@article { author = {Karimi, Ali and Tavassoli, Ahmmad and Jafarian, Sajedeh}, title = {Nanocatalytic Gasification of Bagasse for Production of Hydrogen-Rich Gas via Steam Reforming}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {39}, number = {4}, pages = {249-260}, year = {2021}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {Hydrogen production from biomass gasification via steam reforming can be introduced as one of the most attractive methods for overcoming energy challenges. In this study, the gasification of bagasse process in the presence of steam performed in fixed bed reactor under 850˚C and atmospheric pressure has been conducted in two stages of noncatalytic and catalytic. To evaluate the effect of active metal particles size, Ni12%-Fe6%/γ-Al2O3 bimetallic nanocatalysts were prepared through microemulsion and impregnation methods. The chemical and physical properties of the nanocatalysts were characterized by TPR, XRD, TEM, and BET techniques. The microemulsion technique especially at the lowest Water/Surfactant (W/S) ratio caused synthesis of the active metal average particle size and increased dispersion on the support. Using the microemulsion technique especially at lower W/S increased the hydrogen yields by a factor of 2.8. Also, Ni-Fe/γ-Al2O3 catalyst promoted by 1 percentage of ruthenium, increased the hydrogen yields by a factor of 3.8 compared to the noncatalytic process.}, keywords = {bagasse gasification,Ni-Fe nanocatalyst,Hydrogen production,Microemulsion,Impregnation}, title_fa = {گازی‌سازی نانوکاتالیستی زیست‌توده باگاس به گاز غنی از هیدروژن با ریفرمینگ با بخار آب}, abstract_fa = {تولید هیدروژن از زیست‌توده باگاس با فرایند گازی‌سازی در حضور بخار آب یک روش مناسب برای مقابله با چالش‌های انرژی است. در این پژوهش، فرایند گازی‌سازی باگاس در حضور بخار آب در یک راکتور بستر ثابت در دمای oC850 و فشار یک اتمسفر در دو مرحله بدون کاتالیزگر و با کاتالیزگر انجام شد. برای بررسی تأثیر اندازه ذره کاتالیست بر راندمان گازی‌سازی، کاتالیست‌های دوفلزی  12%Ni6%Fe/γ-Al2O3 با دو روش تلقیح و میکروامولسیون ساخته و ویژگی­ های شیمی ـ ‌فیزیکی آن­ ها با روش ‏های TPR، XRD، TEM وBET  بررسی شدند. فناوری میکروامولسیون در تهیه کاتالیزگر، به‌ویژه در نسبـت‌های آب/ سورفکتانت کم، باعث سنتز ذره ­های فاز فعال با اندازه کم ‏تر و پخش یکنواخت تر در پایه می‌شود. کاتالیسـت Ni-Fe/γ-Al2O3  ساخته‏ شده به ‏روش میکـروامولسیون با کم‏ ترین نسبت آب/ سـورفکتـانـت بازده تولیـد هـیدروژن را 8/2 برابر حالـت بدون کاتـالیسـتی کرد. هم‌چـنین در کاتالیـسـت Ni-Fe/γ-Al2O3 بهبود داده‏ شده با 1 درصد روتنیوم، افزایش تولید هیدروژن 8/3 برابر حالت بدون کاتالیستی بود.}, keywords_fa = {bagasse gasification,Ni-Fe nanocatalyst,Hydrogen production,Microemulsion,Impregnation}, url = {https://www.nsmsi.ir/article_35977.html}, eprint = {https://www.nsmsi.ir/article_35977_5de9ece2fc7fc4f5adf74fbaeb588c6e.pdf} }