.5%. According to the results, this equation of state has good accuracy for calculating and predicting the density of nanofluids.}, keywords = {Volumetric Properties,Nano-fluids,Equation of state,Second Virial Coefficient,Quantum Properties}, title_fa = {پیش بینی ویژگی‌های حجمی نانوسیال ها با استفاده از تابع پتانسیل مورس و تصحیح کوانتمی ضریب دوم ویریال به همراه یک معادله حالت مکانیک آماری تعمیم یافته}, abstract_fa = {در این پژوهش تعدادی از ویژگی­ های ترمودینامیکی نانوذره­ ها، نانوسیال­ ها دارای یک سیال پایه و نانوسیال­ های دارای مخلوط دو سیال پایه در بازه ­ی فشاری 45-1/0 مگاپاسکال و بازه­ ی دمایی 363-273 کلوین محاسبه و پیش ­بینی شدند. نانوذره ­های مورد بررسی Al2O3، CuO، Co3O4، SnO2، TiO2-Rutile، TiO2-Anatase و ZnO بوده و سیال‌های پایه نیز شامل آب، اتیلن گلیکول و پلی اتیلن گلیکول (با جرم مولکولی 400) می ­باشند. معادله حالت مورد استفاده در این کار معادله حالت تائو- میسون است که بر مبنای مکانیک آماری استوار می‌باشد. پارامترهای وابسته به دما در این معادله حالت شامل ضریب دوم ویریال،، و دو پارامتر  و  می باشد که با توجه به ویژگی­ های کوانتمی نانوذره­ ها، از یک قسمت تصحیح کوانتمی برای محاسبه ضریب دوم ویریال استفاده شد. همچنین در محاسبه این سه ضریب نیاز به استفاده از یک تابع پتانسیل می باشد که برای لحاظ کردن اثرهای قطبی مواد از تابع پتانسیل سه پارامتری مورس استفاده شد که نسبت به تابع­ های پتانسیل‌های دو پارامتری معمول مانند لنارد جونز 6-12 از انعطاف بیش ­تری برخوردار است.نخست پارامترهای موجود در تابع پتانسیل توسط داده‌های دانسیته در حالت خالص (فشار 1/0 مگاپاسکال) مورد برازش قرار گرفتند و سپس برای حالت مخلوط از همین پارامترها استفاده شد. یک پارامتر دوتایی نیز برای در نظر گرفتن برهمکنش‌های بین دو مولکول متفاوت در سامانه‌های مخلوط برازش شد. در مجموع برای تعداد 1181 داده برای نانوسیال­ ها میزان میانگین خطای مطلق برابر با 5/0 گزارش شد. طبق نتیجه­ هایبه ­دست آمده، این معادله حالت از دقت خوبی برای محاسبه و پیش بینی دانسیته نانوسیال­ ها برخوردارمی‌باشد.}, keywords_fa = {ویژگی های حجمی,نانوسیال ها,معادله حالت,ضریب دوم ویریال,ویژگی های کوانتومی}, url = {https://www.nsmsi.ir/article_34041.html}, eprint = {https://www.nsmsi.ir/article_34041_a45027620c2f8b515f77473498a4651d.pdf} }