@article { author = {Parnian, Mohammad Javad and Mortazavi, Yadollah and Taheri Najafabadi, Ali and Khodadadi, Abbas Ali}, title = {Chemical Vapor Deposition of Ruthenium Nano Layer on Co/Al2O3 Catalyst for Fischer-Tropsch Synthesis Using Ru3(CO)12 Precursor}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {32}, number = {4}, pages = {17-32}, year = {2013}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In present investigation, ruthenium was deposited on cobalt supported alumina catalyst by Chemical Vapor Deposition (CVD) of Ru3(CO)12 for Fischer-Tropsch Synthesis (FTS). The 15.0 wt% Co/γ-Al2O3 catalyst was prepared by wet impregnation of cobalt nitrate aqueous solution, and then dried and calcined at 400oC for 4 h. To optimize the CVD operating conditions in which Ru3(CO)12 starts to decompose on surface of the catalyst, the decomposition products of the CVD processwere passed through a gas cell of FT-IR. In a specific temperature range, ruthenium deposited selectively on the surface of cobalt active phase.The CVD of ruthenium onto Co/γ-Al2O3 catalyst increased the catalyst reducibility which in turnled to a higher CO hydrogenation activity in FTS process. Furthermore, the promoted cobalt catalyst showed a better selectivity towards heavy hydrocarbons than the reference unpromoted catalyst. The effects of temperature (210oC-240oC) and H2/CO ratio (1-3) for all catalysts were examined. For the all operating conditions, the promoted catalyst performed much better than the unpromoted catalyst.}, keywords = {Chemical vapor deposition,Fischer-Tropsch synthesis,Ruthenium,Cobalt,Ru3(CO)12,Promoter}, title_fa = {استفاده از روش ترسیب شیمیایی فاز بخار برای لایه نشانی روتنیوم از پیش ماده 12(CO)3Ru بر روی کاتالیست 3O2Co/Al و بررسی عملکرد کاتالیست در واکنش فیشر تروپش}, abstract_fa = {در این پژوهش ارتقادهنده ‌ی روتنیوم با روش ترسیب شیمیایی فاز بخار به کاتالیست کبالت بر پایه ‌ی آلومینا افزوده شد. کاتالیست‌ها‌ دارای 15% وزنی کبالت بوده و به روش تلقیح تر ساخته شده ‌اند. پیش ماده تری‌روتنیوم ‌دودکا‌کربونیل (Ru3(CO)12) برای این فرایند استفاده شد. برای بهینه نمودن فرایند ترسیب شیمیایی فاز بخار شرایط انجام این فرایند به طور کامل توسط IR و TGA بررسی شد و دمای مناسب برای ترسیب روتنیوم روی کاتالیست کبالت بر پایه‌ آلومینا انتخاب شد. در اثر افزودن ارتقادهنده، احیا‌پذیری کاتالیست بهبود یافت که این موضوع با افزایش درصد تبدیل CO در واکنش فیشر تروپش تأیید شد. واکنش فیشر تروپش در دماهای 240-210 درجه سلسیوس و نسبت خوراک 3و 2و1=H2/CO صورت گرفت. نمونه‌ ارتقاداده شده، گزینش ‌پذیری برای فراورده ‌های سنگین هیدروکربنی را نسبت به کاتالیست مرجع بهبود داد. همچنین در تمام دماها و نسبت‌های خوراک گوناگون، عملکرد کاتالیست‌ ارتقا داده شده از کاتالیست مرجع بدون ارتقا دهنده بهتر بود.}, keywords_fa = {روش ترسیب شیمیایی فاز بخار,فرایند واکنش فیشر تروپش,کاتالیست کبالت,ارتقادهنده‌ی روتنیوم,تری روتنیوم دودکا کربونیل}, url = {https://www.nsmsi.ir/article_5548.html}, eprint = {https://www.nsmsi.ir/article_5548_98ac97dba215c2df7017e3cc61998d3e.pdf} }