@article { author = {Hamzeh, Yahya and Kamarei, Masoud and Mahdavi, Saeid and Azadfallah, Mohammad and Hedjazi, Sahab and Hashemi Najafi, Sayed Mohammad}, title = {Improving CMP Pulping Process of Eucalyptus by Using of Surfactants}, journal = {Nashrieh Shimi va Mohandesi Shimi Iran}, volume = {30}, number = {3}, pages = {77-83}, year = {2011}, publisher = {Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR}, issn = {1022-7768}, eissn = {}, doi = {}, abstract = {In this research the effect of three non-ionic surfactants named PEG-1000, KELA-2 and KECA-20 at four levels of 1, 2, 3 and 4 % on CMP pulping of Eucalyptus Camaldulensis, oxidative bleaching of selected pulps and strength of handsheet papers were investigated.The resulting pulps with higher screen yield and lower reject from application of each surfactant as well as the reference CMP pulps (without surfactant) were selected and bleached in two stages with H2O2. The pulping results showed that application of KECA-20 at the level of 1% increased accepted yield by about 2.5%. KECA-20 (1%) and PEG-1000 (4%) at the level of 1% lowered the consumption of bleaching agents and increased brightness and decreased opacity and yellowness of pulp. In addition, application of surfactants increased strength of handsheet papers compared to the paper obtained from the reference CMP pulp.}, keywords = {Eucalyptus,CMP Pulping,surfactant,Yield,Optical Properties,Paper strengths}, title_fa = {بهبود فرایند تهیة خمیر کاغذ شیمیایی ـ مکانیکی اکالیپتوس با استفاده از سورفکتانت‌ها}, abstract_fa = {در این پژوهش اثر افزودن سه نوع سورفکتانت غیریونی با نام‌های تجاری PEG-1000، KELA-2 و KECA-20 در چهار سطح 1%، 2%، 3% و 4%به‌عنوان افزودنی فرایند خمیرسازی CMP بر ویژگی‌های خمیرکاغذ CMP به ‌دست آمده از اکالیپتوس کاملدولنسیس، رنگبری اکسایشی خمیر و ویژگی‌های کاغذ دست‌ساز مورد بررسی قرار گرفت. خمیرکاغذهای دارای بیشترین بازده و کمترین وازده به دست آمده از سورفکتانت‌ها به‌همراه پخت شاهد (بدون سورفکتانت) انتخاب و طی دو مرحله با هیدروژن پراکسید رنگبری شدند. نتیجه ‌های تهیه خمیرکاغذ نشان داد که KECA-20 در سطح کاربرد 1 درصد موجب افزایش بازده خمیرسازی به مقدار 5 /2 درصد شد. سورفکتانت KECA-20 در سطح کاربرد 1 درصد وPEG-1000 در سطح کاربرد 4 درصد منجر به افزایش بازده بعد از الک، کاهش مصرف هیدروژن پراکسید در رنگبری، افزایش روشنی و کاهش ماتی و زردی کاغذهای به دست آمده شدند. همچنین کاغذهای به دست آمده از افزودن همة سورفکتانت‌ها نسبت به کاغذهای شاهد از ویژگی‌های مقاومتی بهتری برخوردار بودند.}, keywords_fa = {اکالیپتوس,خمیرکاغذسازی CMP,سورفکتانت,بازده,ویژگی های نوری,مقاومت‌های کاغذ}, url = {https://www.nsmsi.ir/article_7497.html}, eprint = {https://www.nsmsi.ir/article_7497_91fced732f218dbdb433c67445e247a8.pdf} }