Nashrieh Shimi va Mohandesi Shimi Iran

Nashrieh Shimi va Mohandesi Shimi Iran

Demulsification of Water in Crude Oil via Biodegradable Cellulosic Polymer

Document Type : Research Article

Authors
Mojtaba Binazadeh
Mehran Sarani
School of Chemical and Petroleum Engineering, Shiraz University, Shiraz, I.R. IRAN
Abstract
Water in crude oil emulsions in the upstream oil industry causes serious problems such as corrosion and precipitation. Therefore, it is of crucial importance to demulsify and separate water at the production site. Demulsifiers’ performance is evaluated by its demulsification efficiency, cost, and biocompatibility. Restrictive environmental regulations have resulted in an ongoing effort to identify and characterize new demulsifiers which offer biodegradability while maintaining demulsification efficiency. In this study, biocompatible and biodegradable cellulosic polymers with trade names Walocel, Cellulose Acetate, Methocel-K3, and Methocel-E5 were used as demulsifiers. Demulsifiers’ performance was evaluated by bottle test using crude oil from the Sarvestan oil field. The initial tests revealed that Walocel and Methocel-E5 have better performance as compared with Cellulose acetate and Methocel-K3. It was found that increasing temperature up to 80 ⁰C and increasing demulsifier concentration up to 3000 ppm results in faster and more efficient demulsification. 90% separation of water at 80 ⁰C and a demulsifier concentration of 3000 ppm was achieved within 2 hours by Methocel-E5 while the same separation took 4 hours for Walocel. After 12 hours of demulsification at 80 ⁰C and a demulsifier concentration of 3000 ppm, Walocel and MEthocel-E5 could demulsify and separate 99% and 98% of the initial water respectively
Keywords
Demulsifier
Water in crude oil emulsion
Demulsification
Biocompatible
Biodegradable

Subjects

[1] مزارعی, سید رضا؛ اسماعیلی، حسین؛ جعفری، داریوش، "جداسازی امولسیون آب از نفت با استفاده از ماده امولسیون زدا"، سومین کنفرانس بین­المللی دستاوردهای نوین پژوهشی در شیمی و مهندسی شیمی، کنفدراسیون بین ­المللی مخترعان جهان (IFIA): تهران (1395)
[2] Langevin D., Poteau S., Henaut I., Argilier J.F., Crude Oil Emulsion Properties and Their Application to Heavy Oil Transportation. 59: 511-521 (2004)
[3] Shehzad, F., Hussein I.A., Kamal M.S., Ahmad W., Sultan A.S., Nasser, M.S., Polymeric Surfactants and Emerging Alternatives Used in the Demulsification of Produces Water: A Review. Polymer Reviews, 58(1): 63-101 (2018)
[4] مزارعی, سیدرضا؛ اسماعیلی، حسین؛ جعفری، داریوش،" تعیین بهترین شرایط در جداسازی آب از امولسیون نفتی با استفاده از امولسیون زدا"، سومین کنفرانس بین­المللی دستاوردهای نوین پژوهشی در شیمی و مهندسی شیمی، کنفدراسیون بین ­المللی مخترعان جهان (IFIA): تهران (1395)
[5] Al-Sabagh, A.M., Kandile N.G., Noor El-Din M.R., Functions of Demulsifiers in the Petroleum Industry. Separation Science and Technology, 46(7): 1144-1163 (2011)
[6] ایرانپور، سعید؛ مهدوی، حسین؛ محمودیان، مهدی، "سورفکتانت های پلیمری، گذشته، حال، آینده"، سومین همایش علوم و فناوری مواد فعال سطحی و صنایع شوینده، دانشکده مهندسی شیمی و نفت دانشگاه شریف (1391)
[7] Raffa, P., A.A. Broekhuis, F. Picchioni, Polymeric Surfactants for Enhanced Oil Recovery: A Review. Journal of Petroleum Science and Engineering, 145: 723-733 (2016)
[8] Liu, H. Y.-L. Hsieh, Ultrafine Fibrous Cellulose Membranes from Electrospinning of Cellulose Acetate. 40: 2119-2129 (2002)
[9] کشاورز، حسین؛ اسفندیاری، نادیا، "بررسی روش­ های نمک زدایی از نفت خام"، سومین همایش ملی نفت و گاز و صنایع وابسته، دانشگاه شهید باهنر کرمان (1394)
[10] Roostaie T., Farsi M., Rahimpour M.R., Biniaz P., Performance of Biodegradable Cellulose Based Agents for Demulsification of Crude Oil: Dehydration Capacity and Rate. Separation and Purification Technology, 179: 291-296 (2017)
[11] Zolfaghari, R., Fakhrul-Razi A., Abdullah L.C., Elnashaei S.E.H., Pendashteh A., Demulsification Techniques of Water-in-Oil and Oil-in-Water Emulsions in Petroleum Industry. Separation and Purification Technology, 170: 377-407 (2016)
[12] Kokal S., Al-Juraid J., “Quantification of Various Factors Affecting Emulsion Stability: Watercut, Temperature, Shear, Asphaltene Content, Demulsifier Dosage and Mixing Different Crudes”, SPE Annual Technical Conference and Exhibition., Society of Petroleum Engineers: Houston, Texas. (1999)
[13] Feng X., Wang S., Hou J., Wang L., Cepuch C., Masliyah J., Xu Z., Effect of Hydroxyl Content and Molecular Weight of Biodegradable Ethylcellulose on Demulsification of Water-in-Diluted Bitumen Emulsions. Industrial & Engineering Chemistry Research, 50(10): 6347-6354 (2011)
[14] Razi, M., Rahimpour, M.R., Jahanmiri A., Azad F., Effect of a Different Formulation of Demulsifiers on the Efficiency of Chemical Demulsification of Heavy Crude Oil. Journal of Chemical & Engineering Data, 56(6): 2936-2945 (2011)
[15] Alsabagh, A.M., Hassan M.E., Desouky S.E.M., Nasser N.M., Elshakary E.A., Abdelhamid M.M., Demulsification of W/O Emulsion at Petroleum Field and Reservoir Conditions Using Some Demulsifiers Based on Polyethylene and Propylene Oxides. Egyptian Journal of Petroleum, 25(4): 585-595 (2016)
[16] Feng, X., Xu Z., Masliyah J., Biodegradable Polymer for Demulsification of Water-in-Bitumen Emulsions. Energy & Fuels, 23(1): 451-456 (2009)
[17] Hou, J., Feng X., Masliyah J., Xu Z., Understanding Interfacial Behavior of Ethylcellulose at the Water–Diluted Bitumen Interface. Energy & Fuels, 26(3): 1740-1745 (2012)
[18] Natarajan, A., Kuznicki N., Harbottle D., Masliyah J., Zeng H., Xu Z., Molecular Interactions Between a Biodegradable Demulsifier and Asphaltenes in an Organic Solvent. Energy & Fuels, 30(12): 10179-10186 (2016)
[19] عبادی، شهرزاد؛ رسولی گرمارودی، اسماعیل؛ رمضانی، امید؛ بهروز اشکیکی، ربیع، " استات سلولز: فرآورده ای پایدار و زیست تخریب پذیر با کاربردهای ویژه"، دومین همایش ملی فن آوری های نوین در صنایع چوب و کاغذ، دانشگاه آزاد اسلامی واحد چالوس: چالوس. (1393)
[20] مهدی خانی،حسن؛ جلالی ترشیزی، حسین، "مروری بر تولید و کاربردهای کربوکسی متیل سلولز"،  دومین همایش ملی فن آوری­ های نوین در صنایع چوب و کاغذ، دانشگاه آزاد اسلامی واحد چالوس: چالوس (1393)
[21] Gullapalli R.P. Sheth B.B., Effect of Methylcellulose on the Stability of Oil-in-Water Emulsions: Influence of the Disperse Phase. International Journal of Pharmaceutics, 151: 249-253 (1997)
[22] Fischer, S., Thummler K., Volkert K., Hettrich K., Schmidt I., Fischer K., Properties and Applications of Cellulose Acetate. Macromolecular Symposia, 262(1): 89-96 (2008)
[23] Su J.F., Huang Z., Yuan X.Y., Wang X.Y., Li M., Structure and Properties of Carboxymethyl Cellulose/Soy Protein Isolate Blend Edible Films Crosslinked by Maillard Reactions. Carbohydrate Polymers, 79(1): 145-153 (2010)
[24] Biniaz P., Farsi M., Rahimpour M.R., Demulsification of Water in Oil Emulsion Using Ionic Liquids: Statistical Modeling and Optimization. Fuel, 184: 325-333 (2016)
[25] Van Ginkel, C.G., Gayton S., The Biodegradability and Nontoxicity of Carboxymethyl Cellulose (DS 0.7) and Intermediates. Environmental Toxicology and Chemistry, 15(3): 270-274 (1996)
[26] Rimdusit, S., Jingjid S., Damrongsakkul S., Tiptipakorn S., Takeichi T., Biodegradability and Property Characterizations of Methyl Cellulose: Effect of Nanocompositing and Chemical Crosslinking. Carbohydrate Polymers, 72: 444-455 (2008)