@article { author = {Goudarzi, Koorosh}, title = {New Method of Odorant Injecting at Gas Pressure Reducing Station Based on Bypass Method Using Ejector}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {42}, number = {3}, pages = {351-358}, year = {2023}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {With the existence of several natural gas perfuming systems, such as the bypass system and the injection system, for some reasons including the problems and limitations of the existing systems, it seems necessary to introduce a new perfuming system with less limitations. Currently, in the gas distribution system in the country, only the above two systems are used for gas aromatization. Since the injection system has a high maintenance cost and also the bypass system is limited to low capacities, it is very necessary to introduce a new system to aromatize the consumed natural gas. In this article, a new gas perfumer system has been introduced. The desired system is created by combining an ejector with a bypass system. In this article, the modeling of the combined system under study has been done and the effect of important parameters such as gas pressure (gas pressure in the upstream), mass flow rate of the odorant, gas temperature (temperature in the upstream), nozzle diameter and number of nozzles are also on the amount The compressed gas has been carried out to enter the mercaptan tank and absorb the required amount of fragrance according to the conditions. The results show that the diameter of the nozzle and the number of nozzles have no effect on the mass rate of gas flow required for the fragrance system. But the gas mass flow rate required for the aromatizer system is affected by the gas pressure and gas temperature upstream of the aromatizer system}, keywords = {Natural gas,gas odorizing process,bypass system,Ejector}, title_fa = {روش جدید تزریق ماده بودار کننده در ایستگاه تقلیل فشار گاز بر پایه روش کنارگذر با استفاده از اجکتور}, abstract_fa = {با وجود چندین سیستم بودارکننده گاز طبیعی مصرفی، مانند سیستم کنارگذر و سیستم تزریقی، به دلایلی از جمله مشکلات و محدودیت های سیستم های موجود، معرفی سیستم بودار کننده جدید با محدودیت های کمتر ضروری به نظر می رسد. در حال حاضر، در سیستم توزیع گاز در سطح کشور تنها از دو سیستم فوق برای بودار کردن گاز استفاده می شود. از آنجا که سیستم تزریقی از هزینه بالای تعمیر و نگهداری برخوردار است و همچنین سیستم کنارگذر نیز محدود به ظرفیت های پایین است، معرفی یک سیستم جدید برای بودار کردن گاز طبیعی مصرفی بسیار ضروری است. در این مقاله به معرفی یک سیستم جدید بودار کننده گاز پرداخته شده است. سیستم مورد نظر با ترکیب یک اجکتور با سیستم کنارگذر بوجود آمده است. در این مقاله، مدلسازی سیستم ترکیبی مورد مطالعه انجام گرفته و تاثیر پارامترهای مهم مانند فشار گاز زیرکش شده (فشار گاز در بالادست)، دبی جرمی ماده بودارکننده، دمای گاز زیرکش شده (دما در بالادست)، قطر نازل و تعداد نازل نیز بر روی میزان گاز زیرکش شده جهت ورود به مخزن مرکاپتان و جذب مقدار مورد نیاز از ماده بودارکننده متناسب با شرایط، انجام گرفته است. نتایج نشان می دهد که قطر نازل و تعداد نازل تاثیری بر روی نرخ جرمی جریان گاز مورد نیاز برای سیستم بودارکننده ندارد. اما نرخ جرمی جریان گاز مورد نیاز برای سیستم بودارکننده متاثر از فشار گاز و دمای گاز در بالادست سیستم بودارکننده است.}, keywords_fa = {Natural gas,gas odorizing process,bypass system,Ejector}, url = {https://www.nsmsi.ir/article_701079.html}, eprint = {https://www.nsmsi.ir/article_701079_c530c4c227c527c6065111ebaff381e3.pdf} }