@article { author = {Banihashemi, Sayed Fatemeh and Ahmadpour, Ali and Pakizeh, Majid and Pourafsharichenar, Mahdi}, title = {Synthesis of Silicalite-1 Nanoparticles and Investigating the Effect of Seeding Steps on the Seeded Supports in Order to Prepare High Quality Zeolite Membrane}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {31}, number = {1}, pages = {1-11}, year = {2012}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In the present investigation, nanosized silicalite-1 powder was first synthesized as a seed with mean diameter of 40 nm by the hydrothermal method. Seeding of nanosized zeolite crystals on the support surface is one of key steps in the secondary growth synthesis method. Therefore, in order to increase the quality of the zeolite membrane, subsequent seeding steps were investigated by dip-coating technique. The seeded supports and silicalite-1 nanoparticles were characterized by X-Ray Diffraction (XRD), Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), N2-BET adsorption/desorption isotherm,Fourier Transform Infrared Spectroscopy (FT-IR), Thermo Gravimetric Analysis (TGA) and Differential Scanning Calorimeter (DSC). Examination of the number of seeding steps showed that three subsequent seeding steps would improve the quality of seed layer.}, keywords = {Nanosilicalite-1,Secondary growth,Seeding,Dip-Coating,Characterization}, title_fa = {سنتز نانو ذره های سیلیکالیت-1 و بررسی تأثیر تعداد مرحله های جوانه‌نشانی روی پایه‌های جوانه‌نشانی شده برای ساخت غشای زئولیتی با کیفیت بالا}, abstract_fa = {در این پژوهش، ابتدا نانو ذره ‌های سیلیکالیت-1 با اندازه متوسط 40 نانومتر به روش هیدروترمال برای جوانه‌نشانی سنتز شدند. با توجه به اینکه جوانه‌نشانی بلور‌های زئولیت بر روی سطح پایه یکی از گام‌های کلیدی در سنتز غشاهای زئولیتی به روش رشد ثانویه محسوب می‌شود، تعداد مرحله ‌های جوانه‌نشانی پایه به روش پوشش عمقی به منظور بالا بردن کیفیت غشاء مورد ارزیابی دقیق قرار گرفت. آزمایش‌های تعیین ویژگی‌ها شامل تجزیه ‌های طیف پراش اشعه ایکس (XRD) ، میکروسکوپ الکترونی روبشی (SEM)، میکروسکوپ الکترونی بوری(TEM)،ایزوترم جذب و دفع نیتروژن، طیف سنجی مادون قرمز (FT-IR)، وزن سنجی حرارتی (TGA) و گرماسنجی روبشی تفاضلی(DSC)بر روی نانو ذره‌های سنتز شده و پایه‌های جوانه‌نشانی شده صورت گرفت.بررسی تأثیر تعداد مرحله ‌های جوانه‌نشانی بر روی پایه آلومینا نشان داد که تکرار سه مرحله جوانه‌نشانی بهترین پوشش رابر روی پایه ایجاد می ‌کند.  }, keywords_fa = {نانو سیلیکالیت-1,رشد ثانویه,جوانه نشانی,پوشش عمقی,تعیین ویژگی ها}, url = {https://www.nsmsi.ir/article_7123.html}, eprint = {https://www.nsmsi.ir/article_7123_29bc90c8bf73aa9fbfe6e5ee7fd1f9d6.pdf} }