Nashrieh Shimi va Mohandesi Shimi Iran

Nashrieh Shimi va Mohandesi Shimi Iran

Investigation of the Effect of the Support Layer on Pervaporation Performance of Supported Mixed Matrix Membranes in Separation of Water and Isopropanol

Document Type : Research Article

Authors
Zohreh Raeisi 1
Ahmad Moheb 2
Morteza Sadeghi 2
Mohaddeseh Najafi 2
1 Department of Chemistry, Dehloran Branch, Islamic Azad University, Dehloran, I.R.IRAN
2 Chemical Engineering Department, Isfahan University of Technology, Isfahan, I.R.IRAN
Abstract
In this report, mixed matrix membranes which are supported by polyethersulfone and sulfonated polyethersulfone prepared for dehydration of isopropanol. The prepared membranes are composed of a porous sublayer from polyethersulfone/sulfonated polyethersulfone and a composite top layer of poly(vinyl alcohol) and titanate nanotubes. In fact, hydrothermally-synthesized titanate nanotubes are dispersed in poly(vinyl alcohol). Moreover, the sulfonated polyethersulfone are used to investigate the effects of the porous sublayer on mass transport and the separation performance of the membranes. Next, the ability of the prepared membranes were studied for pervaporation separation of 90 wt% aqueous isopropanol mixture at 50 . The obtained results indicate that the thickness and chemical properties of the support have had a significant influence on pervaporation results. Totally, decreasing the difference between hydrophilicity of top layer and support has resulted in formation of an ideal interface between the layers. Furthermore, the presence of sulfone groups in interface, formation of hydrogen bounds among hydroxyl groups of poly(vinyl alcohol) and sulfone groups of the sublayer are responsible for enhanced compatibility between the layers. As a result, selective separation of water through the membranes was obtained. In addition, the results indicated that the support led to existence of an additional mass transport in isopropanol dehydration as well as requiring the physical support for the resultant membranes. The obtained results showed that when 4 wt% titanate nanotubes were dispersed in poly(vinyl alcohol) which was supported by sulfonated polyethersulfone the flux and separation factor were about  0.29 kg/m2 h and 4828, respectively.
Keywords
Pervaporation
Supported Mixed Matrix Membranes
Polyethersulfone
Sulfonation
Titanate Nanotubes

Subjects

[1] Ameri E., Moheb A., Roodpeyma S., Vapor-Permeation-Aided Esterification of Isopropanol/Propionic Acid using NaA and PERVAP® 2201 Membrane, Chem. Eng. J., 162: 355–363 (2010).
[2] Hu S.Y., Zhang Y., Lawless D., Feng X., Composite Membranes Comprising of Polyvinylamine-Poly(Vinyl Alcohol) Incorporated with Carbon Nanotubes for Dehydration of Ethylene Glycol by Pervaporation, J. Membr. Sci., 417–418: 34-44 (2012).
 [3] Lu J., Nguyen Q., Zhou J., Ping Z.H., Poly(Vinyl Alcohol)/Poly(Vinyl Pyrrolidone) Interpenetrating Polymer Network: Synthesis and Pervaporation Properties, J. Appl. Polym. Sci., 89: 2808-2814 (2003).
[4] Skoulidas A.I., Ackerman D.M., Johnson J.K., Sholl D.S., Rapid Transport of Gases in Carbon Nanotubes, Phys. Rev. Lett., 89: 185901 (2002).
[5] Shirazi Y.,  Tofighy M.A., Mohammadi T., Synthesis and Characterization of Carbon Nanotubes/Poly Vinyl Alcohol Nanocomposite Membranes for Dehydration of Isopropanol, J. Membr. Sci., 378: 551-561 (2011).
[6] Zheng J.,  Li M., Yu K., Hu J.,  Zhang X.,  Wang L., Sulfonated Multiwall Carbon Nanotubes Assisted Thin-Film Nanocomposite Membrane with Enhanced Water Flux and Anti-Fouling Property, J.  Membr. Sci., 524: 344-353 (2017).
[7] Fontananova E., Grosso V., Aljlil S.A., Bahattab M.A., Vuono D., Nicoletta F.P., Curcio E., Drioli E., Profio G.D., Effect of Functional Groups on the Properties of Multiwalled Carbon Nanotubes/Polyvinylidenefluoride Composite Membranes, J. Membr. Sci., 541: 198-204 (2017).
[8] Liu G., Yang D., Zhu Y., Ma J., Nie M., Jiang Z., Titanate Nanotubes-Embedded Chitosan Nanocomposite Membranes with High Isopropanol Dehydration Performance, Chem. Eng. Sci., 66: 4221-4228 (2011).
[9] Raeisi Z., Moheb A., Sadeghi M., Abdolmaleki A., Alibouri M., Titanate Nanotubes–Incorporated Poly(Vinyl Alcohol) Mixed Matrix Membranes for Pervaporation Separation of Water-Isopropanol Mixtures, Chem. Eng. Res. Des., 145: 99-11 (2019).
[10] Wang M.G.Y., Chung T.S., Pervaporation Dehydration of Ethylene Glycol through Polybenzimidazole (PBI)-based Membranes. 1. Membrane Fabrication, J. Membr. Sci., 363: 149-159 (2010).
[11] Tan S., Li L., Zhang Z., Wang Z., The Influence of Support Layer Structure on Mass Transfer in Pervaporation of Composite PDMS–PSF Membranes, Chem. Eng. J., 157: 304-310 (2010).
[12] Devi D.A., Smitha S., Sridhar S., Aminabhavi T.M., Pervaporation Separation of Dimethylformamide/Water Mixtures through Poly(Vinyl Alcohol)/Poly(Acrylic Acid)Blend Membranes, Sep. Purif. Tech., 51: 104-111 (2006).
[13] Torabi B, Ameri E., Methyl Acetate Production by Coupled Esterification-Reaction Process using Synthesized Cross-Linked PVA/Silica Nanocomposite Membranes, Chem. Eng. J., 288: 461-472 (2016).
[14] Shameli A., Ameri E., Shesis of Cross-Linked PVA Membranes Embedded with Multi-Wall Carbon Nanotubes and their Application to Esterification of Acetic Acid with Methanol, Chem. Eng. J., 309: 381-396 (2017).
[15] Hyder M.N., Huang R.Y.M., Chen P., Effect of Selective Layer Thickness on Pervaporation of Composite Poly(Vinyl Alcohol)–Poly(Sulfone) Membranes, J. Membr. Sci., 318: 387-396 (2008).
[16] Vankelecom I.F.J., Moermans B., Verschueren G., Jacobs P.A., Intrusion of PDMS Top Layers in Porous Supports, J. Membr. Sci., 158: 289-297 (1999).
[17] Feng X., Huang R.Y.M., Separation of Isopropanol from Water by Pervaporation using Silicone-based Membranes, J. Membr. Sci., 74: 171-181 (1992).
[18] Huang R.Y.M., Pal R., Moon G.Y., Crosslinked Chitosan Composite Membrane for the Pervaporation Dehydration of Alcohol Mixtures and Enhancement of Structural Stability of Chitosan/Polysulfone Composite Membranes, J. Membr. Sci., 160: 17-30 (1999).
[19] Panahian S., Raisi A., Aroujalian A., Multilayer Mixed Matrix Membranes Containing Modified-MWCNTs for Dehydration of Alcohol by Pervaporation Process, Desal., 355: 45-55 (2015).
[20] Amirilargani M., Tofighy M.A., Mohammadi T., Sadatnia B., Novel Poly(Vinyl Alcohol)/Multiwalled Carbon Nanotube Nanocomposite Membranes for Pervaporation Dehydration of Isopropanol: Poly(Sodium 4-Styrenesulfonate) as a Functionalization Agent, Indust. Eng. Chem. Res., 53: 12819-12829 (2014).
[21] Li L., Wang Y., Sulfonated Polyethersulfone Cardo Membranes for Direct Methanol Fuel Cell, J. Membr. Sci., 246: 167-172 (2005).
[22] Rahimpour A., Madaeni S.S., Ghorbani S., Shockravi A., Mansourpanah Y., The Influence of Sulfonated Polyethersulfone (SPES) on Surface Nano-Morphology and Performance of Polyethersulfone (PES) Membrane, Appl. Surf. Sci., 256: 1825-1831 (2010).
[23] Heydari M., Moheb A., Ghiaci M., Masoomi M., Effect of Cross-Linking Time on the Thermal and Mechanical Properties and Pervaporation Performance of Poly(Vinyl Alcohol) Membrane Cross-Linked with Fumaric Acid used for Dehydration of Isopropanol, J. Appl. Polym. Sci., 128: 1640-1651 (2013).
[24] Martos A.M., Sanchez J.Y., Várez A., Levenfeld B., Electrochemical and structural characterization of sulfonated polysulfone, Polym Test., 45: 185-193 (2015).
[25] Geng J., Jiang Z., Wang Y., Yang D., Carbon-Modified TiO2 Nanotubes with Enhanced Photocatalytic Activity Synthesized by a Facile Wet Chemistry Method, Scripta Materialia, 59: 352-355 (2008).
[26] Sairam M., Patil M.B., Veerapur R.S., Patil S.A., T.M. Aminabhavi, Novel Dense Poly(Vinyl Alcohol)–TiO2 Mixed Matrix Membranes for Pervaporation Separation of Water–Isopropanol Mixtures at 30°C, J. Membr. Sci., 281: 95-102 (2006).
[27] Muniyappan S., Solaiyammal T., Sudhakar K., Karthigeyan A., Murugakoothan P., Conventional Hydrothermal Synthesis of Titanate Nanotubes: Systematic Discussions on Structural, Optical, Thermal and Morphological Properties, Mod. Elect. Mater., 3: 174-178 (2017).
[28] Sahu A.K., Selvarani G., Bhat S.D., Pitchumani S., Sridhar P., Shukla A.K., Narayanan N., Banerjee A., Chandrakumar N., Effect of Varying Poly(Styrene Sulfonic Acid) Content in Poly(Vinyl Alcohol)–Poly(Styrene Sulfonic Acid) Blend Membrane and its Ramification in Hydrogen–Oxygen Polymer Electrolyte Fuel Cells, J. Membr. Sci., 319: 298-305 (2008).
[29] Amirilargani M., Ghadimi A., Tofighy M.A., Mohammadi T., Effects of Poly (Allylamine Hydrochloride) as a New Functionalization Agent for Preparation of Poly Vinyl Alcohol/Multiwalled Carbon Nanotubes Membranes, J. Membr. Sci., 447: 315-324 (2013).
[30] Sajjan A.M., Jeevan Kumar B.K., Kittur A.A., Kariduraganavar M.Y., Novel Approach for the Development of Pervaporation Membranes using Sodium Alginate and Chitosan-Wrapped Multiwalled Carbon Nanotubes for the Dehydration of Isopropanol, J. Membr. Sci., 425-426: 78-88 (2013).
[31] Razavi S., Sabetghadam A., Mohammadi T., Dehydration of Isopropanol by PVA–APTEOS/TEOS Nanocomposite Membranes, Chem. Eng. Res.Des., 89: 148-155 (2011).
[32] Zhang Q.G, Liu Q.L., Chen Y., Chen J.H., Dehydration of Isopropanol by Novel Poly(vinyl alcohol)−Silicone Hybrid Membranes, Indust. Eng. Chem. Res., 46: 913-920 (2007).
[33] Gao Z., Yue Y., Li W., Application of Zeolite-Filled Pervaporation Membrane, Zeolites, 16: 70-74 (1996).
[34] Adoor S.G., Prathab B., Manjeshwar L.S., Aminabhavi T.M., Mixed Matrix Membranes of Sodium Alginate and Poly(Vinyl Alcohol (for Pervaporation Dehydration of Isopropanol at Different Temperatures, Polymer, 48: 5417-5430 (2007).