TY - JOUR
ID - 25832
TI - Numerical Study of the Influence of Geometric Factors on Heat Transfer Using Water-Al2O3 Nanofluid in the Microchannels
JO - Nashrieh Shimi va Mohandesi Shimi Iran
JA - NSMSI
LA - en
SN - 1022-7768
AU - Karimi, Hajir
AU - Sabzehmeidani, Mohammad Mehdi
AD - Department of Chemical Engineering, Yasouj University, Yasouj, I.R. IRAN
Y1 - 2017
PY - 2017
VL - 35
IS - 4
SP - 137
EP - 150
KW - Microchannel
KW - Computational fluid dynamics
KW - Heat Transfer
KW - nanofluid
KW - Nussel
DO -
N2 - In this study, the heat transfer and fluid flow, water-Al2O3nanofluid in a microchannel, two-dimensional rectangular in volume fractions 2%, 4%, 6% and 8% nanoparticles and Reynolds number from 10 to 50 using Computational Fluid Dynamics (CFD) has been investigated. The governing equations of continuity and momentum and thermal are solved by finite element method and by applying boundary conditions by using COMSOL Multiphysics 5.0 software. Simulation results have shown, the local Nusselt number water-Al2O3nanofluid in Reynolds number 6.9 and volume fractions 5% is a good agreement with experimental data. Increasing the Reynolds number leads to increases fluid velocity and increase the density of streamlines in the edge of the baffle and the creation of larger vortex flow that increases the heat transfer coefficient. By increasing the number of baffles leads to the formation of the recirculation zone, which increased outlet temperatures due to better heat exchange fluid to the walls of the microchannel. So that the output of fluid temperature in Reynolds number 40 in the microchannel six baffle and in the microchannel one baffle is 322.35 K and 314.9 K, respectively. By increasing the height of baffle, increase recirculation zone and then increase the heat transfer coefficient. In six baffle microchannel for Reynolds number 50, the value of pressure drop and the nusselt number is found to be 15 and 28 higher when compared with that Reynolds number in 10, respectively. But also the average output temperature is increased by increasing nanoparticle volume fractions and viscosity affected by size zone. For one baffle microchannel by rising nanoparticle volume fractions from 0.02 to 0.1, the temperature (K) enhancing 0.56 % percent. But the effect of the distance between the baffles, the average temperature of the microchannel output is low.
UR - https://www.nsmsi.ir/article_25832.html
L1 - https://www.nsmsi.ir/article_25832_10d5402c9478814d9cbe23a6404012de.pdf
ER -