Nashrieh Shimi va Mohandesi Shimi Iran

Nashrieh Shimi va Mohandesi Shimi Iran

Simulation of the Effect of Micro/Nanoparticles on Pressure Drop in Oil Pipeline

Document Type : Research Article

Authors
Ali Ghamartale
Rahmatollah Saboori
Samad Sabbaghi
Department of Nano Chemical Engineering, Faculty of Advanced Technologies, Shiraz University, Shiraz, I.R. IRAN
Abstract
One of demanding issues that engineers encounter in the production of highly viscous oils is the high-pressure drop of oil moving across the pipeline. A wide range of methods have been introduced to overcome this problem, and among them, the chemical injection is considered to have a dramatic effect on viscosity and hence the pressure drop reduction. In this study, the role of nanoparticles in oil production is simulated using Pipesim software, and the level of pressure drop in the pipeline is estimated. In addition, the pressure drop was investigated with changing the type and concentration of particles, temperature, the inner diameter of the pipe, oil’s flow rate and the flow type in order to detect the effect of each parameter. Results suggested that microparticles of copper with 0.1 wt% concentration prompt the lowest pressure drop per unit length. At lower temperatures, the concentration of microparticles dictates the level of pressure drop while at a higher temperature, the effect of temperature is dominant. Moreover, we founded that in higher flow rates, the presence of particles desirably reduces the pressure drop, regardless of their amount. The pressure drop in laminar and turbulent flow demonstrated to have a direct relation with viscosity, while in the transient flow the viscosity reduction was followed by an increase in pressure drop.
Keywords
Nano/micro-particles
Pressure drop
Pipeline
oil
Viscosity
Pipesim

Subjects

[1] Green D. W., Willhite G. P., “Enhanced Oil Recovery”, Henry L. Doherty Memorial Fund of AIME, Society of Petroleum Engineers, Richardson, Texas, (1998).
[2] Energy Information Administration, “International Energy Annual”, Product: DOE/EIA-0219, (2002).
[3] Energy Information Administration, “System for the Analysis of Global Energy Markets”. Appendix 1 of the International Energy Outlook. Report: DOE/EIA-0484, (2006).
[4] The Many Technological and Economic Challenges of Extra-Heavy Oil- See More at: http://www.total.com.
[5] Hao H.R., Su H.J., Chen G., Zhao J.R., Hong L., Viscosity Reduction of Heavy Oil by Aquathermolysis with Coordination Complex at Low Temperature. The Open Fuels & Energy Science Journal, 8: 93-98 (2015).
[6] Chen Y., Wang Y., Lu J., Wu C., The Viscosity Reduction of Nano-keggin-K3PMo12O40 in Catalytic Aquathermolysis of Heavy Oil. Fuel, 88(8): 1426-1434 (2009).
[7] Torsater O., Engeset B., Hendraningrat L., Suwarno S., Improved Oil Recovery by Nanofluids Flooding: An Experimental Study, “SPE Kuwait International Petroleum Conference and Exhibition”, 10-12 December, Kuwait City, Kuwait, (2012).
[8] Kazemzadeh Y., Malayeri M.R., Riazi M., Parsaei R., Impact of Fe3O4 Nanoparticle on Asphaltene Precipitation During CO2 Injection, Journal of Natural Gas Science and Engineering, 22: 227-234 (2014).
[9] Onyekonwu M.O., Ogolo N.A., Investigating the use of Nanoparticles in Enhancing Oil Recovery, “Nigeria Annual International Conference and Exhibition”, 31 July - 7 August, Tinapa - Calabar, Nigeria, (2010).
[10] Karimi A., Fakhroueian Z., Bahramian A., Pour Khiabani N., Babaee Darabad J., Azin R., Arya S., Wettability Alteration in Carbonates using Zirconium Oxide Nanofluids: EOR Implications, Energy Fuels, 26 (2): 1028–1036(2012).
[11] Ettefaghi E., Ahmadi H., Rashidi A., Mohtasebi S., Alaei M., Experimental Evaluation of Engine Oil Properties Containing Copper Oxide Nanoparticles as a Nanoadditive, International Journal of Industrial Chemistry, 4 (1): 28-33 (2013).
[12] Eistein A., On the Motion – Required by the Molecular Kinetic Theory of Heat – of Small Particle Suspended in a Stationary Liquid, Annalen Der Physic, 17(4): 549-560 (1905).
[13] Hyne J.B., “Aquathermolysis”, Synopsis Report No. 50. AOSTRA Contracts No. 11, 103, 103 B/C, 1986.
[14] Alboudwarej H., Pole D., Svrcek W.Y., Yarranton H. W., Adsorption of Asphaltenes on Metals, Ind. Eng. Chem. Res., 44: 5585-5592 (2005).
[15] Hamedi Shokrlu Y.,Babadagli T., Transportation and Interaction of Nano and Micro Sized Metal Particles Injected to Improve Thermal Recovery of Heavy Oil, “SPE Annual Technical Conference and Exhibition”, 30 October-2 November, Denver, Colorado, USA, (2011).
[16] Hamedi Shokrlu Y., Babadagli T., Effect of nano Sized Metals on Viscosity Reduction of Heavy Oil/Bitumen During Thermal Applications, “Canadian Unconventional Resources and International Petroleum Conference”, 19-21 October, Calgary, Alberta, Canada, (2010).
[17] Omole O., Olieh M.N., Osinowo T., Thermal Visbreaking of Heavy Oil from Nigerian Tar Sand, Fuel, 78 (12): 1489-1496 (1999).
[18] Ogolo N.A., Olafuyi O.A., Onyekonwu M.O., Enhanced Oil Recovery Using Nanoparticles, “SPE Saudi Arabia Section Technical Symposium and Exhibition”, 8-11 April, Al-Khobar, Saudi Arabia, (2012).
[19] Skauge T., Spildo K., Skauge A., Nano sized particles for EOR, “SPE Improved Oil Recovery Symposium”, 24-28 April, Tulsa, Oklahoma, USA, (2010).
[20] Qiu F., The Potential Applications in Heavy oil EOR with the Nano Particle and Surfactant Stabilized Solvent-based Emulsion, “Canadian Unconventional Resources and International Petroleum Conference”, 19-21 October, Calgary, Alberta, Canada, (2010).
[21] Chen Y., Wang Y., Lu J., Wu C., The Viscosity Reduction of Nano-Keggin-K3PMO12O40 in Catalytic Aquathermolysis of Heavy oil, Fuel, 88: 1426–1434 (2009).
[22] Afzal S., Ehsani M.R., Nikookar M., Khodabandeh-Shahraki A.R., Roayaei E., Mohammadi A.H., “Reduction of Heavy Oil Viscosity Using Nanoparticles in Book Enhanced Oil Recovery: Methods, Economic Benefits and Impacts on the Environment”, Nova Science Publishers, Inc., Alicia Knight, NY, USA, (2015).
[23] Li W., Zhu J., Qi J., Application of Nano-Nickel Catalyst in the Viscosity Reduction of Liaohe-Heavy Oil by Aquathermolysis, J. Fuel ChemTechnol, 35 (2): 176-180 (2007).
[24] Jain S., Goossens J.G.P., P       eters G.W.M., Duin M.V., Lemstra P.J., Strong Decrease in Viscosity of Nano Particle-Filled Polymer Mlts Through Selective Adsorption, Soft Matter, 4(9): 1848-1854 (2008).
[25] Schlumberger, “Pipesim User Manual”, Well Design, Drilling and Petroleum, (2009).
[26] Bjørnseth F., “Heavy Oil Production Technology Challenges and the Effect of Nano Sized Metals on the Viscosity of Heavy Oil: A Literature Review and an Experimental Study”, Norwegian University of Science and Technology, (2013).