Nashrieh Shimi va Mohandesi Shimi Iran

Nashrieh Shimi va Mohandesi Shimi Iran

Silica Aerogel-Filled Polycarbonate Planes: Innovative Energy-Efficient Daylighting Systems in Different Buildings

Document Type : Research Article

Authors
Taher Yousefi Amiri
Hasan Bargozing
Maryam Farhadipoor
Zeinab Jamali
Department of Chemical Engineering, University of Zanjan, Zanjan, I.R. IRAN
Abstract
Windows have the most contribution to energy loss through the buildings envelope. One of the offered solutions to improve the energy efficiency of the windows and glazing units is the filling of the vacant space of the multilayer glazing systems with aerogel.  Aerogels are the lightest commercialized solids and have the lowest thermal conductivity among solid materials. Furthermore, their good acoustic insulation as well as daylight and solar energy transmittance properties, make them interesting insulation materials that can be used in the vacant space of multilayer glazing units. Multilaye r polycarbonate planes recently have found extensive applications in buildings. In this work, the vacant space, air gaps, of the polycarbonate planes were filled with silica aerogel and their thermal performance as an innovative glazing system was investigated. Polycarbonate planes with different thicknesses (5-15 mm) were filled with granular aerogels and the amount of reduction in the heat loss through the planes at different temperatures (40-70oC) was measured. Also, the effect of aerogel granule size on the thermal efficiency of the planes was investigated. Granule size in the range of 2-3 mm showed the best performance. Depending on the plane thickness, applied temperature, and aerogel granule size, the energy loss through aerogel-filled planed is reduced 21 to 66 % in comparison with conventional air-filled planes. Typically, the U-value of the 10 mm polycarbonate plane was reduced from 2.74 W/m2K in the air-filled plane to 1.1 W/m2K in the aerogel-filled plane.
Keywords
Silica aerogel
Polycarbonate planes
Thermal properties
Energy consumption
Building

Subjects

[1] Berardi U., The Development of a Monolithic Aerogel Glazed Window for an Energy Retrofitting Project, Applied Energy, 154: 603-615 (2015).
[2] Buratti C., Moretti E., Experimental Performance Evaluation of Aerogel Glazing Systems, Applied Energy, 97: 430-437 (2012).
[3] Cotana F., Pisello A. L., Moretti E., Buratti C., Multipurpose Characterization of Glazing Systems with Silica Aerogel: In-Field Experimental Analysis of Thermal-Energy, Lighting and Acoustic Performance, Building and Environment, 81: 92-102 (2014).
[4] Gao T., Jelle B. P., Ihara T., Gustavsen A., Insulating Glazing Units with Silica Aerogel Granules: the Impact of Particle Size, Applied Energy, 128: 27-34 (2014).
[5] Ihara T., Gao T., Grynning S., Jelle B. P., Gustavsen A., Aerogel Granulate Glazing Facades and Their Application Potential from an Energy Saving Perspective, Applied Energy, 142: 179-191 (2015).
[6] Gao T., Ihara T., Grynning S., Jelle B. P., Lien A. G., Perspective of Aerogel Glazings in Energy Efficient Buildings, Building and Environment, 95: 405-413 (2016).
[7] Buratti C., Moretti E., Glazing Systems with Silica Aerogel for Energy Savings in Buildings, Applied Energy, 98: 396-403 (2012).
[8] Garnier C., Muneer T., McCauley L., Super Insulated Aerogel Windows: Impact on Daylighting And Thermal Performance, Building and Environment, 94: 231-23 (2015).
[9] Cha J., Kim S., Park K. W., Lee D. R., Jo J. H., Kim S., Improvement of Window Thermal Performance Using Aerogel Insulation Film for Building Energy Saving, Journal of Thermal Analysis and Calorimetry, 116: 219-224 (2014).
[10] Baetens R., Jelle B. P., Gustavsen A., Aerogel Insulation For Building Applications:  A State-of-The-Art Review, Energy and Buildings, 43: 761-769 (2011).
[11] Rubin M., Lampert C. M., Transparent Silica Aerogels for Window Insulation, Solar Energy Materials, 7: 393-400 (1983).
[12] Abdul Mujeebu M., Ashraf N., Alsuwayigh A. H., Effect of Nano Vacuum Insulation Panel and Nanogel Glazing on the Energy Performance of Office Building, Applied Energy, 173: 141-151 (2016).
[13] Huang Y., Niu J-l., Energy and Visual Performance of the Silica Aerogel Glazing System in Commercial Buildings of Hong Kong, Construction and Building Materials, 94: 57-72 (2015).
[14] Huang Y., Niu J-l., Application of Super-Insulating Translucent Silica Aerogel Glazing System on Commercial Building Envelope of Humid Subtropical Climates – Impact on Space Cooling Load, Energy, 83: 316-325 (2015).
[15] Abdul Mujeebu M., Ashraf N., Alsuwayigh A., Energy performance and Economic Viability of Nano Aerogel Glazing and Nano Vacuum Insulation Panel in Multi-Story Office Building, Energy, 113: 949-956 (2016).
[16] Chen Y., Xiao Y., Zheng S., Liu Y., Li Y., Dynamic Heat Transfer Model and Applicability Evaluation of Aerogel Glazing System in Various Climates of China, Energy, 163: 1115-1124 (2018).
[17] Wang H., Wu H., Ding Y., Feng J., Wang S., Feasibility and Optimization of Aerogel Glazing System for Building Energy Efficiency in Different Climates, International Journal of Low-Carbon Technologies, 10: 412-419 (2015).
[18] Jensen K. I., Schultz J. M., Kristiansen F. H., Development of Windows Based on Highly Insulating Aerogel Glazings, Journal of Non-Crystalline Solids, 350: 351-357 (2004).
[19] Schultz J. M., Jensen K. I., Evacuated Aerogel Glazings, Vacuum, 82: 723-729 (2008).
[20] Schultz J. M., Jensen K. I., Kristiansen F. H., Super Insulating Aerogel Glazing, Solar Energy Materials and Solar Cells, 89: 275-285 (2005).
[21] Lv Y., Wu H., Liu Y., Huang Y., Xu T., Zhou X., et al., Quantitative Research on the Influence of Particle Size and Filling Thickness on Aerogel Glazing Performance, Energy and Buildings, 174: 190-198 (2018).
[22] Lv Y., Huang R., Wu H., Wang S., Zhou X., Study on Thermal and Optical Properties and Influence Factors of Aerogel Glazing Units, Procedia Engineering, 205: 3228-3234 (2017).
[23] Liu Y., Chen Y., Li Y., Zheng S., Solar Extinction Coefficient of Silica Aerogel Calculated through Integral Model and Experimental Data, Procedia Engineering, 205: 1253-1258 (2017).
[24] Reim M., Körner W., Manara J., Korder S., Arduini-Schuster M., Ebert H.-P., Fricke J. Silica Aerogel Granulate Material for Thermal Insulation and Daylighting. Solar Energy, 79: 131-139 (2005).
 [25] Moretti E., Zinzi M., Carnielo E., Merli F., Advanced Polycarbonate Transparent Systems with Aerogel: Preliminary Characterization of Optical and Thermal Properties, Energy Procedia, 113: 9-16 (2017).
[26] Moretti E., Zinzi M., Merli F., Buratti C., Optical, Thermal, and Energy Performance of Advanced Polycarbonate Systems with Granular Aerogel, Energy and Buildings, 166: 407-417 (2018).