@article { author = {Ardjmand, Mehdi and Alhoseini, Seyed Hasan and Seyedin, Seyed Hadi}, title = {Experimental Investigation of Coating Process of Sodium Percarbonate Powder by Sodium Silicate in Fluidized Bed}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {32}, number = {4}, pages = {45-58}, year = {2013}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In this paper, particles coating system in fluid bed have been studied. This system includes two process of coating and drying in the bed and used for coating of sodium per carbonate particles by liquid sodium silicate. This is a top spray coating system and batch type. Response Surface Method (RSM) was applied for experiment design by means of Minitab software, version 15. The fluidization hydrodynamics of particles and air flow was studied. The optimum operating conditions was determined. The effect of particles fluidization height, air and liquid flow rates on coating efficiency was investigated. The experimental results showed that, the mass of particles coating, was proportional to the liquid value and indirectly to the air flow rates. Experimental correlation of coating mass is proportional with fluidized air and liquid flow rates and atomization air flow. Also RSM tables and contours for process optimization, for investigation of system performance were derived. The result of fluidized height of particles based on time and coating mass with different air and liquid flow rates for the best case of particles coating was calculated and investigated and optimized coating information was obtained.}, keywords = {Coating,Particles,Granulation,Fluid bed,Two-fluid nozzle,Experiment design,Optimization}, title_fa = {بررسی آزمایشگاهی فرایند پوشش‌دهی پودر سدیم پرکربنات با محلول سدیم سیلیکات در بستر سیال}, abstract_fa = {:در این مقاله سامانه پوشش ‌دهی ذره‌ها در بستر سیال، مطالعه شده است. سامانه بستر سیال مورد مطالعه، شامل دو مرحله، پوشش و خشک شدن در بستر است، و برای پوشش دهی ذره ‌های سدیم پرکربنات از سدیم سیلیکات ، استفاده شده است. این سامانه از نوع ناپیوسته و نوع پوشش دهی پاشش از بالا است. برای کاهش تعداد آزمایش ها و بررسی بهتر نتیجه‌ ها، طرح آزمایش به روش پاسخ سطح (RSM) انجام شد و از نرم افزار Minitab نسخه 15 استفاده شد. در آزمایش ها، الگوی شناوری ذره‌ها و جریان هوا و مایع، مورد بررسی قرار گرفت.نتیجه ‌های آزمایش نشان داد، که مقدار پوشش متناسب با شدت جریان مایع بوده و نسبت وارون با شدت جریان هوا دارد.معادله تجربی جرم پوشش روی ذره، بر حسب متغیرهای شدت جریان هوای سیال ساز، شدت جریان مایع، شدت جریان هوای افشان کننده و نیز جدول‌ها و نمودارهای غربالیRSM برای بهینه سازی فرایند و بررسی عملکرد سامانه، به ‌دست آمد. نتیجه ‌هایی مانند ارتفاع شناورسازی ذره‌ها با زمان، محاسبه جرم پوشش با شدت جریان‌های گوناگون هوا و مایع، نمودارها و نمودارهای غربالی برای تأثیر متغیرهای شدت جریان هوای شناورسازی، شدت جریان هوای افشان کننده و شدت جریان مایع، برای بهترین حالت در پوشش دهی ذره‌ها، به دست آمده و مورد بررسی قرار گرفت.}, keywords_fa = {پوشش دهی,ذره‌ها,گرانول سازی,بستر سیال,نازل دو سیاله,طرح آزمایش,بهینه سازی}, url = {https://www.nsmsi.ir/article_5554.html}, eprint = {https://www.nsmsi.ir/article_5554_3b63d5437832d14e9a68f00e235e3225.pdf} }