@article { author = {Anbia,, Mansour and Eshraghi, Faezeh}, title = {Synthesis and Characterization of CNT@MOF-199 for Enhancement of CO2 Adsorption}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {38}, number = {1}, pages = {45-53}, year = {2019}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In this work, the MOF-199 and CNT@MOF-199 hybrid composite were synthesized. Synthesized adsorbents were characterized by Brunauer-Emmet-Teller (BET), X-Ray Diffraction (XRD), Fourier Transform InfraRed (FT-IR), Thermo Gravimetric Analysis (TGA), and Scanning Electron Microscopy (SEM) analysis. These adsorbents confirmed with the mentioned methods. Some of the more important parameters such as time of dispersion material and the effect of acid concentration were optimized. The concentration of acids highly affected the percentage of functionalization of MWCNTs. CO2 adsorption capacity was measured by volumetric measurements at 298 K and different pressures. CO2 adsorption capacity increased (from 5.8 to 9 mmol/g) at 298 K and 15 bar. The enhancement in the CO2 adsorption capacity of CNT@ MOF-199 was attributed to the increase of micropore volume of MOF-199 by MWCNT incorporation.}, keywords = {Carbon dioxide,Adsorb,Metal-organic framework,Multiwall Carbon Nanotubes}, title_fa = {سنتز و شناسایی CNT@MOF-199 به منظور افزایش جذب گاز CO2}, abstract_fa = {در مطالعه پیش رو، شبکه های فلزی آلی MOF-199 و کامپوزیت هیبریدی CNT@MOF-199 سنتز شد. جاذب های سنتز شده با روش های شناسایی معمول مانند فناوری جذب و اجذب نیتروژن(BET)، پراش پرتو ایکس (XRD)، اسپکتروسکوپی فروسرخ تبدیل فوریه (FT-IR) و میکروسکوپ الکترونی روبشی (SEM) بررسی و سنتز ترکیبات موردنظر تأیید شد. شبکه های فلزی آلی MOF-199 با ده درصد وزنی نانولوله های کربنی چند دیواره هیبرید شد. برخی پارامترهای مهم مانند زمان دیسپرس شدن پیش ماده­ های کامپوزیت و همچنین غلظت اسیدها در مرحله کربوکسیله کردن نانولوله های کربنی بهینه شد. میزان جذب سطحی CO2 بر روی جاذب­ های سنتز شده به روش حجم سنجی اندازه گیری شد. حجم حفره های میکرو پروس بدون تغییر در ساختار شبکه پس از افزوده شدن MWCNT به MOF-199 افزایش یافت که همین امر سبب بهبود میزان جذب از 6/5 به 54/8 میلی­ مول بر گرم شد.}, keywords_fa = {CO2,جذب سطحی,شبکه فلزی آلی,نانولوله‌های کربنی چند دیواره}, url = {https://www.nsmsi.ir/article_40320.html}, eprint = {https://www.nsmsi.ir/article_40320_3e5f5fc57ac1dd2906ac21b1a64e963b.pdf} }