@article { author = {Shajari, Golnaz and Gholizadeh, Mortaza}, title = {Investigating the Influence of Biochar Catalyst in the Pyrolysis Process of Waste Tire to Produce Fuel}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {41}, number = {1}, pages = {117-130}, year = {2022}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In this research, the pyrolysis of waste in the tires has been investigated in the vicinity of biochar catalysts that are produced by the gasification process of poplar. For this aim, 25 grams of sample were loaded in a laboratory-sized reactor and pyrolysis of the samples was carried out at 500°C at atmospheric pressure. The results showed that the biochar catalyst can change the characteristics of the products produced. In the case of gaseous products, the catalyst had no significant effect on the amount of CO, CO2, and H2. However, it increased C3H8 and decreased C2H6 contents. Biochar catalysts reduced the content of aromatics while increasing the linear compounds, indicating the tendency of biochar catalysts to convert aromatics into linear compounds such as alkanes and alkenes. It also had a strong tendency for the deoxygenation of the tar. By using biochar as a catalyst, the char obtained included high content of aromatics. The DTG analysis of the char samples showed that the char molecular structure of the catalytic pyrolysis process is heavier and tidier. XRD analysis of the catalyst also showed that a layer of carbon material (coke) was sitting on the catalyst surface, which was resulting from the polymerization of aromatic compounds present in the volatiles produced in the pyrolysis process.}, keywords = {Waste Tire,Pyrolysis,catalyst,biochar}, title_fa = {بررسی اثر کاتالیست بیوچار در فرایند پیرولیز تایر فرسوده برای تولید سوخت}, abstract_fa = {در این پژوهش پیرولیز لاستیک‏ های فرسوده در مجاورت کاتالیست بیوچار تولیدی از فرایند گازسازی چوب صنوبر بررسی شده است. بدین منظور، در یک راکتور با اندازه‌های آزمایشگاهی، 25 گرم از نمونه بارگذاری شد و پیرولیز نمونه‌ها در دمای C° 500 و در فشار اتمسفریک انجام پذیرفت. نتیجه‌ها نشان داد که کاتالیست بیوچار تأثیر محسوسی بر بازده فراورده‌های به دست آمده از پیرولیز نداشته است ولی مشخصه‌های فراورده‌های تولیدی را تغییر داده است. در مورد فراورده‌های گازی میزان C3H8 را افزایش و میزان C2H6 را کاهش داده است ولی تأثیر محسوسی بر میزان CO، CO2 و H2 نداشته است. کاتالیست بیوچار میزان آروماتیک‏ ها را کاهش و ترکیب‌های خطی را در تار افزایش داده است که نشان از تمایل کاتالیست بیوچار برای فرایند تبدیل آروماتیک ‏ها به ترکیب‌های خطی مانند آلکان‌ها و آلکن‏ ها بوده است. همچنین بیوچار تمایل زیادی برای اکسیژن‏زدایی از تار را داشت. چار تولیدی دارای آروماتیک بیش­تری بوده است. آنالیز DTG نشان دادکه چار به دست آمده از فرایند پیرولیز کاتالیستی شبکه مولکولی سنگین‏ تر و منظم‏ تری داشته است. همچنین آنالیز XRD کاتالیست نشان داد که لایه ای  از مواد کربنی (کک) که به علت فرایند پلیمریزاسیون ترکیب‌های آروماتیکی موجود در بخارهای تولید شده در فرایند پیرولیز است، بر روی کاتالیست نشسته بوده است.}, keywords_fa = {Waste Tire,Pyrolysis,catalyst,biochar}, url = {https://www.nsmsi.ir/article_39957.html}, eprint = {https://www.nsmsi.ir/article_39957_74865b8431b023e9f775f04a3aa0940f.pdf} }