Nashrieh Shimi va Mohandesi Shimi Iran

Nashrieh Shimi va Mohandesi Shimi Iran

Biofouling Protection for Marine Environmental Sensors

Document Type : Review Article

Authors
Mojtaba Khani
Ali Bahrami
Vahid Momeni
Biological Science and Technology Department, Malek-Ashtar University of Technology, Tehran, I.R. IRAN
Abstract
Biofouling is a process in which microorganisms grow and proliferate on the surface. Biofouling is a problem made by biofilm. This kind of fouling occurs in a wide range of industrial process and causes problems for the high-priced process, in particular. In different industries, it has been worked out to deal with this issue, separately. In all of them, the main problem is the biofilm formation. These days, many marine autonomous environment monitoring networks are set up in the world. Owing to the intense technological development of in situ autonomous monitoring systems, the biofouling problem for such systems has been a technological one which needed to be solved. Consequently, such systems without efficient biofouling protection are hopeless. Localized electro-chlorination biofouling protection is actually a promising and an advanced solution for in situ oceanographic sensors since many successful in situ results have been obtained and sensor manufacturers can integrate into their instruments a compact, simple, robust and low energy requiring a solution. This protection must be applied to the sensors and to the underwater communication equipment based on acoustic technologies. This paper presents the results obtained in the laboratory and at sea, with various instruments, protected by a localized chlorine generation system.
Keywords
Biofouling
Sensors
Protection methods
Localised chlorine

Subjects

[1] Dumée L.F., He L., King P.C., Moing M.L., Güller I., Duke M., Hodgson P.D., Gray S., Poole A.J., Kong L., Towards Integrated Anti-Microbial Capabilities: Novel Biofouling Resistant Membranes by High Velocity Embedment of Silver Particles, J. Membr. Sci., 47(5): 552-561 (2015).
[2] Al-Juboori R.A., Yusaf T., Biofouling in RO System: Mechanisms, Monitoring and Controlling, Desalination, 30(2): 1-23 (2012).
[3] Verran J., Whitehead K., Factors Affecting Microbial Adhesion to Stainless Steel and other Materials Used in Medical Devices, Int. J. Art Organs, 28 (11): 1138-1145 (2005).
[4] Khani M., Bahrami A., Ghafari M.D., Optimization of Operating Parameters for Anti-Corrosive Biopolymer Production by Chryseobacterium Indologenes MUT. 2 Using Central Composite Design Methodology, Journal of the Taiwan Institute of Chemical Engineers, 30(5): 165-172 (2015).
[5] Creber S.A., Pintelon T.R.R., Graf Von Der Schulenburg D.A.W., Vrouwenvelder J.S., Van Loosdrecht M.C.M., Johns M.L., Magnetic Resonance Imaging and 3D Simulation Studies of Biofilm Accumulation and Cleaning on Reverse Osmosis Membranes, Food Bioprod. Process., 88: 401-408 (2010).
[6] Khani M., Bahrami A., Momeni V., Microbial Corrosion and Methods to Prevent and Control it Using Coatings and Biological Factors, Journal of Studies in Color World, 4(3): 3-20 (2015).
[7] Bahrami A., Momeni V., Khani M., The Effect of Surface Properties on Biofilm Formation and how to Prevent BioFouling, Journal of Studies in Color World, 4(3): 3-11 (2014).
[8] Donlan R., Costerton W., Biofilms: Survival Mechanisms of Clinically Relevant Microorganisms, Clin. Micro. Rev., 15: 167-193 (2002).
[9] Flemming H-C, Neu TR, Wozniak D, The EPS Matrix: the House of Biofilm Cells, J. Bacteriol., 189: 7945-7947 (2007).
[10] Hausner M, Wuertz S, High Rates of Conjugation in Bacterial Biofilms as Determined by Quantitative in-Situ Analysis, Appl. Environ. Microbiol., 65: 3710-3713 (1999).
[11] Körstgens V., Wingender J., Flemming H.C., Borchard W., Influence of Calcium ion Concentration on the Mechanical Properties of a Model Biofilm of Pseudomonas Aeruginosa, Water Sci. Technol., 43: 49-57 (2001).
[12] Lewis K., Riddle of Biofilm Resistance, Antimicrob Agents Chemother 45: 999-1007 (2001).
[13] Mayer C., Moritz R., Kirschner C., Borchard W., Maibaum R., Wingender J., Flemming H.C., The Role of Intermolecular Interactions: Studies on Model Systems for Bacterial Biofilms,
Int. J. Biol. Macromol, 26: 3-16 (1999).
[14] Lehtola M.J., Miettinen I.T., Martikainen P.J., Biofilm Formation in Drinking Water Affected by Low Concentrations of Phosphorus, Can. J. Microbiol., 48: 494-499 (2002).
[15] Verran J., Jones M., In: Walker J., Surmann S., Jass J., Problems of Biofilms in the Food and Beverage Industry Industrial Biofouling Detection, Prevention and Control, Wiley Chichester, 32(6): pp. 145–173 (2000).
[16] Jafari Nasr, M., Balaei, A. Analysis of Fouling in HVAC Heat Exchangers by CFD, Iran. Chem. Chem. Eng. (IJCCE), 34(3): 51-60 (2015).
[17] Marvaldi J., Coail Y., Legrand J. ROSE, “CMM’06 Caractérisation du Milieu Marin”, 16-19 Seatech Week 2006 - Brest –Franc. (2006).
[18] Sarrazin J., Blandin J., Delauney L., TEMPO: “A New Ecological Module for Studying Deep-Sea Community Dynamics at Hydrothermal Vents”, IEEE catalogue no. 07 EX, Oceans 2007 IEEE Conference Proceedings, Aberdeen, Scotland, (2007).
[19] Delauney L., LeGuen Y., “Calibration Procedure for In-Situ Marine Fluorometer, In: International Metrology Conference 2003 Proceedings”, CD Publisher: Collège Français de métrologie. Toulon, France. (2003).
[20] Lehaitre M., Delauney L., Compère C., “Oceanographic Methodology series, Real Time Coastal Observing Systems for Marine Ecosystem Dynamics and Harmful Algal Blooms: Theory, Instrumentation and Modelling”, UNESCO Publishing, (2008).
[21] Delauney L., Cowie P., “Biofouling Resistant Infrastructure for Measuring, Observing and Monitoring”, Report Project no. BRIMOM EVR1-CT-2002-40023 (2002).
[22] Manov D.V., Chang G.C., Dickey T.D., Methods for Reducing Biofouling on Moored Optical Sensors, J. Atmos. Ocean. Technol., 21 (6): 958-968 (2004).
[23] Delauney L., Compère C., “Biofouling Protection for Marine Environmental Optical Sensors, International Conference on Recent Advances in Marine Antifouling Technology (RAMAT), Chennai (Madras), India. Proceedings of the International Conference on Recent Advances in Marine Antifouling Technology”, Allied Publishers Pvt. Ltd. (2006).
[24] Satpathy K.K., “Biofouling and Its Control in Power Plants Cooling Water System. International Conference on Recent Advances in Marine Antifouling Technology (RAMAT)”, Chennai (Madras), India. Proceedings of the International Conference on Recent Advances in Marine Antifouling Technology, Allied Publishers Pvt. Ltd. (2006).
[25] Delauney L., Lepage V., Festy D., “Biofouling Resistant Infrastructure for Measuring, Observing and Monitoring” Report Project no. BRIMOM EVR1-CT-2002-400 23 (2002).
[26] Aminot A., Kerouel R., “Hydrologie Des écosystèmes Marins, Paramètres et Analyses, Mesure de la Concentration en Oxygène Dissous”,  INRA Edition. F-78026 Versailles France. Chap. VII. 32(6): 92-118 (2004).
[27] Fofonoff N.P., Millard R.C., “Algorithms for Computation of Fundamental Properties of Seawater”, UNESCO Technical Papers in Marine Science, 44, UNESCO Division of Marine Science, Paris, France, 53 :45-58 (1983).
[28] Blain S., Guillou J., Tréguer P., Woerther P., Delauney L., High Frequency monitoring of the Coastal Marine Environment Using the MAREL Buoy, J. Environ Monit, 6: 569-575 (2004).