Nashrieh Shimi va Mohandesi Shimi Iran

Nashrieh Shimi va Mohandesi Shimi Iran

Fabrication and Performance Investigation of Improved Nanocomposite Polyphenylsulfone membranes by Fe3O4 Modified Montmorillonite

Document Type : Research Article

Authors
Mehdi Mahmoudian
Peyman Gozali Balkanloo
Arezoo Abdali
Somayeh Mahmoudi
Nanotechnology Institute, Urmia University, Urmia, I.R. IRAN
Abstract
Improved polyphenylsulfone nanocomposite membrane with iron oxide modified montmorillonite was prepared by mixing this additive with polymer solution by phase inversion method. In this study, the effect of the additive on membrane performance was investigated. For this purpose, the pure water flux, fouling, rejection of dyes and heavy metals were measured by a filtration cell. The hydrophilicity of membranes was studied by measuring the contact angle of water. The dispersion of additive in the polymer matrix, as well as the membrane morphology, was surveyed by FE-SEM analysis. The results obtained from the above experiments showed that the surface hydrophilicity increased after the incorporation of the modified clay. In addition, pure water permeability, salt rejection, and fouling resistance improved dramatically for
the modified membranes.
Keywords
Nanocomposite membranes
Separation
Polyphenylsulfone
Heavy metals

Subjects

[1] Mbareck C. N.Q., Alaoui O.T., Barillier D.و Elaboration, Characterization and Application of Polysulfone and Polyacrylic Acid Blends as Ultrafiltration Membranes for Removal of Some Heavy Metals from Water, J. Hazard Mater., 171:  93-101 (2009).
[2] Sato Y. K.M., Kamei T., Magara Y., Performance of Nanofiltration for Arsenic Removal, Water Res., 36: 3371–3377 (2002).
[3] Sikdar S.K. G.D., Rogut I., Membrane Technologies for Remediating Contaminated Soils: A Critical Review, J. Membr Sci., 151:75-85 (1998).
[4] Peter-Varbanets M. Z.C., Swartz C., Pronk W., Decentralized Systems for Potable Water and the Potential of Membrane Technology, Water Res., 43: 245-265 (2009).
[5] Farrokhnia M. R.S.A., Khanbabaei G., Fabrication and Evaluation of Nanocomposite Membranes of Polyethersulfone/Α-Alumina for Hydrogen Separation, Iran. Polym. J. Catal., 24: 171-183 (2015).
[6] Kumar S., Guria C.M.A., Synthesis, Characterization and Performance Studies of Polysulfone/Bentonite Nanoparticles Mixed-Matrix Ultra-Filtration Membranes using Oil Field Produced Water, Sep. Purif. Technol., 150: 145-158 (2015).
[7] Jahanshahi M, R.A., Mortazavian N Effect of Polydopamine Deposition Conditions on Polysulfone Ultrafiltration Membrane Properties and Threshold Flux During Oil/Water Emulsion Filtration, Polymer, 97: 247–257 (2016).
[8] Madaeni S.S, Ghaemi N., Rajabi H., Advances in Polymeric Membranes for Water Treatment, Adv MembrTechnol Water Treatment, 1: 3-41 (2015).
[9] Dorraji M.S.S., Vatanpour V., Organic-Inorganic Composite Membrane Preparation and Characterization for Biorefining, Membr Technol Biorefinin, 4: 85-102 (2016).
[10] Yavas B.H., Tanriver N., Benli B., Kizilcan N., In Situ Polymerization of Sepiolite Modified Polysulfone, Procedia. Behav. Sci., 195: 2206-2209 (2015).
[11] Felbec T., Bonk A., Kaup G., Mundinger S., Grethe T., Rabe M., Vogt U., Kynast U., Porous nanoclay Polysulfone Composites: A Backbone with High Pore Accessibility for Functional Modifications, Micropor Mesopor. Mat., 234: 107-112 (2016).
[12] Jose AJ., Alagar M., Preparation and Characterization of Polysulfone-Based Nanocomposites, Manu Nanocompos Eng. Plast., 31-59 (2015).
[13] Ionita M., Pandel A., Crica L., Pilan L., Improving the Thermal and Mechanical Properties of Polysulfone by Incorporation of Graphene Oxide, Compos Part. B Eng., 59: 133-139 (2014).
[14] Yin J., Zhu G., Deng B, Multi-Walled Carbon Nanotubes (MWNTs)/Polysulfone (PSU) Mixed Matrix Hollow Fiber Membranes for Enhanced Water Treatment, J. Membr. Sci., 437: 237-248 (2013).
[15] Khalid A., Al-Juhani A.A., Al-Hamouz O.C., Laoui T., Khan Z., Atieh M.A., Preparation and Properties of Nanocomposite Polysulfone/ Multi-Walled Carbon Nanotubes Membranes for Desalination, Desalination, 367: 134-144 (2015).
[16] Sarfraz M., Ba-Shammakh M., Synergistic Effect of Adding Graphene Oxide and ZIF-301 to Polysulfone to Develop High Performance Mixed Matrix Membranes for Selective Carbon Dioxide Separation from Post Combustion Flue Gas, J. Membr. Sci., 514: 35-43 (2016).
[17] Corcione C.E., Freuli F., Maffezzoli A., The Aspect Ratio of Epoxy Matrix Nanocomposites Reinforced with Graphene Stacks, Polym. Eng. Sci., 53: 531-539 (2013).
[18] Daraei P, Madaeni S.S., Salehi E, Ghaemi N, Sadeghi Ghari H., Khadivi MA, Rostami E., Novel Thin Film Composite Membrane Fabricated by Mixed Matrix Nanoclay/Chitosan on PVDF Microfiltration Support: Preparation, Characterization and Performance in Dye Removal, J. Membr. Sci., 436: 97-108 (2013).
[19] Mahmoudian M., Gozali Balkanloo P. Clay-hyperbranched Epoxy/Polyphenylsulfone Nanocomposite Membranes, Iranian Polymer Journal, 26: 1-2 (2017).
[20] Alexandre M., Dubois P., Polymer-Layered Silicate Nanocomposites: Preparation, Properties and Uses of a New Class of Materials, Mater. Sci. Eng., 28: 1-63 (2000).
[21] Sinha Ray S., Okamoto M., Polymer/Layered Silicate Nanocomposites: A Review from Preparation to Processing, Prog. Polym. Sci., 28: 1539-1641 (2003).