Nashrieh Shimi va Mohandesi Shimi Iran

Nashrieh Shimi va Mohandesi Shimi Iran

Preparation of Polyvinyl Chloride-Polyaniline-single walled Carbon Nanotube nanocomposite with improved mechanical properties by response surface method

Document Type : Research Article

Authors
maryam Farbodi
selda khayaty
Department of Chemistry, Tabriz Branch, Islamic Azad University, Tabriz, IR.IRAN
Abstract
In this study, to improve the mechanical properties of polyaniline (PANI) its nanocomposite was prepared using polyaniline and carbon nanotube (CNT) as reinforcing agent. PVC- PANI - CNT nanocomposite was synthesized by mixing CNT with a solution of PVC containing dispersed PANI. Solution casting method was used to prepare PVC- PANI - CNT nanocomposite films. The effect of three factors including carbon nanotube weight percent, drying temperature of the nanocomposite film, sonication time of nanocomposite solution at different levels using the box-Behnken design (response surface method). According to this method, 15 tests were performed. The values for tensile strength of nanocomposite films were used as response to analysis of variance for data analysis. The linearity of the normal distribution curve for the remainder confirmed the correctness of the presented model. Two and three- dimensional Graphs of surface design method showed that tensile strength increases by increasing the weight percentage of carbon nanotubes to 0.66%. While more than it reduces the tensile strength. Also, by reducing the drying temperature of the film and increasing the sonication time, tensile strength increase. Some physicochemical properties of the nanocomposite films were investigated using FT-IR spectroscopy, SEM, TGA techniques.
Keywords
Nanocomposites
polyvinyl chloride
polyaniline
carbon nanotubes
response surface method

Subjects

[1] Fischer H., Polymer Nanocomposites: From Fundamental Research to Specific Applications, Materials Science and Engineering: C, 23: 763-777 (2003).
[2] Yong KS., Sung WK., Recent Advances in Polymeric Drug Delivery Systems., Biomaterials Research, 24: 1-12 (2020).
[3] Hosseini Zavvar Mahalleh SR., Gasemi Mir Sh., Puorsadegh Limuee Sh., Preparation of Cobalt Oxide Nanofibers by Electrospinning and Their Application for Electro-Catalysis of Ethylene Glycol Oxidation, Iranian Journal of Chemistry and Chemical Engineering, 38: 11-21 (1398).
[4] www.wikipedia.com/en/nanocomposites.
[5] Bhagwan F., Jogi MK., Brahmankar PK., Ratna, D., Some Studies on Mechanical Properties of Epoxy/CTBN/Clay Based Polymer Nanocomposites (PNC), Procedia Mater. Sci. 5: 787-797 (2014).
[6] Helal AI., Vshivkov SA., Zaki MF., Elkalashy SI.,  Soliman TS., Effect of Carbon Nano Tube in the Structural and Physical Properties of Polyvinyl Chloride Films, Phys. Scr. 96: 085804 (2021). 
[7] Hirlekar R., Yamagar M., Garse H., Vij M., Kadam V., Carbon Nanotubes and its Applications: a Review, Asian Journal of Pharmaceutical and Clinical Research. 2(4): 17–27 (2009).
[8] AlNaim AF., AlFannakh H., Arafat S., Ibrahim SS., Characterization of PVC/MWCNTs Nanocomposite: Solvent Blend, Sci Eng Compos Mater, 27: 55–64 (2020).
[9] Zhang ZN., Zhang J., Chen P., Zhang Q., JS., “Enhanced Interactions Between Multi-Walled Carbon Nanotubes and Polystyrene Induced by Melt Mixing”, Carbon, 44: 692–698 (2006).
[10] Kazukauskas V., Kalendra V., Bumby CW., Ludbrook BM., Kaiser AB., Electrical Conductivity of Carbon Nanotubes and Polystyrene Composites, Phys Stat Sol C, 5: 3172-3174 (2008).
[11] Wang Z., Lu M., LiH L., Guo XY., SWNTs–Polystyrene Composites Preparations and Electrical Properties Research, Mater Chem Phys, 100: 77-81 (2006).
[12] Broza G., Piszczek K., Schulte K., Sterzynski T., Nanocomposites of Poly(vinyl chloride) with Carbon Nanotubes (CNT), Composites Sci. and Technol, 67: 890-894 (2007).
[13] Mahmoud AM., Abd El-Rahman MK., Elghobashy M.R., Mamdouh RR., Carbon Nanotubes Versus Polyaniline Nanoparticles; Which Transducer Offers More Opportunities for Designing a Stable Solid Contact Ion-Selective Electrode, J. ELECTROANAL. CHEM. 755: 122-126 (2015).
[14] Vasanthkumar MS., Bhatiab R., Vedprakash A., Sameera I., Prasad V., and Jayanna H.S., Characterization, Charge Transport and Magnetic Properties of Multi-Walled Carbon Nanotube–Polyvinyl Chloride Nanocomposites., Physica E: LECT. NOTES. PHYS. and nanostructure. 56: 10-16(2014).
[15] Sudarisman DIJ., The Effect of Processing Parameters on the Flexural Properties of Unidirectional Carbon Fibre-Reinforced Polymer (CFRP) Omposites, Materials Science and Engineering., 498A: 65-58: (2008).
[16] Wan Y., Xiong C., Yu J., Wen D., Effect of Processing Parameters on Eectrical  Resistivity and Thermo-Sensitive Properties of Carbon-Black/Styrene–Butadiene–Rubber Composite Membranes., Composites Science and Technology., 65: 1769-1779 (2005).
[17] Cotu F., Panzera TH., Schiaron MA., Christoforo AL., Borges R., Bowen C., Scarpa F., Full Factorial Design Analysis of Carbon Nanotube Polymer-Cement Composites.,  Materials Research., 15: 573-580,  (2012).
[18]  Khatibi A., Ebrahimi kahrizsangi R., Ghashang M., The Effect of Temperature and pH on the Nano TiO2/Carbon Composite Microspheres Morphology Synthesized by Solvothermal Method, Journal of Advanced Processes in Materials Engineering, 9: 193-203(1394).
[19] Olalekan ST., Alkathib MF., Yusof F., Shah QH., Muyibi S.A., Improving the Polypropylene-Clay Composite Using Carbon Nanotubes as Secondary Filler., Journal of Materials Science and Engineering., 5: 139-144 (2011).
[20] Myers RH., Montogomery DC., Response Surface Methodology: Process and Product in Optimization Using Designed Experiments., New York: John Wiley & sons., 6 (1995).
[21]Abbas Farmand R., Farbodi M., Physicochemical and Antibacterial Properties of Synthesized Polyaniline-Chitosan-Nanosilver Hybrid Nanocomposite, Iranian Journal of Polymer Science and Technology, 29: 323-333 (2016).
[22] Ashraf MA., Peng W., Zare Y.,Top Ree k., Effects of Size and Aggregation/Agglomeration of Nanoparticles on the Interfacial/Interphase Properties and Tensile Strength of Polymer Nanocomposites, Nanoscale Res Lett, 13: 214 (2018).