Nashrieh Shimi va Mohandesi Shimi Iran

Nashrieh Shimi va Mohandesi Shimi Iran

Determination of Copper Ions in Arak Water Using Electro-Spun Nano Fiber Impregnated with Ligand Adsorbent

Document Type : Research Article

Authors
Somaye Mashhadi 1
Hosein Mardani Tudeshki 2
Mohammad Alimoradi 2
1 Young Researchers and Elite Club, Arak Branch, Islamic Azad University, Arak, I.R. IRAN
2 Department of Chemistry, Arak Branch, Islamic Azad University, Arak, I.R. IRAN
Abstract
In this work, the Nanofibers were synthesized using electrospun of polystyrene solution in DMF/ THF solvent. The important parameters such as voltage, the distance between injector and collector, speed injection, the concentration of polystyrene and speed rotation of collectors in electrospun technique were optimized. Results showed that, within certain limits, by increasing the voltage, high Electro distance, low injection rate and high speed of the collector, we will get the Nanofibers with diameters less and regular chain structure. In optimal conditions, the average of polystyrene fibers diameter was 70-102 nm. Polystyrene absorbent modified by dithizone. By selecting the best conditions, the modified polystyrene Nanofibers were produced with an average diameter of 73-126 nm. The synthesized polystyrene Nanofibers were used for preconcentration of Copper in wastewater samples. The effective parameter on extraction such as adsorbent amount, pH, type and volume of eluent solvent and salt amount was evaluated and optimized with “one at the time” method. According to the results, optimum conditions are the solid phase: 0/006 gr, pH = 7, eluent solvent: acetonitrile solution with a volume of 0/7 mL, 1/3 g amount of potassium nitrate salt. This method was applied to real samples and good results were obtained. High enrichment factors and very good detection limit are highlights of this method.
Keywords
Electro-Span
Nanofibers
Polystyrene
Modifier
copper
Solid phase extraction

Subjects

[1] Ulrich A.M., Dahoun B., G'Sell A., Spherulitic Morphology of Isotactic Polypropylene Investigated by Scanning Electron Microscopy, Polymer.(P), 34(23):4817-4825 (1993).
[2] Baumgarten P.K., Electrostatic Spinning of Acrylic Microfibers, J. Colloid. Interf. Sci. (JCIS), 36:75-79 (1971).
[3] Benicewicz B.C., Hopper P.K., Polymers for Absorbable Surgical Sutures, J. Bioact. Compat. Polym.(JBCP), 6:64-94 (1991).
[4] Nasouri K., Bahrambeygi H., Rabbi A., Shoushtari A.M., Kaflou A., Modeling and Optimization of Electrospun PAN Nanofiber Diameter Using Response Surface Methodology and Artificial Neural Networks, Applied Polymer Science.(APS), 126:127-135 (2012).
[5] Sabetzadeh N., Bahrambeygi H., Rabbi A., Nasouri K., Thermal Conductivity of Polyacrylonitrile Nanofibers Web in Various Nanofibers Diameter and Surface Densities, Micro & Nano Letter.(MNL), 7:662-666 (2012).
[6] Bahrambeygi H., Sabetzadeh N., Rabbi A., Nasouri K., Shoushtari A.M., Babaei M.R., Nanofibers (PU and PAN) and Nanoparticles (Nanoclay and MWNTs) Simultaneous Effects on Polyurethane Foam Sound Absorption, Journal of Polymer Research.(JPR), 20:74-84 (2013).
[7] Nasouri K., Shoushtari A.M., Kaflou A., Bahrambeygi H., Rabbi A., Single-Wall Carbon Nanotubes Dispersion Behavior and Its Effects on the Morphological and Mechanical Properties of the Electrospun Nanofibers, Polymer Composites.(PC), 33:1951-1959 (2012).
[8] Saeed S.M., Zandi M., Mirzadeh H., Effect of Soloution Surface Tension on Morphology of PLGA and Gelatin Electrospun Fibers, Iranian Journal of Polymer Science and Technology.(IJPST), 25:3-10 (2012).
[9] Yao C., Li X., Song, T., Fabrication of Zein/Hyaluronic Acid Fibrous Membranes by Electrospinning, J. Biomater. Sci. Polym. Ed.(JBSPE), 18(6):731-742 (2007).
[10] Chen Z., Mo X., Qing F., Electrospinning of Collagen–Chitosan Complex, Mater. Lett.(ML), 61(16):3490–3494 (2007).
[11] Um I.C., Fang D., Hsiao B.S., Okamoto A., Chu B., Electro-Spinning and Electro-Blowing of Hyaluronic Acid, Biomacromolecules.(B), 5(4):1428-36 (2004).
[12] Casper C.L., Yamaguchi N., Klick K.L., Rabolt J.F., Functionalizing Electrospun Fibers with Biologically Relevant Macromolecules, Biomacromolecules.(B), 6(4):1998-2007 (2005).
[13] Ding B., Yu J., “Electrospun Nanofibers for Energy and Environmental Applications”, Springer-verlag, Berlin (2014).
[14] Abdouss M., Musavi A., Fabrication of Chelating Diethylenetriamine Pan Micro and Nano Firbers for Heavy Metal removal, Chemical Industry and Chemical Engineering Quartetly, 18(1): 27-34 (2012).
[15] مختاری شوریجه، زهرا؛ رفیع زاده، مهدی؛ محمدی، مهرنوش؛ تهیه نانوالیاف پلی اکریلونیتریل و اصلاح شده سطحی با دی اتیلن تری آمین برای جذب کادمیم، نشریه آب و فاضلاب، 3: 12 تا 19 (1395).
[16] Huang, F., Xu, Y., Liao, Sh., Yang, D., Hsieh, Y., Preparation of Amidoxime Polyacrylonitrile Chelating Nanofibers and Their Application for Adsorption of Metal Ions, Materials, 6: 969-980 (2013)
[17] Thurman E.M., "Solid Phase Extraction: Principles and Practice", john Willeg, New york (1998).
[18] موسوی راد، سید مرتضی؛ تأثیر روش های تبادل یونی و استخراج با حلال آلی بر حذف فلزهای بالقوه سمی از فاز آبی پساب کارخانه های صنعتی، نشریه شیمی و مهندسی شیمی ایران، (4) 33: 43 تا 52 (1393).
[19] طلعت مهراباد، ژیلا؛ شیخلوئی، حسین؛ ارجمندی راد، فرزاد؛ اندازه گیری مقدار جزیی سرب در نمونه‌های زیست محیطی و زیستی به روش میکرو‌استخراج با یک قطره مایع یونی و اسپکتروسکوپی جذب اتمی الکتروترمال، نشریه شیمی و مهندسی شیمی ایران، (4) 33: 61 تا 68 (1393).
[20] Neo Y.P., Ray S., Easteal A. J., Nikolaidis M. G., Quek S. Y., Influence of Solution and Processing Parameters Towards the Fabrication of Electrospun Zein Fbers with Sub-Micron Diameter, Journal of Food Engineering.(JFE), 109: 645–651 (2012).
[21]  Tana S-H., Inai R., Kotaki M., Ramakrishna S., Systematic Parameter Study for Ultra-Fine Fiber Fabrication Via Electrospinning Process, Polymer.(P), 46:6128–6134 (2005).
[22] Shenoya S.L., Bates W.D., Frisch H.L., Wnek G.E., Role of Chain Entanglements on Fber Formation During Electrospinning of Polymer Solutions: Good Solvent, Non-Specific Polymer–Polymer Interaction Limit, Polymer.(P), 46: 3372–3384, (2005).
[23] Fong H., Chun I., Reneker D.H., Beaded Nanofibers Formed During Electrospinning, Polymer.(P), 40: 4585–4592 (1999).
[24] Ramakrishna S., Fujihara K., Teo W., Lim T., Ma Z., "An Introduction to Electrospinning and Nanofibers", World Scientific Publishing Co. Pte. Ltd (2005).
[25] Andrady A.L., " Science and Technology of Polymer Nanofibers", John Wiley & Sons Inc. (2008).
[26] Son W.K., Youk J.H., Lee T.S., Park W.H., The Effects of Solution Properties and Polyelectrolyte on Electrospinning of Ultrafine Poly(Ethylene Oxide) Fbers, Polymer.(P),  45:2959–2966 (2004).
[27] Deitzel J.M., Kleinmeyer J., Harris D., Tan N.C.B., The Effect of Processing Variables on the Morphology of Electrospun Nanofibers and Textiles, Polymer.(P), 42: 261–272 (2001).
[28] Megelski S., Stephens J.S., Chase, D.B., Rabolt J.F., Micro- and Nanostructured Surface Morphology on Electrospun Polymer Fibers, Macromolecules.(M), 35: 8456 -8466 (2002).
[29] Yuan X., Zhang Y., Dong C., Sheng J., Morphology of Ultrafine Polysulfone Fibers Prepared by Electrospinning, Polymer International .(PI), 53: 1704–1710 (2004).