@article { author = {Saghafi, Reza and Yekrang, Javad}, title = {Investigation the effect of Injection Pressure of the Hypochlorite sodium on Mechanical and Permeability Properties of the Polysulfone Hollow Fibrous Membranes}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {41}, number = {2}, pages = {173-182}, year = {2022}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {Recently, the high pressure injection technique has been introduced for hypochlorite treatment of hollow fibrous membranes. In this process, the hypochlorite solution is injected into the channels of fibers at a high pressure. Literatures show that this technique is more efficient than conventional methods of hypochlorite treatment. In this study, the effects of injection pressure (in the range of 10-30 psig) on the mechanical, pore sizes and hydraulic permeability of the polysulfone (PSf) hollow fibrous membranes have been investigated. The pore sizes and pore structures were analyzed by atomic force microscope (AFM) and scanning electron microscope (SEM) images. Results showed that the pore sizes and hydraulic permeability of the hollow fibers are increased with increase in injection pressure of sodium hypochlorite. On the contrary, the mechanical properties of the membranes dropped after an increase in injection pressure from 10 to 30 psig. This decrement could have been occurred due to removal of the polyvinyl pyrrolidone (PVP) from the polymer matrix of the PSf hollow fibers. These results can be useful for control and adjustment of the process parameters of hypochlorite treatment of the hollow fibrous membranes.}, keywords = {Hypochlorite treatment,Hollow fibers,Polysulfone (PSf),Injection pressure,Hydraulic permeability}, title_fa = {بررسی تأثیر تغییر فشار در تکمیل ترزیقی سدیم هیپوکلریت بر ویژگی‌های مکانیکی و تراوایی غشای الیاف توخالی پلی سولفون}, abstract_fa = {به تازگی عملیات تکمیل تزریق درونی سدیم هیپوکلریت به درون غشاهای توخالی معرفی شده است. در عملیات تکمیل تزریق درونی سدیم هیپوکلریت، محلول سدیم هیپوکلریت توسط یک پمپ با فشاری مشخص و در یک بازه زمانی تعیین شده به درون کانال الیاف توخالی از یک سو تزریق شده و از سوی دیگر خارج می ­شود. نتیجه ­های پژوهش ­های انجام شده نشان داده است که تکمیل تزریق درونی سدیم هیپوکلریت یک تکمیل نوین و با توانایی بسیار بالا در مقایسه با نوع سنتی آن می‌باشد. در این پژوهش تأثیر تغییرهای فشار اعمالی در تزریق تکمیل سدیم هیپوکلریت در بازه­ psig 10-30 بر ویژگی­ های مکانیکی، اندازه روزنه ­ها و تراوایی هیدرولیکی غشاهای الیاف توخالی پلی سولفون تولیدی مورد مطالعه قرار گرفت. برای تخمین اندازه روزنه‌های غشاهای الیاف توخالی از روش پردازش تصویرهای عکس­ های میکروسکوپ الکترونی روبشی و میکروسکوپ نیروی اتمی (AFM) استفاده شد. نتیجه­ ها بیانگر افزایش محسوس اندازه روزنه­ ها و تراوایی هیدرولیکی غشاهای الیاف توخالی تولید با افزایش فشار تزریق محلول سدیم هیپوکلریت در بازه­  psig 10-30 می ­باشد. همچنین با افزایش فشار تزریق محلول سدیم هیپوکلریت افت ویژگی­ های مکانیکی غشاهای الیاف توخالی تکمیلی محسوس می ­باشد که این امر به دست آمده از حذف بیش­تر پلی وینیل پیرولیدون (PVP) از ماتریس پلیمری غشاهای الیاف توخالی تکمیل شده می ­باشد.}, keywords_fa = {Hypochlorite treatment,Hollow fibers,Polysulfone (PSf),Injection pressure,Hydraulic permeability}, url = {https://www.nsmsi.ir/article_44325.html}, eprint = {https://www.nsmsi.ir/article_44325_ebdc542c77620befe0c4256bde74af64.pdf} }